If you can run a network cable between the mesh nodes, first look for mesh systems with Ethernet backhaul and enough ports for your work devices. If you can’t run a cable, powerline could be an alternative to test at the sockets you plan to use. With wireless backhaul, the placement of the nodes and the obstacles between them are key. A higher Wi-Fi class alone does not guarantee a good connection through thick walls.
Who is this choice relevant to?
File sharer who can run cables
You share project files between workstations separated by thick walls and can run a cable between mesh nodes. Look for Ethernet backhaul and the ports you need. For example, TP-Link lists wired connectivity options for the Deco X50-PoE.
File sharer without a cable route
You can’t run a network cable between rooms and want to find out whether powerline or carefully positioned wireless mesh will work. The Consumers’ Association recommends placing Wi-Fi nodes with as few obstacles between them as possible.
Home worker with an existing router
You want to extend your coverage without replacing your provider’s setup unnecessarily. Check the connection method and available ports. ACM ConsuWijzer explains that you can choose your own network equipment, although conditions may depend on your connection.
What should you consider when choosing?
For sharing project files through thick walls, your choice mainly comes down to the connection between the mesh nodes, the ports available and where you place them.
Ethernet backhaul
Best suited to: when you can run a network cable between rooms and the connection between workstations is a priority.
Trade-off: running cables takes work; PoE may also require compatible power-supply equipment.
Powerline backhaul
Best suited to: when running a network cable isn’t practical and you can test the connection through the power sockets at home.
Trade-off: you can’t tell how well it will work in your home from the stated G.hn specification alone.
Wireless backhaul
Best suited to: when you can place the mesh nodes where they have a usable connection to each other.
Trade-off: thick walls and other obstacles can make it harder to connect the nodes; the Consumers’ Association recommends keeping obstacles to a minimum.
| What to consider |
What should you check? |
Who is this important for? |
| Connection between rooms |
Check whether the mesh system supports Ethernet backhaul and which ports are available. |
If I share project files between rooms and can run a cable, a reliable connection between the mesh nodes is my main priority. Around 36% of consumers prioritise this connection. |
| No cable route |
Check whether the system supports powerline backhaul, or work out where you can place wireless nodes with few obstacles between them. |
If I can’t run a network cable, I want to know whether powerline or a well-placed wireless connection will work. Around 29% of consumers prioritise coverage without a cable route. |
| Ports for work devices |
Count how many ports will remain after connecting the backhaul, and check their speed for the specific version. |
If I have several wired devices at my workstation, I want to know in advance whether I can connect them all. Around 21% of consumers give these connections their highest priority. |
| Fit and management |
Check how it connects to your existing router, as well as the security features and updates it supports. |
If I want to keep my current router setup, I look for a good fit and straightforward management without paying for features I don’t need. Around 14% of consumers prioritise this. |
Common pitfalls
-
Comparing only the stated Wi-Fi speed
A maximum Wi-Fi specification doesn’t tell you how quickly files will travel the whole route between two workstations. The connection between the mesh nodes, the ports and their placement all matter too.
Map the route from one device, through the mesh nodes, to the other device. Treat stated speeds as specifications, not as measurements taken in your home.
-
Putting a wireless mesh node behind the thickest wall
The new node still needs a usable connection to the rest of the network. If you place it where the signal is already dropping out, that connection may be too weak.
Try a location with fewer obstacles. If there isn’t one, look into Ethernet or powerline backhaul.
-
Treating PoE, Ethernet and powerline as the same thing
The Deco X50-PoE and Deco PX50 use different methods to connect mesh nodes or supply them with power.
Before buying, check the full model name, pack size, power supply and intended backhaul. Depending on your setup, you may need to run cables or use compatible PoE equipment.
Brands to compare
TP-Link
The Deco X50-PoE and Deco PX50 offer different options for connecting mesh nodes. TP-Link lists PoE and 2.5GbE ports for the X50-PoE, and G.hn powerline for the PX50.
- The two models suit different backhaul setups: wired with the X50-PoE or via your home’s electrical wiring with the PX50.
- These are different models, not interchangeable versions. The manufacturer’s specifications don’t prove how quickly files will travel through the walls in your home.
ASUS
The ZenWiFi XT9 is a tri-band Wi-Fi 6 model with router and access point modes. ASUS lists three gigabit LAN ports and one 2.5GbE WAN port.
- The listed modes and ports make it easier to plan how you’ll connect it to your workstation.
- The specifications don’t measure how the connection will perform through the walls of a particular home. Check the exact version of the set too.
FRITZ!
The FRITZ!Repeater 3000 AX is worth considering if you want to extend a FRITZ! mesh network. The product information lists two gigabit LAN connections.
- FRITZ! lists regular updates and a five-year manufacturer’s warranty for this model.
- If you use it with another router, check which mesh features will still be available.
NETGEAR
The Orbi RBK763S is a tri-band mesh system for which NETGEAR lists a dedicated wireless backhaul and gigabit ports.
- The listed backhaul is a model specification to include when comparing connection options.
- A dedicated band doesn’t prove that the connection will work well through particular thick walls. Check the exact set and the terms of any additional security services.
Mesh Wi-Fi options at Joybuy
These Joybuy products are mesh systems designed for multiple rooms, with a range of Wi-Fi specifications and connection options. Check the details of the exact version and make sure it suits the connection between your mesh nodes. The Dutch Authority for Digital Infrastructure states that wireless equipment sold in Europe must meet the applicable requirements and carry a CE mark; check this for the version on offer.
No image available
TP-Link Deco BE68 (2-pack)
An option to consider if you want to combine several mesh nodes with wired devices in your setup.
Wi-Fi 7; two units; WAN/LAN ports per unit at 10 Gbps, 2.5 Gbps and 1 Gbps. The product description lists wired and wireless backhaul.
View product
No image available
TP-Link Deco X50 (3-pack)
Worth considering if you’re looking for a mesh system with several nodes and wired connections for work devices.
Wi-Fi 6, dual-band (2.4 GHz/5 GHz), three units and three gigabit Ethernet ports per unit.
View product
No image available
TP-Link Deco XE75 Pro (3-pack)
An option to compare if you’re considering a tri-band mesh system with several nodes.
Wi-Fi 6E, tri-band (2.4 GHz/5 GHz/6 GHz) and three units.
View product
No image available
TP-Link Deco E4 (3-pack)
Worth comparing if you’re considering a mesh system with three nodes. For file transfers over a wired connection, check the stated port speed.
Wi-Fi 5, dual-band (2.4 GHz/5 GHz), three units and wired ports with a stated maximum speed of 100 Mbps.
View product
Frequently asked questions
Do I need to replace my provider’s modem to use my own mesh Wi-Fi?
Not necessarily. ACM ConsuWijzer explains that you can choose your own network equipment, but the connection and settings depend on your provider’s service and existing equipment. Check whether you’ll connect the mesh system to your current router or replace that router.
Where should I place a wireless mesh node if the walls are thick?
Don’t automatically put the node where the signal is already dropping out. According to the Consumers’ Association, Wi-Fi nodes work best with as few obstacles between them as possible. Use the system’s placement indicator and check the connection in the locations you’re considering.
Do I need a licence to use Wi-Fi at home in the Netherlands?
According to the Dutch Authority for Digital Infrastructure, no notification or registration is required to use designated licence-exempt frequencies and devices, including Wi-Fi. This alone does not tell you whether a specific device complies with the requirements.
What can I do if my mesh system develops a fault?
ACM ConsuWijzer states that your statutory guarantee applies in addition to any guarantee offered by the seller. If a fault develops, contact the seller to discuss the right solution for your situation.