Who is this choice relevant to?

Home worker with a cable route

You want to connect your downstairs workspace to the rest of your home and can run an ethernet cable between floors. Check that the system supports ethernet backhaul and that enough ports will be left for your equipment. TP-Link Netherlands describes wired connections between Deco nodes as an option.

Home worker without an ethernet cable

Thick walls make a wireless connection between mesh nodes unreliable, and you want to know whether your existing electrical wiring can help. With powerline backhaul, what’s possible depends on compatible nodes and your electrical installation; TP-Link explains the requirements for the Deco PX50.

Home worker who needs a wireless setup

You can’t run a cable and want to find a place for an intermediate node where it will still receive a strong enough signal. Actual coverage depends on factors including walls, floors, layout and interference, as explained by TP-Link Netherlands and the Consumers’ Association.

What should you look for when choosing?

Mesh with ethernet backhaul

Choose this if: you can run an ethernet cable to or near your workspace.

Bear in mind: you’ll need to install or have access to a suitable cable route; Wi-Fi at your desk will still depend on where you position the nodes.

Mesh with powerline backhaul

Choose this if: there’s no ethernet cable and your nodes can communicate via the electrical wiring.

Bear in mind: the electrical installation and the sockets you use can affect the connection. Not all models are compatible with each other for powerline backhaul.

Fully wireless mesh

Choose this if: you can position a mesh node somewhere it will still get a strong enough signal from the main node.

Bear in mind: walls, floors and interference affect the connection; an extra frequency band alone doesn’t guarantee good coverage through thick walls.

The percentages show which consideration consumers can prioritise when making this choice.

What to consider What should you check? Who is this important for?
Connection between floors Check whether ethernet backhaul is supported and whether you have enough ports for the cable between the nodes and your equipment. According to TP-Link, the Deco X50 has three gigabit ports per node. If I work downstairs and can run a cable, I want the connection between nodes not to depend on getting a signal through thick walls. Around 36% of consumers prioritise a stable wired connection.
Powerline as an alternative to a cable Check that the nodes are compatible with powerline backhaul and can be plugged into suitable wall sockets. If running a cable isn’t an option, I want to know whether the electrical wiring can connect the mesh nodes. Around 29% of consumers give a connection without an ethernet cable top priority.
Positioning wireless nodes Test whether there’s a spot where the intermediate node still gets a strong enough signal, then check the connection at your desk. If I can’t use a cable or powerline connection, a wireless node needs to be positioned somewhere it can still get a signal. Around 21% of consumers prioritise having this flexibility.
Existing router and everyday use Check the router or access point mode, the connections you need and the power consumption of the whole system. If I want to keep using my existing network without leaving too much equipment switched on unnecessarily, the mode and number of nodes matter. Around 14% of consumers prioritise integration and everyday use.

Things to watch out for when buying

  • Assuming the advertised coverage area guarantees a signal downstairs

    Actual coverage depends on factors including walls, floors, layout and interference. So an advertised coverage area doesn’t automatically tell you how well the signal will reach your workspace.

    First, find out how the mesh nodes communicate with each other, then test the spots you’re considering around your home.

  • Assuming every Deco can provide powerline backhaul with a PX50

    TP-Link says the PX50 doesn’t provide powerline backhaul with the Deco PX10, P7 or P9.

    Check the exact models and powerline compatibility of both nodes before combining them.

    You may need a second, compatible PX50 node for the powerline connection you want.

  • Plugging a powerline node into an extension lead without checking

    According to TP-Link, filtered extension leads and certain electrical installations can disrupt communication between nodes.

    Try plugging the nodes directly into wall sockets and check in the app whether the powerline connection is working.

  • Connecting every mesh node as a router without checking first

    According to TP-Link, incorrectly connecting a Deco in router mode to your existing router can create a network loop.

    Choose router or access point mode deliberately and follow the connection diagram for that mode.

Brands to consider

TP-Link

The Deco range includes models with different options for connecting mesh nodes, including ethernet backhaul and, on the PX50, G.hn powerline backhaul.

