Who is mesh Wi-Fi suitable for?

Studying together in different areas

You share the evening connection and want reliable Wi-Fi at several desks. First, check where the signal drops out and how well the nodes can reach one another. The Consumers' Association recommends keeping obstacles between wirelessly connected Wi-Fi nodes to a minimum.

A small room with limited shelf space

You’re looking for a spot that takes up little space without getting in the way of a usable connection. Check the dimensions and permitted mounting options for the exact model; a compact node shouldn’t be placed behind books or in a closed cupboard.

A household with existing network cables

If there are cables between the possible locations, check whether the system supports Ethernet backhaul and has enough ports. TP-Link and ASUS list Ethernet backhaul for specific Deco and ZenWiFi models.

What should you look for when choosing?

First, measure your internet speed using a network cable, then check Wi-Fi in the areas where you study. The Consumers' Association recommends connecting a computer using a network cable when measuring speed over a wired connection.

What to consider What should you check? Who is this for?
Coverage in study areas Where does Wi-Fi drop out? Can wirelessly connected nodes reach one another reliably, with as few obstacles as possible? I want to know where the connection drops out and whether the nodes can reach one another reliably. Around 33% of consumers are most concerned about getting coverage in every study area.
Studying at the same time Check your devices’ Wi-Fi support, the available Ethernet ports and whether wired backhaul is supported. If several people are studying or making video calls online at the same time, I want to know whether the connection will remain usable in our study areas. Around 25% of consumers prioritise shared evening use.
Shelf space and placement Measure the available open space, allowing for the plug and cables; check whether the manufacturer permits wall or ceiling mounting and what power supply is required. With limited shelf space, I want to keep an open, usable spot free for other things. Around 25% of consumers prioritise limited space for placement.
Ongoing costs and management Consider how many nodes will be switched on all the time, and check which management features are available and whether any conditions apply. I want to understand in advance what using and managing the chosen system will involve. Around 17% of consumers prioritise ongoing costs and management.

Common buying mistakes

  • Putting an extra node in a closed bookcase

    A spot that takes up hardly any room may be unsuitable if obstacles interfere with the connection between Wi-Fi nodes.

    Choose as open a location as possible and check whether the nodes can reach one another from there. Only consider wall mounting for models the manufacturer says can be mounted that way.

  • Assuming a stated AX speed is the internet speed at your desk

    A stated Wi-Fi speed isn’t a measure of your broadband connection or of the signal through walls.

    First, measure your broadband connection using a network cable, then check Wi-Fi in your study areas.

  • Confusing an extender with a router unit

    According to eero, the standalone eero 6+ Extender has no Ethernet ports, while the eero 6+ router has two gigabit ports.

    Check the exact package contents and ports before planning to connect a wired study device or use wired backhaul.

    If you need Ethernet ports, you may need a different unit or cabling setup.

  • Overlooking ongoing use

    Mesh nodes stay on all the time, so their energy consumption may be a factor when deciding how many units you need. The Consumers' Association points out that the electricity used by Wi-Fi equipment can add up over time.

    Compare how many nodes you actually need and check which management features are available with the model you choose.

Brands to consider

TP-Link

Deco X50 for a wireless or wired connection between nodes; Deco X50-PoE if wall or ceiling placement is important.

  • TP-Link lists three gigabit ports on each Deco X50 unit and support for Ethernet backhaul.
  • For the Deco X50-PoE, TP-Link lists PoE or DC power and table, wall or ceiling placement.
  • For PoE, check that the model is compatible with the required wired power supply and mounting accessories. A claimed coverage range isn’t a measurement of performance in your home.

ASUS

ZenWiFi XD5 for anyone looking for app-based management and, if cables are already in place, the option to use Ethernet backhaul.

  • ASUS lists Ethernet backhaul and setup via the ASUS Router app.
  • The manufacturer says Wi-Fi 6 requires compatible devices and that 160 MHz on 5 GHz may be restricted in some regions. Check the exact model.

eero

The eero 6+ may be a good fit if you have a flat surface for a router unit.

