Teacher with a teaching space behind thick walls
You teach from home in a room where the connection to your existing Wi-Fi point has to pass through internal walls. The connection between the mesh points is therefore an important consideration.
Start with the connection between the main unit and the point near your teaching space. Ethernet backhaul is a well-founded choice if there’s a network cable available there, while powerline is an alternative you can test on site. Without a cable, fully wireless mesh needs careful positioning; no stated Wi-Fi speed can guarantee a stable video lesson on its own. Also check your existing internet connection and confirm the ports and number of units before buying.
You teach from home in a room where the connection to your existing Wi-Fi point has to pass through internal walls. The connection between the mesh points is therefore an important consideration.
As well as coverage, you need a usable internet connection for video, audio and, if needed, screen sharing. The bandwidth required depends on the service and video settings you use.
You want to use other devices during lessons too, so you may also want to consider placement, network management and guest access.
Choose this when: there’s a usable network cable in or near your teaching space, or you can install one.
Bear in mind: you’ll need to install the cable and use the right ports and network connection. TP-Link describes ethernet backhaul for Deco as more stable and faster than Wi-Fi backhaul; this isn’t a measurement for every home.
Consider this when: installing a cable isn’t practical and the suitable points can connect via the same electrical wiring.
Bear in mind: results depend on the connection at your property. TP-Link says that the PX50’s powerline backhaul isn’t compatible with the PX10, P7 or P9.
Choose this when: there’s no cabling and you can position the units so they maintain a good wireless connection with each other.
Bear in mind: walls and distance can also weaken the connection between mesh points. Check the connection at the intended location.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Connection behind thick walls | Check where your modem, teaching space, ethernet cables and sockets are, then compare the backhaul options available at those locations. | If you teach behind thick walls, you’ll want to know whether the signal reaches your teaching space. Around 33% of consumers say getting a connection to that room is their top priority. |
| Live video lessons | First, test your internet speed over a wired connection. Then test video, audio and screen sharing from your teaching space using the service you teach with. For example, Zoom recommends 2.6 Mbit/s upload and 1.8 Mbit/s download for 720p group video via the web app; these aren’t universal requirements for lessons. | If you teach live, you’ll want to avoid interruptions to video or audio and take the requirements of your chosen service into account. Around 27% of consumers say video lessons are their top priority. |
| Connection and installation | Check the router or access point mode, ports, power requirements and the recommended connection between the main unit and satellites. | If you want to connect a kit to your existing home network, you’ll want to know in advance which connections and settings are required. Around 20% of consumers prioritise straightforward integration with their network. |
| Total cost and management | Compare how many points you need and check the features, firmware management and warranty terms. A newer Wi-Fi generation doesn’t determine performance on its own. | If you want to cover your teaching space properly without paying for unnecessary extras, consider the purchase price and ongoing management. Around 20% of consumers say total cost is their top priority. |
Those specifications don’t tell you how the connection between the units will perform in your home. Walls and distance can affect that connection too.
First, map out the backhaul route and test the connection from the intended teaching space.
A suitable solution may require extra cabling or a different position for the units.
TP-Link says that the PX50’s powerline backhaul isn’t compatible with the PX10, P7 or P9.
Check the full model names and compatibility before expanding your kit.
You may need a compatible additional unit to expand the system.
A wired speed test helps you tell the difference between an issue with your internet connection and a local Wi-Fi problem.
First, test using a network cable, then check the Wi-Fi in your teaching space.
This helps you avoid buying a mesh kit when the limitation is your internet connection itself.
Within the Deco range, connections between units vary by model: the PX50 uses G.hn powerline, the X50 supports optional ethernet backhaul, and the X50-PoE is designed for wired installation with PoE.
FRITZ! says that the Mesh Set 2700 can be connected to another router or via LAN to a fibre modem. Existing FRITZ!Box users can also compare compatible FRITZ!Repeaters.
AiMesh and ZenWiFi are options for setting up ethernet backhaul with compatible ASUS units.
These Joybuy products are mesh kits for home Wi-Fi coverage. Check how many points you need for each kit and which connection between the units is right for your home.
No image available
A kit with three mesh units for anyone looking to set up several Wi-Fi points at home.
Dual-band: 2.4 GHz and 5 GHz. The specified ethernet ports support speeds of up to 100 Mbps.
No image available
A mesh kit with two points; the specified ethernet backhaul may be useful if you have cabling available.
Wi-Fi 6. Ethernet backhaul between mesh units is listed as an option.
No image available
A kit with three mesh units; TP-Link lists optional ethernet backhaul for the Deco X50.
Wi-Fi 6. Three ethernet ports are listed per unit.
No image available
A kit with two mesh units for anyone considering wired installation and with suitable PoE power available.
Wi-Fi 6. Two ethernet ports and PoE support are listed per unit.
No image available
A kit with three mesh units for anyone looking to use several Wi-Fi points.
Wi-Fi 5. Three ethernet ports are listed per unit.
Not before you’ve tested it. Check your existing connection using a network cable; if it’s already too slow, adding another mesh point won’t solve the problem. Then test the Wi-Fi in your teaching space.
For Deco, TP-Link says you can use the app to check whether ethernet backhaul is active for each satellite. For other systems, follow the manufacturer’s installation instructions.
No. According to TP-Link, the PX50’s G.hn powerline backhaul won’t connect with the PX10, P7 or P9.
In the Netherlands, statutory warranty applies if a product breaks down sooner than you could reasonably expect under normal use. The seller is then responsible for providing an appropriate solution; a manufacturer’s warranty doesn’t replace this legal right.
According to the Dutch Authority for Digital Infrastructure, radio equipment must meet the applicable European requirements and carry the correct CE marking. Check the specific model; a statement on a product page isn’t, by itself, an independent conformity test.