Who is this choice relevant to?

Student with weak Wi-Fi in their study space

You want to access your study portal from a room where the existing signal is too weak. The position of the nodes and the connection between them both matter. The Consumentenbond discusses signal and placement in its Wi-Fi advice.

Student with a crowded shelf

You have limited space for networking equipment, while still needing room for the power supply and cables, as well as a suitable spot for the Wi-Fi node. The dimensions of the eero 6+ router and the plug-in design of the FRITZ!Repeater 1200 AX are useful points of comparison.

Resident who can use a cable

You can connect your study space or mesh nodes using Ethernet and want to weigh this option against a fully wireless setup. Tweakers discusses wired backhaul, and TP-Link lists it as an option for the Deco X50.

What should you look for when choosing?

Keep your existing router

Choose this if: you can already access your study portal reliably from your intended workspace. First check your router’s position and the connection at your desk.

Bear in mind: this won’t solve a genuine coverage problem in another room.

Compact, freestanding mesh system

Choose this if: your coverage is too weak and you have room for the device, power supply and cables. According to eero, the eero 6+ router measures 99,4 × 97 × 65,8 mm.

Bear in mind: according to eero, the eero 6+ Extender isn’t a standalone modem router and has no Ethernet ports.

Mesh nodes with wired backhaul

Choose this if: you can run a network cable between the nodes, for example if distance or obstacles make their wireless connection less reliable.

Bear in mind: you’ll need to plan the cable route and make room for the connections. Tweakers describes wired backhaul as the most stable way to connect mesh nodes.

Repeater for an existing FRITZ! network

Choose this if: you already have a suitable FRITZ! setup and want to save shelf space. FRITZ! lists a gigabit LAN connection for the Repeater 1200 AX.

Bear in mind: the repeater doesn’t replace your modem and main router on its own. Its mesh features depend on your existing setup.

For consumers considering mesh Wi-Fi in a study space with limited shelf room, coverage, placement, connections and the value of extra equipment may each be the main priority.

What to consider What to look for when buying Who should give this more weight?
Coverage in your study space Check the connection where you work and choose a position with as few obstacles as possible. The Consumentenbond advises taking obstacles and the connection between Wi-Fi nodes into account. If I can’t reliably access the portal at my desk, I want to know whether an extra node can bridge the gap between the router and my workspace. Around 33% of consumers prioritise coverage in their study space.
Space and placement Compare the dimensions of the exact model and leave room for the power supply and cables. If it’s a plug-in model, check where the node will actually sit. With limited shelf space, I also need to consider the cables and a practical place for the Wi-Fi node. Around 27% of consumers put available space and placement first.
Connections and router functions Decide whether you need a main router or an additional node, and check the number of Ethernet ports on the exact model. Remember to account for ports occupied by your modem, cables or devices. I want to know in advance whether the device I choose will work with my existing network and the devices I want to connect by cable. Around 20% of consumers prioritise connections and network functions.
Cost and value of extra nodes Work out how many nodes you need in your chosen locations and compare the features of the exact packs. If your connection already works well, extra equipment won’t solve a coverage problem that you don’t have. If my connection in the study space is already good enough, I don’t want to buy extra equipment without a clear reason. Around 20% of consumers prioritise the total cost and value of an extra node.

Common mistakes

  • Putting an extra node behind books or deep inside a cupboard

    Obstacles can interfere with the connection between the node and the rest of your network, even if the device itself is close to your desk.

    First, choose a position where the node still has a good connection to the previous one. Then check that the device, power supply and any cables will fit there.

  • Mistaking an extender for a standalone router

    According to eero, the eero 6+ Extender has no Ethernet ports and can’t be connected to a modem on its own.

    Before buying, check the full model name, version and connections.

  • Treating maximum range or a Wi-Fi generation as a guarantee

    The connection between nodes and their position around your home both matter. A claimed range alone doesn’t tell you how well the connection will work at your desk.

    Base your choice on the position of your router and nodes, the number of units you need and whether you can connect them with a cable.

Brands to consider

These brands offer different types of equipment for mesh Wi-Fi or extending your network. Check that each model and version will work with your existing network and fit the space available.

eero

The eero 6+ router may be worth considering if you’re looking for a compact freestanding device and want to compare its dimensions and ports.

