Who is this choice relevant to?

Studio with enclosed workspaces

Needs usable Wi-Fi on both sides of thick internal walls and can check whether cables can be run between rooms. TP-Link describes Ethernet backhaul for Deco; in this setup, the connection between mesh points runs over Ethernet.

Team using the network at the same time

Needs to account for multiple work devices, available Ethernet ports and the capacity of the local network. An advertised Wi-Fi speed is not a measure of performance in the studio.

Shared studio with visitors

Needs to keep visitors’ devices separate from work devices and check in advance what network separation the chosen equipment and configuration provide. Ubiquiti describes network and client isolation as separately configurable UniFi features.

What should you look for when choosing?

Mesh with Ethernet backhaul

Suitable when: you can run cables to workspaces beyond the walls and want to manage a single mesh network.

Bear in mind: you’ll need to install cables and, for PoE models, provide a compatible power source.

Wireless mesh

Suitable when: cabling isn’t practical and a test in the intended locations confirms a usable connection between the points.

Bear in mind: walls, distance and interference affect the wireless connection; a tri-band specification doesn’t prove how it will perform in this studio.

Wired access points

Suitable when: cables are available and managing each room or separating users is important.

Bear in mind: the design and configuration need careful consideration; check which features the complete setup actually provides.

Consideration What should you check? Who is this important for?
Coverage beyond walls Check Ethernet backhaul for each model. For wireless mesh, test the connection between points in their intended locations. If I want to work on both sides of a thick wall, a usable connection in those spots is my top priority. Around 36% of consumers in this decision-making context put coverage beyond walls first.
Multiple people working online at once Count active devices and wired connections; compare the number of ports and their speed for the exact model. If several colleagues use networked devices at the same time, I want to know whether the local capacity and connections are up to the job. Around 29% of consumers prioritise simultaneous work use and wired connections.
Guest separation Check that network isolation and, where needed, client isolation are available and configured across the complete router, switch and Wi-Fi setup. If visitors use Wi-Fi, I want to be able to separate their access from work devices. Around 21% of consumers put this separation at the top of their list.
Connecting to your existing router Check the supported router or access point mode and the network topology. For PoE, check the compatible standard and the switch’s power budget. If I want to keep using my existing router or cabling, the new system needs to work with it. Around 14% of consumers prioritise easy integration with their existing network.

Things to watch out for when buying

  • Assuming the advertised coverage area is a guarantee

    Each mesh point needs to have a usable connection to the network. The Dutch Authority for Digital Infrastructure highlights differences in range and interference between frequency bands.

    Assess the connection in each workspace. If cabling is practical, include Ethernet backhaul in your comparison.

    Installing cables may involve extra work.

  • Mistaking an add-on unit for a complete network

    The Joybuy offer for the Deco X55 described in the product information includes one point; TP-Link says that at least two points are needed for a new mesh network.

    Check how many points are in the box and whether you already have a compatible Deco network.

    You may need an additional compatible unit.

  • Assuming a guest network automatically separates everything

    Ubiquiti describes network isolation and client isolation as separate configuration steps; the name ‘guest network’ alone doesn’t tell you how traffic is restricted in your setup.

    Test both access to work devices and communication between guest devices in your chosen configuration.

  • Assuming PoE and purchase terms are the same for every model

    PoE requires compatible power equipment. The hardware version determines which specifications apply. The statutory cooling-off period for online consumer purchases doesn’t automatically apply to a business purchase.

    Before buying, check the hardware version, power method, seller and applicable business terms.

    A suitable PoE switch and installation may be required.

Brands to compare

TP-Link

The Deco range includes mesh options that you can compare with wired connections. The Dutch product information for the Deco X50-PoE V2 lists PoE and wall or ceiling mounting.

  • TP-Link describes Ethernet backhaul for Deco, and router and access point modes for the X50-PoE.
  • For PoE, TP-Link specifies a compatible IEEE 802.3at or 802.3bt power source. Check the hardware version of the product on offer before relying on V2 specifications.

ASUS

ZenWiFi AX (XT8) is a tri-band mesh system for anyone considering wireless backhaul; ASUS also documents wired AiMesh setups.

  • ASUS describes the XT8 as having a dedicated wireless band for backhaul.
  • This product specification isn’t a measure of coverage beyond the walls of this studio. If you use a switch, follow ASUS’s connection and configuration requirements.

