Start with the rooms where the signal is weak, then work out how many mesh nodes you need. The Consumentenbond recommends two nodes as a starting point for many homes, but that’s no guarantee that every terraced house will need the same number. If you’re short on shelf space, a plug-in model may appeal, but an available socket isn’t automatically a good spot for the signal. If you have a suitable network cable, it’s also worth comparing systems that connect the nodes by cable.
Who is mesh Wi-Fi suitable for?
Someone with a weak Wi-Fi signal upstairs
Wants to share the connection between the living floor, bedrooms and possibly the loft. The Consumentenbond recommends positioning nodes with the rooms with weak coverage and the connection between mesh nodes in mind.
Someone short on shelf space
Has suitable sockets but little room for freestanding nodes. Compare the design as well as whether the node will still have a usable connection in the intended location.
Someone with a cable running upstairs
Can make use of existing cabling and wants to check whether the chosen system supports Ethernet backhaul and has enough ports. The Consumentenbond highlights connections and the system’s capabilities as points to consider when choosing.
What should you look for?
First, identify where the connection falls short. Then check what locations are available, and decide whether you want to connect the nodes wirelessly or with a network cable.
| What to consider |
What should you check? |
Who is this most relevant to? |
| Coverage between floors |
Identify rooms with weak coverage; place wireless nodes where they can still connect reliably to the network. |
If I mainly want to reach the bedrooms or loft, I’ll prioritise coverage in those areas. Around 36% of consumers put coverage between floors at the top of their list. |
| Space for the mesh nodes |
Compare the units’ dimensions and power requirements with the available sockets and intended locations. |
If shelf space is limited, I’ll look for a node that fits in a suitable spot without overlooking the signal connection. Around 29% of consumers give available space the highest priority. |
| Connection between nodes |
Check whether the exact system supports Ethernet backhaul and how many ports each unit has. |
If there’s a suitable network cable running to another floor, I’ll want to use it rather than rely solely on a wireless connection. Around 21% of consumers prioritise a wired connection between nodes. |
| Modem and network management |
Check compatibility with your exact modem and whether the system offers the network and guest features you want. |
If I want to keep using my existing modem and network setup, I’ll first check which mesh nodes are compatible. For around 14% of consumers, compatibility with their modem and network management setup is the top priority. |
Avoiding common buying mistakes
-
Placing an extra node where the signal is already weak
A wireless mesh node still needs a usable connection to the previous node. Otherwise, the chosen location won’t solve the problem.
Try a spot in between. If you can’t get a good wireless connection there, check whether Ethernet backhaul is an option.
-
Mistaking a small satellite for a complete system
In the Linksys Velop Micro 6 versions reviewed, the LN1200 satellite has a different role from the LN1100 main router. Linksys says the LN1200 only works as a secondary node with a compatible Velop Mesh main router or node.
Check exactly what’s included in the box and whether a compatible main router is supplied.
-
Assuming that provider nodes work with every modem
Ziggo says its hexagonal pods only work with certain white Ziggo modems.
Before you buy, check the exact modem and pod model. According to Ziggo, the Deco M4 version described is an alternative that can work with any modem.
-
Assuming the advertised top speed means you’ll get coverage in the loft
How well the connection works on a particular floor also depends on where the mesh nodes are placed and how they’re connected to each other.
Compare the capabilities of the exact system with your intended setup; don’t take an advertised speed as a guarantee of performance in your home.
Brands to compare
TP-Link
The Deco X50 is a freestanding mesh system worth comparing if you can place the units in strategic locations. According to the TP-Link datasheet, the version reviewed uses Wi-Fi 6 and each unit has three gigabit ports.
- The ports make it worth comparing for a wired setup.
- Advertised performance and coverage haven’t been measured in your terraced house. Check the dimensions and the number of units in the exact package.
FRITZ!
The FRITZ!Mesh Set 1700 is worth comparing if you want to plug your mesh nodes into sockets. The 3-pack reviewed contains three FRITZ!Repeaters 1700.
- The manufacturer describes this system as suitable for larger homes.
- You won’t necessarily need three nodes in a terraced house. Check the socket locations, how it connects to your router and which version you’re buying.