  • According to TP-Link, the PX50 can connect nodes via your electrical wiring when walls interfere with a wireless connection.
  • The PX50 doesn’t provide powerline backhaul with the Deco PX10, P7 or P9. Performance also depends on your electrical installation and where you position the nodes; TP-Link recommends plugging them directly into wall sockets.

ASUS

The ZenWiFi AX XT8 is a tri-band Wi-Fi 6 system. ASUS also documents ethernet backhaul for AiMesh and ZenWiFi setups.

  • ASUS lists three frequency bands and a 2.5G port for the XT8.
  • These specifications don’t show how well the signal will travel through the walls of a particular home. ASUS has specific setup requirements for wired connections via a switch.

NETGEAR

The Orbi 870 Series is a tri-band Wi-Fi 7 range with wired connections worth considering when comparing systems.

  • NETGEAR lists a 10G internet port and 2.5G wired connections for the 870 Series.
  • These connections don’t show that Wi-Fi will travel better through thick internal walls. Check the exact bundle model and whether you need the extra connection options for your network.

Mesh products on Joybuy

These Joybuy mesh systems are worth comparing for a downstairs workspace. Check the connections available on each model, how the nodes communicate with each other and where they need to be positioned.

TP-Link Deco E4 mesh system with three nodes, dual-band Wi-Fi 5

TP-Link Deco E4 (3-pack)

This three-node mesh system is an option if you want to position several nodes around your home.

Dual-band Wi-Fi 5 on 2.4 and 5 GHz. According to the product description, the ethernet ports have a maximum speed of 100 Mbps.

Joybuy
TP-Link Deco X20 mesh system with two nodes, Wi-Fi 6

TP-Link Deco X20 (AX1800, 2-pack)

This two-node system may suit you if you want to use ethernet backhaul and can run an ethernet cable between the mesh nodes.

The product information lists Wi-Fi 6 and ethernet backhaul between the Deco X20 units.

Joybuy
TP-Link Deco X50 mesh system with three nodes, dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack)

A three-node system to compare if you want to bring mesh Wi-Fi to several areas of your home.

Dual-band Wi-Fi 6. According to the product information, each node has three gigabit ethernet ports; TP-Link lists ethernet backhaul as an option for the X50.

Joybuy
TP-Link Deco X50-POE mesh system with two nodes, Wi-Fi 6

TP-Link Deco X50-POE (2-pack)

This system is worth considering if you want to compare wired setups with PoE, where power and data travel through a single ethernet cable.

Dual-band Wi-Fi 6 and two ethernet ports per node, according to the product information.

Joybuy
TP-Link Deco XE75 Pro tri-band Wi-Fi 6E mesh system with three nodes

TP-Link Deco XE75 Pro (3-pack)

This three-node system is an option to compare if you want to use several nodes.

Tri-band Wi-Fi 6E on 2.4, 5 and 6 GHz. According to the product information, each node has three ethernet ports.

Joybuy

Frequently asked questions

Where should I put a wireless mesh node for my downstairs workspace?

Don’t put it straight away in the spot with the weakest signal without testing first. Try an intermediate location where the node can still connect to the main node, then check the signal at your desk. Walls, floors and interference all affect the result.

Can mesh work alongside my existing modem or router?

That depends on the system and the mode you choose. For Deco, TP-Link describes access point mode as an option when your existing router continues to manage network functions; the connection rules differ from those for router mode.

Can I use different Deco models for one powerline connection?

Check compatibility for the exact models: TP-Link says a Deco PX50 won’t provide powerline backhaul with the PX10, P7 or P9. Also check that your electrical installation supports the connection between the nodes.

What should I consider when it comes to power consumption and the guarantee?

Compare the energy consumption of the whole system, as mesh nodes are usually left on all the time. If a product is faulty under normal conditions of use in the Netherlands, you can claim your statutory consumer rights from the seller. These are separate from any manufacturer’s guarantee and don’t have a fixed, general two-year time limit.

Do I need a permit or registration to use Wi-Fi at home in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, home use of Wi-Fi frequencies designated for licence-exempt use does not require a permit, provided you meet the conditions of use. There’s no notification or registration requirement for using these licence-exempt frequencies.