Ubiquiti

UniFi is an option worth exploring if managing each room and separating visitors’ devices from work devices are important.

  • Ubiquiti documents network isolation and client isolation as configurable UniFi features.
  • Check that the features you need are available and correctly configured in your specific setup. Ubiquiti also highlights shared airtime and interference.

NETGEAR

Orbi offers a mesh option with wireless satellites or, with compatible equipment, an Ethernet connection between the router and satellites.

  • NETGEAR documents both backhaul options.
  • Update the firmware before setting up Ethernet backhaul. General support for the feature doesn’t prove how it will perform in a studio with thick walls.

Joybuy products

This selection includes mesh systems for wireless connections and models where Ethernet backhaul is a consideration. For each specific model, check the connection between points, the number of units and how it connects to your existing network.

TP-Link Deco E4 (3-pack), dual-band Wi-Fi 5 mesh system

TP-Link Deco E4 (3-pack), dual-band Wi-Fi 5 (2.4 GHz/5 GHz)

A set of three mesh units for anyone looking to extend Wi-Fi across several workspaces.

The product name specifies dual-band Wi-Fi 5 (802.11ac) and two network ports per unit. Before buying, check whether this exact model supports Ethernet backhaul.

Joybuy
ASUS ZenWiFi BT8 (2-pack), tri-band Wi-Fi 7 mesh system

ASUS ZenWiFi BT8 (2-pack), tri-band Wi-Fi 7 (2.4 GHz/5 GHz/6 GHz)

A two-pack for anyone considering a wireless mesh setup; test whether the points can reach each other in their planned locations.

The product name specifies tri-band and Wi-Fi 7 (802.11be). These specifications alone can’t predict coverage through the studio walls.

Joybuy
TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-Pack

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-Pack

A two-pack for anyone looking to set up mesh across several rooms and explore wired connections between points.

The product name specifies AX1800 and Wi-Fi 6. For this exact model, check whether it supports Ethernet backhaul and the connection you need to your existing router.

Joybuy
TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6 mesh system

TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6 (802.11ax)

A set of three units for anyone looking to place mesh points in different workspaces.

The product information specifies three gigabit Ethernet ports per unit and Wi-Fi 6. TP-Link describes Ethernet backhaul for Deco; check that the connection suits your network topology.

Joybuy
TP-Link Deco X50-PoE (2-pack), dual-band Wi-Fi 6 mesh system

TP-Link Deco X50-PoE (2-pack), dual-band Wi-Fi 6 (802.11ax)

A two-pack for anyone looking into positioning mesh points using cabling and considering PoE.

The product name specifies Wi-Fi 6 and PoE. Before choosing a PoE switch, check the hardware version and the applicable power requirements for the exact model.

Joybuy

Frequently asked questions

How do you decide where to place the Wi-Fi points?

Start in work areas with a weak connection, then check where each additional point can get its own connection to the network. With wireless mesh, the connection between points also needs to be usable; with Ethernet backhaul, you can connect a point by cable. You can’t determine the number of points you need from an advertised coverage area alone.

Can mesh connect to the studio’s existing router?

That depends on the model and the mode you choose. TP-Link describes different cable topologies for Deco in router and access point modes, and says the X50-PoE supports both modes. Follow the installation instructions for the exact model.

What does installing PoE with the Deco X50-PoE involve?

According to TP-Link, the Deco X50-PoE requires a compatible IEEE 802.3at or 802.3bt power source for PoE. Check that the switch has suitable PoE ports and enough total power; TP-Link also lists a DC adapter as an alternative. Check the hardware version of the product on offer too.

What ongoing costs and maintenance should a studio consider?

Allow for possible cabling work, a PoE switch if needed and electricity use; the equipment required will depend on your setup. Also agree who will manage firmware updates and troubleshoot problems. If you’re buying as a business, the statutory cooling-off period for online consumer purchases doesn’t automatically apply; check the applicable terms of sale separately.

Do you need a frequency licence to use standard Wi-Fi for business in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, Wi-Fi can be used for personal and business purposes without a licence, notification or registration, provided the conditions for licence-exempt frequency use are met. Choose the correct country and frequency settings; licence-exempt use doesn’t guarantee an interference-free connection.