Who is this choice relevant to?

Watching from behind thick walls

If your viewing area is behind walls that may interfere with the radio signal, compare a wired route with wireless or powerline backhaul. Consumentenbond and TP-Link Netherlands cover these connectivity considerations for Wi-Fi extenders and mesh systems.

Watching with an Ethernet cable available

If you can connect a node near your TV by cable, check that the mesh nodes support Ethernet backhaul and that you’ll have enough ports left over. TP-Link Netherlands describes Ethernet backhaul for products including the Deco X50 and X50-PoE.

Watching without a cable route

If running cables isn’t an option, check the wireless connection between nodes and think carefully about where to place them. Consumentenbond recommends placing extenders where you want to improve the signal; ASUS Netherlands describes a separately configurable backhaul band for the ZenWiFi AX (XT8).

What should you look for when buying?

Ethernet backhaul

Choose this option if: you can run an Ethernet cable to a mesh node near your viewing area. The connection between nodes then won’t need to pass wirelessly through the thick wall.

Trade-off: running a cable takes work and won’t fix a slow internet connection. Check the system’s ports and connection instructions.

Wireless backhaul

Choose this option if: you don’t want to run a cable and can place a node where it still gets a usable connection from the previous node. ASUS Netherlands describes a separately configurable band for the connection between nodes on the ZenWiFi AX (XT8).

Trade-off: an extra band won’t eliminate the effect of thick walls on the radio signal; check the connection at the locations you have in mind.

Powerline backhaul

Choose this option if: running a cable is impractical and you want to connect suitable mesh nodes through your home’s electrical wiring. According to TP-Link, the Deco PX50’s powerline backhaul only works with compatible PX50 nodes on the same electrical circuit.

Trade-off: performance depends on the equipment and electrical installation, and isn’t guaranteed in every home. TP-Link states that the PX50 does not provide powerline backhaul with the PX10, P7 or P9.

Concern What to look for when buying Who is this important to?
Connection through thick walls Check the supported backhaul, compatibility between nodes and whether the connection works properly in your home. If I watch from behind thick walls, I mainly want the mesh nodes to reach each other reliably. Around 36% of consumers make a connection through or around walls their top priority.
Wired route to the viewing area Count the Ethernet ports you’ll need and follow the connection instructions for the system you choose. If I can run a cable, I want to connect the nodes by wire and know whether there’ll still be a port free for my playback device. Around 29% of consumers prioritise this kind of wired reliability.
Installation without cables Check the connection quality at the locations you have in mind and test it in your viewing area. If I can’t run an Ethernet cable, I want to be able to position the nodes so they stay connected wirelessly. Around 21% of consumers make cable-free installation their top priority.
Cost and management Compare the number of nodes you need, the ports, software support and any recurring costs. If I mainly need the system for watching video, I don’t want to manage features or equipment I don’t need. Around 14% of consumers prioritise reasonable costs and simple management.

Measure the internet speed on your playback device and compare it with the requirements of the service you use to watch the theatre recording. A mesh system’s Wi-Fi standard or theoretical speed won’t tell you on its own what speed you’ll get in that location.

Common buying mistakes

  • Treating the coverage in square metres as a guarantee for your home

    Your connection also depends on where you place the nodes and the route to your viewing area. Consumentenbond describes differences in the range of mesh systems.

    Assess the whole route to your viewing area and check the connection between nodes, not just the signal next to the TV.

  • Assuming all Deco nodes support the same powerline connection

    According to TP-Link, the Deco PX50 does not provide powerline backhaul with the PX10, P7 or P9.

    Before expanding your system, check the full model names and the nodes’ powerline compatibility.

  • Confusing theoretical Wi-Fi speed with playback speed

    The actual connection on your playback device and the streaming service’s requirements determine what you get in that location; a Wi-Fi specification alone is no proof of smooth playback.

    Measure the speed where you watch and compare the result with the requirements of the service you use.

Brands to compare

TP-Link

The Deco range includes several mesh options, with Ethernet, wireless and powerline connectivity among the features available.

