Who is mesh Wi-Fi suitable for?

People with a weak Wi-Fi signal upstairs

You mainly want a reliable connection on another floor or at the far end of your home. The position of the mesh points and any obstacles between them can make a difference.

Households with several people online at once

You share the connection between activities such as video calls, streaming and other devices. So look beyond coverage and consider the connection between the mesh points too.

Households with older and smart devices

You want to keep using your existing devices alongside newer Wi-Fi equipment. Check compatibility and whether features such as a separate IoT network are available on the exact model.

What should you look for?

First, work out where your connection falls short and how the points can connect to each other. Then choose features and equipment that suit your household.

What to consider What should you check? Who is this important for?
Coverage across multiple floors Map out areas with a weak signal and consider where each point can go with as few obstacles as possible. If I need Wi-Fi upstairs or at the back of the house, I want to know where the points will maintain a good connection with each other. Around 33% of consumers rank coverage as their top purchase priority.
Simultaneous use and backhaul Check whether Ethernet backhaul is possible and which ports the exact model has. When several people are on video calls, streaming and using other devices at the same time, I pay attention to the connection between the points. Around 27% of consumers rank simultaneous use as their top priority.
Device compatibility Check the Wi-Fi support of your key devices and whether the guest or IoT network feature you want is available. If I want to keep using older and smart devices alongside newer equipment, I want to know which connections and settings I need. Around 20% of consumers put compatibility first.
Installation and expansion Check how the system connects to your modem, how many points you need and whether you can add to your existing mesh equipment. I want a set-up that works with my current router and covers all the areas where I need Wi-Fi. Around 20% of consumers rank installation and expansion as their top purchase priority.

Common pitfalls

  • Assuming a stated coverage area is guaranteed in your home

    Walls, floors and the position of the points all affect the connection. So a manufacturer’s coverage claim won’t necessarily reflect the signal in every room of your terraced house.

    First, identify where the signal is weak and where the points can go. Only compare coverage figures for models with the same number of points.

  • Choosing Wi-Fi 7 just because it has a higher number

    The Wi-Fi version alone doesn’t determine performance. Older devices also won’t automatically benefit from a newer Wi-Fi standard. The Consumers’ Association points out that Wi-Fi 7 may offer little extra over Wi-Fi 6 for the average user.

    Check which Wi-Fi versions your devices support, and compare backhaul, placement and relevant test results too.

  • Mistaking a repeater for a complete mesh system

    An add-on for an existing network isn’t automatically the same as a complete system with several points. Some features may also depend on the router you already use.

    Check what’s included in the box and which features work with your current router. FRITZ!, for example, says that automatic transfer of Wi-Fi settings is available when used with a FRITZ!Box.

Brands to compare

TP-Link

The Deco range includes dual-band Wi-Fi 6 systems and tri-band Wi-Fi 6E systems. The right model for you depends, among other things, on where you’ll place it and which connections you need.

  • TP-Link Netherlands lists three gigabit ports and optional Ethernet backhaul for the Deco X50.
  • Stated coverage and combined radio speed are manufacturer claims for the particular model and system size, not measurements in a terraced house.

ASUS

The ZenWiFi BD4 is a dual-band Wi-Fi 7 router worth comparing if you’re looking for AiMesh expansion, IoT settings or fast Ethernet ports.

  • ASUS lists two 2.5G Ethernet ports and an IoT network for the BD4.
  • Check the pack size: the stated coverage area applies to a 3-pack. Wi-Fi 7 alone doesn’t guarantee better coverage.

FRITZ!

The FRITZ!Repeater 3000 AX is an option for expanding an existing compatible FRITZ! network.

  • FRITZ! lists three radio bands, two gigabit LAN ports and the option to connect the device to a FRITZ!Box via LAN.
  • The manufacturer describes automatic transfer of Wi-Fi settings for use with a FRITZ!Box. This is not the same as confirmed FRITZ! mesh integration with every other router.

Linksys

The Velop Pro 7 is a Wi-Fi 7 mesh router. Be sure to check the pack size when comparing it with other systems.

  • The Consumers’ Association lists features including a guest network, Ethernet ports and parental controls for the Velop Pro 7 2-pack.
  • The test result cited by the Consumers’ Association is based on a 3-pack and is not a separately measured result for the 2-pack.

Joybuy products

This selection includes TP-Link Deco mesh systems with Wi-Fi 5, Wi-Fi 6 or Wi-Fi 7, in versions with two or three points. Compare the number of points, Wi-Fi standard and stated connections with your home and devices. For the exact model, also check that it carries the required CE marking.

TP-Link Deco BE68 Wi-Fi 7 mesh system, 2-pack

TP-Link Deco BE68 (2-pack)

A mesh system with two points for connecting several areas of your home. Check that the stated connections and backhaul options suit your set-up.

Wi-Fi 7 and tri-band. The product description lists support for 200+ devices, plus wired and wireless backhaul.

View at Joybuy
TP-Link Deco E4 Wi-Fi 5 mesh system, 3-pack

TP-Link Deco E4 (3-pack)

A set with three mesh points for Wi-Fi in several areas. Before you buy, check where the points can go and how they’ll connect to your router.

Dual-band Wi-Fi 5 on 2.4 GHz and 5 GHz. The product description lists two Ethernet ports per unit.

View at Joybuy
TP-Link AX1800 Wi-Fi 6 mesh system, 2-pack

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System (2-pack)

A Wi-Fi 6 mesh system with two points. Check that they’ll work well in the areas where you need a connection.

The product information lists two Ethernet ports per unit and Ethernet backhaul.

View at Joybuy
TP-Link Deco M4 Wi-Fi 5 mesh system, 3-pack

TP-Link Deco M4 (3-pack)

A mesh system with three units for Wi-Fi in several areas. Check that the number of points suits your home and router.

Dual-band Wi-Fi 5 on 2.4 GHz and 5 GHz. The product description lists roaming between Deco units, parental controls and a guest network.

View at Joybuy
TP-Link Deco X50 Wi-Fi 6 mesh system, 3-pack

TP-Link Deco X50 (3-pack)

A Wi-Fi 6 mesh system with three points for use in several rooms. Consider whether you want to connect the points by cable.

Dual-band Wi-Fi 6. TP-Link Netherlands lists three gigabit ports per unit and optional Ethernet backhaul for the Deco X50.

View at Joybuy

Frequently asked questions

Where should you put an extra mesh point?

Don’t put a mesh point only where the existing signal has almost disappeared. The Consumers’ Association recommends keeping obstacles between the points to a minimum and suggests placing a point in the middle of the house if the signal is weak at the back. Then check the connection at the intended location.

Will your older devices still work with Wi-Fi 6?

Yes. According to the Consumers’ Association, older Wi-Fi devices can still connect, but they won’t automatically get the improvements offered by Wi-Fi 6. If necessary, check which settings your specific devices need.

Can you use a mesh point with your existing router?

It depends on how you want the devices to work together and which features you want to use. FRITZ! says the Repeater 3000 AX can also work with other routers and can connect to a FRITZ!Box via LAN. The automatic transfer of settings described by the manufacturer applies to use with a FRITZ!Box.

Do you need a licence for home Wi-Fi in the Netherlands?

According to the RDI, you don’t need a licence for home Wi-Fi if you use the designated frequencies and comply with the conditions of use. Radio equipment must meet European requirements, so check that the exact model you buy carries the correct CE marking.