Families with a study space outside the router’s range
The key question is whether the workspace itself gets a usable signal. The number and placement of Wi-Fi points will depend on your home.
Start with the places where family members work or study. Work out whether the main issue is poor coverage or several devices being used at once. Then choose locations where the mesh points can be placed; if you have network cables, ethernet backhaul may be an option. If you want to keep your existing router, check in advance which features are available in the chosen operating mode. Advertised coverage and Wi-Fi speeds won’t tell you exactly what to expect in your home.
The key question is whether the workspace itself gets a usable signal. The number and placement of Wi-Fi points will depend on your home.
When several devices are in use at once, advertised top speeds aren’t the only thing that matters. The connection also needs to work well in the places where everyone is working.
The operating mode you choose determines which router manages the network and where family features are available.
First, work out where you need Wi-Fi and how the points can connect to each other and to your existing router.
Suitable when: there’s no usable network cable running to the study space and the points can be placed where they can reach each other reliably.
Bear in mind: the wireless connection between the points and their placement matter. An advertised coverage area alone won’t tell you whether the workspace will get a signal.
Suitable when: there’s a usable network cable between the planned locations and your chosen model supports ethernet backhaul.
Bear in mind: you’ll need cables and compatible ports. This setup alone doesn’t guarantee a particular speed in the study space.
Suitable when: you want your provider’s router to keep managing the network and your mesh system has a suitable access point mode.
Bear in mind: in Deco’s access point mode, the main router manages the clients. TP-Link says some advanced Deco features, including parental controls, aren’t available in this mode.
| What to consider | What to look for | Who is this important for? |
|---|---|---|
| Coverage in the study space | Work out where the points can go, then check the connection at the workspace after installation. | If the study space is outside the router’s range, I want a usable connection there in particular. Around 36% of consumers say coverage in their workspace is their top priority. |
| Several users at once | Compare Wi-Fi support with your devices and assess the network during the kind of use you expect at home. | When family members are studying or making video calls online at the same time, I want to know whether the connection will remain usable in their workspaces. Around 29% of consumers give simultaneous use top priority. |
| Router and connections between points | Check that the cables, ports, ethernet backhaul and operating mode you want are suitable for your setup. | If I want to keep my existing router or have cables available, I want to know how they’ll work with the mesh points. Around 21% of consumers focus mainly on the connections to the router and between the points. |
| Family controls and setup | Check which features are available for each model and operating mode, how updates work, and that the equipment carries the CE marking. | Anyone who wants to use parental controls or other management features needs to know where they’re available and how the network is updated. Around 14% of consumers prioritise family controls and safe setup. |
Coverage depends on your home and where you place the points. A manufacturer’s coverage figure isn’t a measurement taken where your family works.
Map out possible locations for the points, then check the connection specifically in the study areas after installation.
If the connection isn’t good enough there, you may need an extra Wi-Fi point or cabling.
TP-Link lists different ethernet ports for these models and specifies PoE support for the X50-PoE.
Compare the full model name, number of points, ports and intended power supply method.
Your planned placement may depend on having a suitable PoE supply.
TP-Link says that some advanced Deco features, including parental controls, aren’t available in access point mode.
Decide in advance whether your existing router or the mesh system needs to provide the management features you want.
The Wi-Fi version alone doesn’t determine how the connection performs in your home. Wi-Fi 6 benefits require compatible devices, according to the Consumentenbond.
Compare support for your own devices and consider how the network performs in your workspaces, rather than looking only at the maximum figure on the box.
The Deco X50 is a Wi-Fi 6 mesh system with ethernet backhaul. The separate X50-PoE version is designed for setups where PoE and that model’s specific ports are relevant.
The ZenWiFi XD5 is a Wi-Fi 6 option that supports ethernet backhaul.
The FRITZ!Mesh Set 2700 is a separate Wi-Fi 7 option. According to FRITZ!, the three-piece set can be used alongside an existing router or connected directly to a compatible modem/ONT.
This selection at Joybuy includes mesh sets for a shared study space, with models from the Wi-Fi 6, Wi-Fi 6E and Wi-Fi 7 generations. The Dutch Authority for Digital Infrastructure says the required CE marking must be displayed on the equipment. Check the specific version being offered.
No image available
A two-point mesh set for anyone specifically looking for a Wi-Fi 7 version.
Wi-Fi 7; set of 2.
No image available
A three-point set for anyone who wants to use the Deco X50 with ethernet backhaul where suitable cables are available.
Wi-Fi 6; dual-band (2,4 GHz/5 GHz); three gigabit ports per point according to TP-Link.
No image available
An option to compare if you’re specifically looking for a tri-band mesh model with Wi-Fi 6E.
Wi-Fi 6E; tri-band (2,4 GHz/5 GHz/6 GHz).
No image available
A three-point set for anyone planning to use PoE power.
Wi-Fi 6; dual-band (2,4 GHz/5 GHz); PoE support and two ethernet ports per point.
No image available
A two-point set for anyone who wants to use the Deco X50 with ethernet backhaul where suitable cables are available.
Wi-Fi 6; dual-band (2,4 GHz/5 GHz); three gigabit ports per point according to TP-Link.
Not necessarily. TP-Link describes an access point mode for Deco that works alongside an existing router. In this mode, the main router manages the clients. Check in advance which Deco features, including parental controls, won’t be available as a result.
Choose locations where the points can reach each other, then check the connection in the study areas. VeiligInternetten recommends enabling automatic updates where possible. Otherwise, set a regular time to check for updates.
Ethernet backhaul requires suitable cables; a wireless connection between the points doesn’t. Check which cables and management features are included with the specific set, and what terms apply to any extra services.
According to the Dutch Government, you’re entitled to a product that works properly and can contact the seller if there’s a fault. The Netherlands has no fixed statutory guarantee period; a manufacturer’s warranty is separate from these statutory rights.
According to the Dutch Authority for Digital Infrastructure, the required CE marking must be displayed on the equipment. Check the marking on the specific version being offered; a model name or product page alone doesn’t confirm it.