Who is this relevant to?

Presenter with an Ethernet cable

You give presentations in a room behind thick walls and can connect a mesh node there by cable. You want to know whether the system supports Ethernet backhaul and the right connection method.

Presenter without an Ethernet cable

You want to get a connection to the room without running a new Ethernet cable. You’re comparing powerline with a wireless mesh node that can be placed somewhere with a strong enough signal.

Presenter who wants to diagnose the problem first

You’re not sure whether dropouts are caused by the Wi-Fi connection between rooms, your internet connection or the placement of your equipment. You want to find the cause before buying a system.

What should you look for when choosing?

First, work out how the mesh nodes can connect to each other, then test the connection where you’ll be presenting. If you’re unsure, test the connection by cable at the router too. This will help you tell the difference between a local Wi-Fi issue and a problem with your internet connection.

Concern What to look for Who should pay particular attention?
Reliable connection between nodes Check for Ethernet backhaul support, the available ports and the cable route. After installation, check that the connection is actually using Ethernet. If I can run an Ethernet cable to the presentation room, I want to know whether the mesh nodes can use it for backhaul. Around 36% of consumers prioritise a wired connection between nodes.
No need for a new Ethernet cable Check the powerline standard, whether the units are compatible with each other and whether they can connect through your electrical wiring. Without a new Ethernet cable, I’m looking for a way to connect through the electrical wiring, but I want to know whether the units and the installation will work together. Around 29% of consumers prioritise this way of getting through walls.
Flexible wireless placement Test whether the mesh node still gets a strong enough signal in the chosen location, and try the connection from the presentation room. If I don’t want to use a cable or powerline, the extra node needs to maintain a wireless connection to the network. Around 21% of consumers prioritise this flexible placement.
Find the cause first Before deciding how many nodes you need, compare a wired test at the router with the connection where you’ll be presenting. I want to know whether the provider connection, router placement or local Wi-Fi is the limiting factor before choosing a mesh system. Around 14% of consumers start by diagnosing the problem to avoid an unnecessary purchase.

Common buying mistakes

  • Putting an extra wireless node somewhere the existing signal is almost gone

    The satellite node also needs to maintain a usable connection to the rest of the network.

    Test the signal in the intended location. If the wireless connection isn’t usable there, look into Ethernet backhaul or a suitable powerline setup.

    You may still need to find a different location or use a wired connection.

  • Assuming all Deco powerline units use the same connection

    According to TP-Link, the Deco PX50 uses G.hn powerline, while the PX10, P7 and P9 use HomePlug AV. TP-Link says these powerline backhaul technologies are not compatible with each other.

    Before adding to your system, check the exact models. After installation, check that the backhaul you want is active.

    An incompatible extra unit won’t provide the powerline connection you’re looking for.

  • Treating the stated Wi-Fi speed or coverage as a guarantee behind your walls

    Walls and equipment placement affect the connection. A mesh node also needs to maintain a connection to the network.

    Test the connection between the nodes and give a presentation at the location before basing your choice on the stated coverage.

    A larger system or extra nodes won’t automatically solve the real bottleneck.

  • Not testing your router or provider before buying mesh

    A slow internet connection could also be causing problems during your presentation.

    First, test the connection by cable at the router, then compare the result with the connection in the presentation room.

    This helps you avoid buying mesh to fix a problem outside your local Wi-Fi network.

Brands to consider

TP-Link

The Deco X50 and PX50 offer different ways to connect mesh nodes. The right choice depends partly on your cabling and electrical installation.

  • According to TP-Link, the Deco X50 has three gigabit ports and supports optional Ethernet backhaul.
  • The PX50 uses G.hn powerline alongside Wi-Fi.
  • According to TP-Link, the PX50 powerline backhaul is not compatible with the HomePlug AV backhaul used by the Deco PX10, P7 or P9.

ASUS

AiMesh and ZenWiFi are worth considering if you’re looking into a mesh setup with Ethernet backhaul.

  • ASUS describes connection options using switches, as well as a setting to prioritise Ethernet as the connection.
  • The right setup depends on your configuration. Check the ports, firmware and switch settings for the models you choose.

FRITZ!

A FRITZ!Repeater, such as the 3000 AX, is worth considering if you want to extend an existing FRITZ! network.

