Student with a cable to the study area
Wants a reliable connection behind thick walls and can connect mesh nodes by cable.
If you can run a network cable to the study area, Ethernet backhaul means the mesh nodes won’t have to connect through the thick wall wirelessly. If you can’t run a cable, powerline may be an alternative, using your home’s electrical wiring; fully wireless mesh is best suited to situations where an intermediate node can still receive a usable signal. No stated Wi-Fi speed or coverage area can guarantee an uninterrupted lesson in your home.
Wants a reliable connection behind thick walls and can connect mesh nodes by cable.
Can’t install Ethernet and wants to find out whether the electrical wiring can be used to connect mesh nodes.
Wants to reach an extra study area without installing new cables, and needs to consider placement and the existing router.
First decide how the mesh nodes will connect to each other. Then check that the connection is good enough where you’ll be studying.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Ethernet connection | Check whether the system supports Ethernet backhaul, which ports each node has and whether you can run a cable to the study area. | If I’d rather not have the mesh nodes connect wirelessly through the thick wall, I’ll look for a wired route. Around 36% of consumers in this situation give Ethernet top priority. |
| Powerline without a network cable | Check that the nodes you’ve chosen support the same powerline technology and that the app shows powerline backhaul after installation. | If I can’t run a network cable, I want to know whether my home’s electrical wiring can connect the nodes. Around 29% of consumers give powerline top priority. |
| Placing wireless nodes | Find a spot where the intermediate node can still receive a usable connection, then test the study area. | If I don’t want a cable between the nodes, I want to try an intermediate location where the node can still get a signal. Around 21% of consumers give fully wireless placement top priority. |
| Keeping your existing router | Check the connection method, router or access point mode, and compatibility with your existing mesh devices. | If I want to keep my current router or mesh setup, I want to know how the new system will connect to it. Around 14% of consumers give keeping their existing setup top priority. |
The extra mesh node still needs to receive a connection from the rest of the network.
Try an intermediate location and test the connection there. If necessary, compare it with a wired or suitable powerline setup.
An extra node or a different placement could mean more installation and moving about, without improving the connection in the study area.
According to TP-Link, the Deco PX50 does not provide powerline backhaul with the Deco PX10, P7 or P9.
Check the full model names and powerline compatibility before combining mesh nodes.
A product specification or coverage claim won’t tell you how the connection will perform behind a particular wall or in your study area.
First choose how the mesh nodes will connect to each other, then check whether the picture and sound remain stable where you’ll be studying.
According to TP-Link, the Deco X50 supports Ethernet backhaul, while the Deco PX50 uses G.hn powerline alongside Wi-Fi.
The ZenWiFi XD5 is a mesh option with Ethernet backhaul if there are suitable Ethernet ports in your walls.
The FRITZ!Repeater 3000 AX is an extension option to consider if you already use a compatible FRITZ!Box.
This selection includes mesh Wi-Fi systems for extending coverage to multiple rooms. Several models list a wired backhaul option; check the connection options and mesh nodes included with each system to see what suits your study area.
No image available
A three-unit mesh set for extending Wi-Fi across multiple rooms.
The product information lists dual-band and Wi-Fi 5 (802.11ac).
No image available
An option to consider if you want to connect mesh nodes using wired backhaul.
The product information lists Wi-Fi 7 (802.11be) and a wired backhaul option.
No image available
The two-unit set may suit you if you want to connect mesh nodes using Ethernet backhaul.
The product information lists Wi-Fi 6 and the option to set up Ethernet backhaul between the units.
No image available
A three-unit set for extending Wi-Fi to multiple rooms.
The product information lists Wi-Fi 6 and three gigabit Ethernet ports per unit. Check that the connections suit your cable route.
No image available
This two-unit mesh set is worth considering if Ethernet is available where you want to place the units.
The product information lists Wi-Fi 6, PoE support and two Ethernet ports per unit.
Don’t place the node only where the signal is weak: it also needs to receive a connection from the rest of the network. Try an intermediate location, then test the connection in the study area.
Yes. TP-Link describes both router mode and access point mode. If your existing router needs to keep managing the network, access point mode is usually the right setup. Follow the connection instructions for the mode you’ve chosen.
According to TP-Link, you can check the network map in the Deco app to see whether the satellite node’s connection is via powerline. TP-Link also says that the PX50 power adapter has no status LED.
According to the Dutch Authority for Digital Infrastructure, Wi-Fi can be used in the Netherlands without a licence, notification or registration. Use the correct country and frequency settings and follow the relevant terms of use; licence-free use does not prevent interference.
According to the Dutch government, online purchases from a business often come with a 14-day cooling-off period. Products are also covered by the statutory guarantee of satisfactory quality; if a product is faulty, contact the seller. Check the terms that apply to your specific purchase.