Who is this choice relevant to?

Student with weak Wi-Fi behind the kitchen

Your study portal works by the router, but isn’t reliable in your study room. The Consumers’ Association recommends positioning Wi-Fi points so they can reach each other easily, with as few obstacles as possible in between.

Student who can run a cable

You can run a network cable to your study space or an intermediate point, and don’t want the connection between mesh points to depend on the signal getting through the kitchen.

User with a provider-supplied router

You want to keep your existing modem and are looking for an extension that works with it, such as a compatible solution from your provider or a mesh system with a suitable operating mode.

What should you look for in mesh Wi-Fi?

Start by testing the connection with a wired device by your router. Then choose between running a cable to a mesh point or placing a wireless point partway along the route, depending on the signal you can get there.

What to consider What to look for Who is this important for?
Coverage in your study space Test Wi-Fi in your study room and at possible intermediate positions; check how many points can get a usable connection. If I want to use my study portal at my desk, I need to know whether a point placed partway along the route can still maintain a good connection with the previous point. Around 36% of consumers prioritise coverage in their study space.
Connection between points Check for ethernet backhaul support and the ports you’ll need; also consider whether you can run a cable. NETGEAR explains that ethernet backhaul doesn’t use Wi-Fi bandwidth between points. If I can run a cable to or beyond the kitchen, I don’t want the connection between mesh points to depend on a wireless signal. Around 29% of consumers give this connection top priority.
Connecting to your router Check whether the mesh system has a suitable access point mode and which settings your provider recommends for the connection. If I want to keep using my provider’s router, I’m looking for an extension that suits my existing equipment and setup. Around 21% of consumers prioritise compatibility with their existing router.
Total cost Factor in the number of points you need, any provider rental charges, cables and the power consumption of devices that stay on all the time. If I want to solve the problem without unnecessary points or extra connection charges, I’ll first compare what my situation actually requires. Around 14% of consumers prioritise total cost.

Common buying mistakes

  • Buying a new mesh system without testing your connection first

    A slow connection from your provider and weak Wi-Fi between rooms call for different solutions.

    Before choosing equipment, compare a wired test by your router with the Wi-Fi signal in your study space.

  • Placing a wireless point where the Wi-Fi has already dropped out

    The point itself needs a usable connection to the previous point to extend the network further.

    Test a position partway along the route with as few obstacles as possible, or see if a suitable wired connection is an option.

  • Treating advertised speed or coverage as a guarantee

    The Wi-Fi standard and advertised figures alone won’t tell you whether the signal will reach your desk through the kitchen.

    Choose based on the cable route, placement and ports you need, not just a maximum speed figure.

Brands to compare

TP-Link

The Deco X50 is a Wi-Fi 6 mesh range available in different pack sizes, with an ethernet backhaul option.

  • TP-Link lists three gigabit ports per Deco X50 point and app-based setup.
  • The advertised speed and coverage alone won’t tell you whether the signal will reach a study room behind a kitchen.

ASUS

The ZenWiFi BD4 is a dual-band Wi-Fi 7 mesh range; the number of points in the pack is a separate choice.

  • ASUS describes an option for wired backhaul and two 2.5-gigabit ports per device.
  • Wi-Fi 7 won’t automatically strengthen a weak connection between mesh points through the kitchen. Check the operating modes of the exact model, too.

FRITZ!

FRITZ! offers mesh systems and repeaters to extend a home network, including the Set 1700 with three points.

  • FRITZ! describes central mesh management and the option to connect compatible points via LAN.
  • A three-point pack won’t necessarily be needed for one study room; first work out where points could get a usable signal.

KPN

SuperWifi is a provider solution worth comparing if you use KPN equipment and the MijnKPN app.

  • KPN lists help with positioning and the choice to rent or buy.
  • Check that the solution is compatible with your connection; this option won’t automatically suit equipment from another provider.

NETGEAR

NETGEAR documents ethernet backhaul for Nighthawk products; Orbi 970 is a separate mesh range.

  • According to NETGEAR, ethernet backhaul doesn’t use Wi-Fi bandwidth for the connection between points.
  • The Orbi 970 range is aimed at large homes and fast connections. Those features alone don’t make an extensive system necessary for one study space.

Mesh systems for your study space

These mesh systems are designed to extend a network between your router and study room; check the positioning options and connections for each system to see what suits your setup.

TP-Link Deco BE68 mesh system, 2-pack

TP-Link Deco BE68 (2-pack)

This two-point pack could suit you if you want to test several positions and can run a cable between the mesh points.

Tri-band Wi-Fi 7; wired backhaul; 10, 2.5 and 1 Gbps ports per point.

View at Joybuy
ASUS ZenWiFi BT8 mesh system, 2-pack

ASUS ZenWiFi BT8 (2-pack)

A two-point mesh system to compare if you want to try two positions around the kitchen; the Wi-Fi standard alone won’t predict the coverage.

Tri-band Wi-Fi 7; 1 and 2.5 Gbps ports.

View at Joybuy
TP-Link Deco X20 mesh system, 2-pack

TP-Link Deco X20 (2-pack)

This system could suit you if you want to test two points and can use ethernet backhaul where running a cable is practical.

Wi-Fi 6; AX1800; two ethernet ports per point; supports ethernet backhaul.

View at Joybuy
TP-Link Deco M4 mesh system, 3-pack

TP-Link Deco M4 (3-pack)

Three points give you several positions to test; first decide whether you need the extra points along the route to your study room.

Dual-band Wi-Fi 5 on 2.4 and 5 GHz; roaming between points.

View at Joybuy
TP-Link Deco X50 mesh system, 3-pack

TP-Link Deco X50 (3-pack)

This system could suit you if you want to try several intermediate positions and can use ethernet backhaul if you’re able to run a cable.

Dual-band Wi-Fi 6; three gigabit ports per point; optional ethernet backhaul, according to TP-Link.

View at Joybuy

Frequently asked questions

How can I check whether I need mesh to access my study portal?

First, test with a computer connected to your home network via a cable, then compare the result with Wi-Fi in your study room. If the wired connection is repeatedly slow too, investigate your provider connection first; mesh is designed to extend your network around your home.

Where should I put a wireless mesh point if the kitchen is in the way?

Don’t automatically put it where the Wi-Fi has already dropped out. Instead, test a position partway along the route with as few obstacles as possible. The Consumers’ Association recommends placing Wi-Fi points no more than two rooms apart, where possible.

When is it worth using a cable between mesh points?

A cable is an option if there’s a practical route for it and your chosen system supports ethernet backhaul. NETGEAR explains that this connection doesn’t use Wi-Fi bandwidth between points; also check which ports you need.

Can I keep my provider’s router and connect my own mesh system?

That depends on your connection and the capabilities of the mesh system. ACM ConsuWijzer explains that you’re free to choose your router, but notes that you can’t always choose your own equipment; if necessary, ask your provider for the connection settings and check the mesh system’s operating mode.

Which labels and requirements should I check for Wi-Fi equipment?

The Dutch Authority for Digital Infrastructure states that equipment must carry the correct CE marking. Wireless equipment placed on the European market from 1 August 2025 must also meet stricter applicable digital security requirements; check the information for the specific product.