  • FRITZ! lists two gigabit LAN ports and the option to connect the 3000 AX to a FRITZ!Box via LAN.
  • If you’re using it with a different main router, check which FRITZ! ecosystem features will still be available.

NETGEAR

The Orbi 870 series may be worth considering if you’re also looking at a larger network with multi-gigabit ports.

  • NETGEAR lists a 2.5-gigabit wired backhaul option for the RBE873B set.
  • That specification doesn’t prove that the set will perform better behind your walls or that you need a higher stated wireless speed for a presentation.

Mesh Wi-Fi at Joybuy

This product selection focuses on mesh Wi-Fi for a presentation space behind thick walls, with an emphasis on wired backhaul where it’s specified for the model. Check how the mesh nodes can connect for each version.

ASUS ZenWiFi BD4 dual-band Wi-Fi 7 mesh system, white

ASUS ZenWiFi BD4 dual-band Wi-Fi 7

Worth considering if you want to connect the mesh nodes by cable. Check the supported backhaul and connection method for this version.

The product name lists Wi-Fi 7 and dual-band 2.4 GHz and 5 GHz.

View at Joybuy
TP-Link AX1800 Whole Home Mesh Wi-Fi 6 system, 2-pack

TP-Link AX1800 Whole Home Mesh Wi-Fi 6, 2-pack

A two-piece mesh setup to consider if you want to place a network node in the presentation room. Before buying, check the exact model name and whether this version supports Ethernet backhaul.

The product name lists Wi-Fi 6 and a 2-pack.

View at Joybuy
TP-Link Deco X50 mesh system, 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50, 3-pack, dual-band Wi-Fi 6

Worth considering if you can connect the mesh nodes with an Ethernet cable. TP-Link lists optional Ethernet backhaul for the Deco X50. Check the connection and installation instructions for your setup.

The product name lists dual-band Wi-Fi 6 and a 3-pack.

View at Joybuy
Linksys Velop Pro 7 tri-band Wi-Fi 7 mesh system

Linksys Velop Pro 7 tri-band Wi-Fi 7

A mesh option to compare if you’re considering a system with multiple frequency bands. Check how the mesh nodes connect to each other for the version you choose.

The product name lists tri-band 2.4 GHz, 5 GHz and 6 GHz, and Wi-Fi 7.

View at Joybuy
TP-Link Deco XE75 Pro mesh system, 3-pack, tri-band Wi-Fi 6E

TP-Link Deco XE75 Pro, 3-pack, tri-band Wi-Fi 6E

Worth considering if you’re looking at a three-node mesh setup. Check which backhaul options this version offers and whether they suit the route to your presentation room.

The product name lists tri-band 2.4 GHz, 5 GHz and 6 GHz, and Wi-Fi 6E.

View at Joybuy

Frequently asked questions

Do I need a faster internet package to give presentations without dropouts?

Not until you’ve found the cause. First, test your internet connection using a computer connected to the network by cable, then compare it with the connection where you’ll be presenting. Mesh can improve local coverage, but it won’t fix a problem with your provider’s connection.

Where do I connect a Deco satellite for Ethernet backhaul?

According to TP-Link, the connection depends on the mode. In router mode, connect the satellite to the LAN port on the main Deco or to a switch connected to it. In access point mode, TP-Link also describes connecting through the main modem or main router. Then check in the Deco app that Ethernet backhaul is active.

Can I use a Deco PX50 with a Deco P9 for powerline backhaul?

No, not for powerline backhaul. According to TP-Link, the PX50 uses G.hn and the P9 uses HomePlug AV. TP-Link says the PX50 powerline connection works between compatible PX50 units on the same electrical circuit.

What are my rights if a mesh system bought online isn’t suitable or is faulty?

For online consumer purchases, ACM ConsuWijzer says you generally have up to 14 days after delivery to change your mind, with some exceptions. The seller is also responsible for ensuring that a product meets legal requirements; a manufacturer’s guarantee doesn’t replace your statutory rights.

What requirements apply to wireless equipment sold in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, manufacturers, importers and sellers must comply with the relevant European requirements for radio equipment. The manufacturer applies a CE marking when the device meets all the requirements. Since 1 August 2025, the specified cyber security requirements have also been among the applicable requirements.