Viewers with weak coverage
You watch in a room where your current router’s Wi-Fi signal is weak, and want to know whether extra, well-placed access points could help. Consumentenbond highlights the importance of placement and obstacles.
Mesh Wi-Fi can help if coverage is weak where you watch, but it won’t fix problems with your internet connection or the recording source itself. When comparing older and newer devices, check which Wi-Fi generations they support, where you can place the mesh units, and whether you can use Ethernet backhaul or connect your TV or streaming device by cable. The speed Netflix recommends for 4K streaming applies to Netflix; it isn’t a general requirement for theatre recordings.
You watch in a room where your current router’s Wi-Fi signal is weak, and want to know whether extra, well-placed access points could help. Consumentenbond highlights the importance of placement and obstacles.
You use phones, laptops or other devices with different Wi-Fi generations while watching, and want to keep them on the same home network. Consumentenbond and ASUS explain why compatibility matters.
You can connect mesh units to each other or wire your playback device, and want to weigh this up against a fully wireless setup. TP-Link and ASUS list Ethernet backhaul as an option on compatible systems.
Start by identifying the weak point where you watch. Then check whether you can place an extra unit in a suitable spot and whether cables are available. Choose the number of units to suit your home’s layout and connection needs, rather than relying solely on the stated maximum coverage.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Coverage where you watch | Look at possible locations for an extra unit, and consider obstacles and the distance from the previous unit. | If the Wi-Fi signal is weak in your viewing room, you’ll need to place a unit somewhere it can still get a good connection. Around 36% of consumers give coverage the highest priority. |
| Older and newer devices | Check which Wi-Fi generations are supported by the system, your TV, streaming device and other devices. | If several devices are connected at the same time, you’ll want to use them on the same network. Around 29% of consumers prioritise this compatibility. |
| Available cabling | Check whether there’s a suitable cable route and what Ethernet options the version you’re considering offers. | If you have cables between rooms or floors, you’ll want to weigh up wiring the mesh units or your playback device. Around 21% of consumers give cabling the highest priority. |
| Cost and management | Check how many units are included and whether any features or services you want may cost extra. | If you’re comparing a set and its associated services, you’ll want a clear picture of the total cost. Around 14% of consumers look at this first. |
A product specification doesn’t tell you what speed you’ll get in a particular part of your home. The connection between mesh units and the playback source also matters.
First, check the connection where you watch. Then compare placement and backhaul options, as well as the Wi-Fi generation.
The extra unit also needs a usable connection to the rest of the network. Too many obstacles between units can affect the connection.
Consumentenbond recommends keeping obstacles between Wi-Fi units to a minimum. Try a spot where the previous unit is still within good range, and consider Ethernet backhaul if there’s a suitable cable route.
TP-Link describes the Deco X50 as a Wi-Fi 6 mesh system, available in a range of pack sizes.
ASUS describes the ZenWiFi XD5 as a Wi-Fi 6 system that supports earlier Wi-Fi generations and Ethernet backhaul.
FRITZ! offers both extensions for an existing network and complete mesh sets.
NETGEAR gives the Orbi RBK763S as an example of a tri-band Wi-Fi 6 set with one router and two satellites.
These product picks are for anyone comparing mesh Wi-Fi systems with multiple units, with a focus on mixed Wi-Fi generations and wired connection options.
No image available
Worth comparing if you want multiple mesh units and are considering wired connections.
Wi-Fi 6; dual-band at 2.4 GHz and 5 GHz; three Deco X50 units.
TP-Link lists optional Ethernet backhaul and three gigabit ports per unit.
No image available
This set is worth considering if you want to compare two mesh units and factor in PoE.
Wi-Fi 6; dual-band at 2.4 GHz and 5 GHz; two Deco X50-PoE units.
No image available
Worth comparing if you’re looking for a tri-band mesh set with Wi-Fi 6E.
Wi-Fi 6E; tri-band at 2.4 GHz, 5 GHz and 6 GHz; three units.
No image available
A good option to compare if you’re looking at tri-band mesh Wi-Fi and Wi-Fi 6E support.
Tri-band at 2.4 GHz, 5 GHz and 6 GHz; Wi-Fi 6E.
According to the product description, for indoor use only.
No image available
Worth comparing if you want three mesh units and want to factor PoE into your choice.
Wi-Fi 6; dual-band at 2.4 GHz and 5 GHz; three Deco X50-PoE units.
No. Mesh Wi-Fi mainly helps with your connection and coverage at home. Also check the connection on your playback device and the recording source. Netflix recommends a stable connection of at least 15 Mbps for its own 4K streaming. This isn’t automatically a requirement for another recording or service.
Don’t place the unit somewhere the existing signal has almost disappeared. Consumentenbond recommends keeping obstacles between units to a minimum. A spot halfway between can help improve weak coverage further away in your home.
Older devices can connect to compatible mesh systems, but they won’t automatically get the specific improvements offered by Wi-Fi 6. ASUS notes this for the ZenWiFi XD5. Also check the requirements for your own TV, streaming device and other devices.
The Dutch Authority for Digital Infrastructure refers to European requirements for radio equipment and mandatory CE marking. According to the Authority, stricter requirements have applied since 1 August 2025 to almost all wireless devices placed on the European market from that date. CE marking is not an assessment of Wi-Fi coverage or performance in your home.