  • TP-Link describes optional Ethernet backhaul for the Deco X50 and a PoE version of the X50-PoE.
  • According to TP-Link, the PX50 powerline backhaul only works with suitable PX50 nodes on the same electrical circuit; the manufacturer’s coverage claims aren’t a measurement of performance in your home.

ASUS

The ZenWiFi AX (XT8) is a tri-band mesh system with configurable wireless backhaul and Ethernet backhaul support.

  • ASUS describes a separately configurable band for the connection between mesh nodes.
  • This feature doesn’t guarantee that the wireless signal will be strong enough through the thick walls in your home.

FRITZ!

The FRITZ!Repeater 3000 AX is worth considering if you’re extending an existing FRITZ!Box system. It can connect to the router over Wi-Fi or LAN.

  • The Dutch manufacturer’s product page lists two gigabit LAN ports.
  • The automatic transfer of Wi-Fi settings described applies when used with a FRITZ!Box; don’t assume it will work with a router from another brand.

Mesh products on Joybuy

These Joybuy options are mesh systems for the home. Compare their stated connectivity options with the cabling available and the conditions in your viewing area. For the specific model, also check the CE marking and relevant conformity documentation.

TP-Link Deco BE68 mesh system, 2-pack

TP-Link Deco BE68 (2-pack)

Suitable for a setup where you want the option of using wired or wireless connections between mesh nodes.

The product description lists Wi-Fi 7, two mesh nodes, multi-gigabit WAN/LAN ports and simultaneous use of wired and wireless backhaul.

View at Joybuy
ASUS ZenWiFi BT8 tri-band mesh system, 2-pack

ASUS ZenWiFi BT8 Tri-Band Wi-Fi 7 (2-pack)

An option to consider if you’re looking for a two-unit ZenWiFi mesh system and want to compare a tri-band model.

The product title lists tri-band Wi-Fi 7 with 2.4, 5 and 6GHz bands. The product description mentions AiMesh integration with compatible ASUS routers.

View at Joybuy
ASUS ZenWiFi BD4 dual-band mesh system, 2-pack

ASUS ZenWiFi BD4 Dual-Band Wi-Fi 7 (2-pack)

Suitable for a setup where you want to include wired backhaul as an option in your comparison.

The product title lists dual-band Wi-Fi 7; the product description mentions wired backhaul and setup through the ASUS Router app.

View at Joybuy
TP-Link Deco X20 AX1800 Wi-Fi 6 mesh system, 2-pack

TP-Link Deco X20 AX1800 Wi-Fi 6 (2-pack)

An option to compare if you’re considering a mesh system with two nodes and Ethernet backhaul.

The product description lists Wi-Fi 6, Deco X20 nodes and wired Ethernet backhaul.

View at Joybuy
Linksys Velop Pro 7 tri-band mesh system, 2-pack

Linksys Velop Pro 7 Tri-Band Wi-Fi 7 (2-pack)

An option to consider if you want to compare a two-node tri-band mesh system for coverage across multiple rooms.

The product title lists Wi-Fi 7 with 2.4, 5 and 6GHz bands. The product description mentions expansion with Velop Pro 7 or compatible Linksys Cognitive Mesh nodes.

View at Joybuy

Frequently asked questions

How can I check whether my connection is suitable for streaming the theatre recording?

Measure the speed on your playback device and check the requirements of the service you use to watch the recording. Netflix recommends a stable connection of at least 5 Mbps for 1080p and 15 Mbps for 4K for its own streams; these figures don’t automatically apply to your theatre service.

Can I put a mesh node directly behind the thick wall?

Only do this after checking its connection to the previous node, as placement affects coverage. If the wireless connection isn’t strong enough, look into Ethernet or, with suitable equipment and electrical wiring, powerline.

What running costs and service terms should I check?

Mesh nodes use electricity while switched on. Also check software support, the seller’s warranty terms and whether extra security features require a subscription.

Do I need a licence or registration to use Wi-Fi at home in the Netherlands?

According to the Netherlands’ Radiocommunications Agency, home use of Wi-Fi on the designated frequencies is licence-free if you meet the conditions of use; licence-exempt use of frequencies does not require notification or registration. Also check whether the relevant European product requirements and CE marking apply to the specific model.