ASUS
The ZenWiFi BD4 is a freestanding dual-band Wi-Fi 7 option. ASUS lists two 2.5-gigabit ports per unit.
- The ports make it worth comparing for a possible wired connection between nodes.
- This specification doesn’t prove that your existing internet connection will be faster. Check how many units are included and how much space you’ll need to place them.
Linksys
The Velop Micro 6 is worth considering when space is a factor, as the LN1100 main router and LN1200 satellites have different dimensions and connections.
- The different types of unit give you specific designs to compare.
- According to Linksys, the LN1200 only works as a secondary node with a compatible Velop Mesh main router or node. A standalone satellite can’t replace the main unit.
Ziggo
Ziggo describes its SmartWifi nodes as a provider option for households with a compatible Ziggo modem, and also lists a Deco M4 system.
- The provider describes both its own nodes and a Deco version.
- According to Ziggo, the hexagonal pods only work with certain white Ziggo modems; the Deco M4 version described works with any modem, according to the provider. This applies to those versions, not all mesh products.
Mesh Wi-Fi products on Joybuy
This Joybuy selection includes mesh systems with two units, as well as models whose product details mention wired backhaul or power over Ethernet. For each version, check that the design and connections suit the available locations and your existing network.
No image available
TP-Link Deco BE68 (2-pack)
Worth comparing if you want to look at using two mesh nodes and a wired connection between them; the product description mentions both wired and wireless backhaul.
The system includes two units with a single network name. The description lists 10-, 2.5- and 1-gigabit WAN/LAN ports on each unit.
View on Joybuy
No image available
ASUS ZenWiFi BT8 (2-pack), tri-band
Worth comparing if you’re considering two mesh units and a guest network; the product information lists both features.
The system is tri-band (2.4/5/6 GHz) and has 1- and 2.5-gigabit Ethernet ports. The product information mentions AiMesh integration with compatible ASUS routers. The units should be placed on a stable, flat surface with good ventilation.
View on Joybuy
No image available
ASUS ZenWiFi BD4 dual-band (2-pack)
Worth comparing if you have a cable route available; the product description mentions an option for wired backhaul.
The specifications list Wi-Fi 7, two 2.5-gigabit Ethernet ports and a guest network.
View on Joybuy
No image available
TP-Link AX1800 mesh Wi-Fi 6 system (2-pack)
Worth comparing if you want to use two mesh nodes and need Ethernet backhaul; the product information says it’s supported.
The system uses Wi-Fi 6 and has two Ethernet ports per unit.
View on Joybuy
No image available
TP-Link Deco X50-PoE dual-band (2-pack)
Worth comparing if you can use Ethernet to power the units in the intended locations; the product description lists PoE support.
The system uses Wi-Fi 6 and has two Ethernet ports per unit.
View on Joybuy
Frequently asked questions
Should I start with two or three mesh nodes?
Use rooms and floors with weak coverage as your starting point. The Consumentenbond recommends starting with two nodes in many homes and adding more later if needed. That doesn’t automatically tell you how many nodes your terraced house will need.
Can I put the second node in the room where the Wi-Fi already drops out?
Not necessarily with a wireless connection: place the node where the previous signal is still strong, then test coverage in the problem room. A suitable cable connection can also give you other placement options to explore.
What should I maintain if several people use the Wi-Fi?
Keep your router and mesh nodes up to date, use a strong password and consider setting up a guest network for visitors. Check which features the exact system offers.
What should I look for when it comes to power use and support?
Mesh nodes use power while switched on, so compare the stated or measured consumption of the versions you’re considering. Also check the terms for updates and support, as well as any provider rental charges or paid features for the version you choose.
Which Dutch or European product regulations are relevant?
Mesh Wi-Fi radio equipment sold in the Netherlands must meet the applicable European requirements for radio equipment and carry the correct CE marking. The Dutch Authority for Digital Infrastructure (Rijksinspectie Digitale Infrastructuur) says that wireless devices placed on the European market from 1 August 2025 must also meet stricter cybersecurity requirements. A CE marking is not a separate assessment of Wi-Fi coverage.