  • eero lists dimensions of 99,4 × 97 × 65,8 mm and two gigabit ports for the eero 6+ router.
  • According to eero, the standalone eero 6+ Extender has no Ethernet ports, so check which unit is included in the package.

FRITZ!

FRITZ!Repeater 1200 AX for anyone looking to extend an existing network without putting a unit on a table.

  • FRITZ! lists one gigabit LAN port and mesh compatibility with a FRITZ!Box.
  • According to the manufacturer, it can be used with other routers, but don’t assume you’ll get the same mesh features outside a FRITZ! network.

Joybuy products for Wi-Fi in multiple areas

These Joybuy products are mesh systems for using Wi-Fi in multiple areas of your home, with options for Ethernet backhaul and, for the Deco X50-PoE, wall or ceiling placement.

TP-Link Deco BE68 2-pack

TP-Link Deco BE68 (2-pack)

A two-node system to consider if you want Wi-Fi in more than one study area.

View at Joybuy
TP-Link Deco X50 3-pack, Dual-Band Wi-Fi 6

TP-Link Deco X50 (3-pack), Dual-Band Wi-Fi 6 (802.11ax)

An option to consider if there are cables between your study areas; TP-Link lists Ethernet backhaul for the Deco X50.

The product name lists Dual-Band (2.4 GHz/5 GHz) and Wi-Fi 6 (802.11ax).

View at Joybuy
TP-Link Deco X50-PoE 2-pack, Dual-Band Wi-Fi 6

TP-Link Deco X50-PoE (2-pack), Dual-Band Wi-Fi 6 (802.11ax)

Worth considering if you want to free up shelf space; TP-Link lists wall and ceiling mounting for the Deco X50-PoE.

TP-Link lists PoE or DC power. PoE requires a compatible wired power supply; check which accessories you’ll need, too.

View at Joybuy
TP-Link Deco XE75 Pro 3-pack, Tri-Band Wi-Fi 6E

TP-Link Deco XE75 Pro (3-pack), Tri-Band Wi-Fi 6E (802.11ax)

A mesh system to compare if you want to extend Wi-Fi across several study areas.

The product name lists Tri-Band (2.4 GHz/5 GHz/6 GHz) and Wi-Fi 6E (802.11ax).

View at Joybuy
TP-Link Deco XE75, Tri-Band Wi-Fi 6E

TP-Link Deco XE75, Tri-Band Wi-Fi 6E (802.11ax)

A model to include in your comparison of mesh Wi-Fi for several study areas.

The product name lists Tri-Band (2.4 GHz/5 GHz/6 GHz) and Wi-Fi 6E (802.11ax). Check the package contents and number of nodes before you choose.

View at Joybuy

Frequently asked questions

Should I upgrade to a faster broadband package first?

Not necessarily. First, measure the connection using a computer connected with a network cable and compare the result with the speed you were promised. Then check where Wi-Fi falls short; a mesh system won’t change the speed of the broadband connection itself.

Where should I put an extra node if the shelf is full?

Choose as open a spot as possible where the nodes can reach one another reliably. The Consumers' Association recommends keeping obstacles to a minimum and, for wirelessly connected nodes, preferably having no more than two rooms between them. Only use wall or ceiling mounting for models the manufacturer says can be mounted that way.

Does every mesh node have an Ethernet port?

No. eero lists two gigabit ports for the eero 6+ router, but no Ethernet ports for the standalone eero 6+ Extender. So check the ports and contents of the exact model.

What product requirements apply to Wi-Fi equipment in the Netherlands?

The RDI states that radio equipment sold in Europe must carry the correct CE marking. Additional RED 3.3 cybersecurity requirements have applied since 1 August 2025. Check the documentation for the specific model; a product listing alone doesn’t confirm that the item supplied carries the marking.

Is the statutory guarantee for a mesh system always two years?

No. ACM ConsuWijzer distinguishes the statutory guarantee from a seller’s or manufacturer’s guarantee with a specified term. With normal use, the product must meet what you could reasonably expect from it; if it doesn’t, contact the seller.