  • According to eero, the router measures 99,4 × 97 × 65,8 mm and has two gigabit ports.
  • According to eero, the eero 6+ Extender has no Ethernet ports and isn’t a standalone modem router. Check which version you need.

TP-Link

The Deco X50 range may suit you if you’re considering a mesh system with the option of Ethernet backhaul.

  • TP-Link lists three gigabit ports and optional Ethernet backhaul for the Deco X50.
  • Check how many nodes are included in the pack you choose and how many ports will be free once you’ve connected your modem and cables.

FRITZ!

The FRITZ!Repeater 1200 AX is an extension option to consider if you already use a suitable FRITZ! mesh setup.

  • FRITZ! lists Wi-Fi 6 and one gigabit LAN connection for this model.
  • It’s a repeater, not a standalone replacement for your modem and main router. Its mesh features depend on your existing setup.

ASUS

The ZenWiFi BD4 is worth considering if you want to compare mesh Wi-Fi and 2,5GbE connections.

  • ASUS specifies Wi-Fi 7, two 2,5GbE WAN/LAN ports and dimensions of 140 × 70 × 140 mm for the BD4.
  • Check whether the pack on offer contains one, two or three nodes. The features listed don’t automatically make this model a better choice if you only need to access a study portal.

Joybuy products for mesh Wi-Fi

This selection includes mesh systems and mesh routers for a study space, with models offering multiple nodes, Ethernet connections and PoE. For the exact model, check that it meets the applicable European requirements for radio equipment. According to the Rijksinspectie Digitale Infrastructuur, stricter digital security requirements have applied since 1 August 2025.

TP-Link Deco E4, 3-pack, dual-band mesh system with Wi-Fi 5

TP-Link Deco E4, 3-pack, Wi-Fi 5

This set of three mesh units may suit you if you want to use several nodes and connect devices by cable.

The product name lists dual-band Wi-Fi on 2,4 GHz and 5 GHz, Wi-Fi 5 (802.11ac) and two Ethernet ports per unit.

View at Joybuy
TP-Link Deco X50, 3-pack, mesh system with Wi-Fi 6

TP-Link Deco X50, 3-pack, Wi-Fi 6

This set of three mesh nodes is an option if you want to connect several nodes and are considering wired backhaul.

TP-Link lists optional Ethernet backhaul. The product information specifies three gigabit ports per unit and dual-band Wi-Fi 6 (802.11ax).

View at Joybuy
Huawei eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router

Huawei eKit OptiX FG736 BE3600, Wi-Fi 7

This mesh router may suit you if you’re looking for a dual-band Wi-Fi 7 setup with a scalable mesh network.

The product information specifies one SSID for the mesh system.

View at Joybuy
Huawei eKit OptiX FG630 AX3000 dual-band Wi-Fi 6 mesh router

Huawei eKit OptiX FG630 AX3000, Wi-Fi 6

This dual-band mesh router is an option if you’re considering a mesh network with one network name and roaming.

The product name lists AX3000 and Wi-Fi 6. The product information specifies one SSID and roaming.

View at Joybuy
TP-Link Deco X50-PoE, 2-pack, mesh system with Wi-Fi 6

TP-Link Deco X50-PoE, 2-pack, Wi-Fi 6

This set of two mesh nodes may suit you if PoE support fits the way you plan to position your equipment.

The product information lists dual-band Wi-Fi 6, PoE support, two Ethernet ports per unit and WPA3.

View at Joybuy

Frequently asked questions

Where should you put a wireless mesh node if your desk has little space?

Choose a spot where the node still has a good connection to the previous one, not simply the spot closest to your desk. The Consumentenbond advises keeping obstacles to a minimum. You’ll also need to allow room for the power supply and cables.

Do you need to replace your broadband provider’s modem to use mesh Wi-Fi?

Not necessarily. First decide whether you’re connecting an additional Wi-Fi node or want to use your own modem or router. According to ACM ConsuWijzer, you have the right to choose your own router, but a provider can refuse an insecure device. If you use your own modem, connection settings may also matter, as may the network type for fibre broadband.

When is it useful to connect mesh nodes with a cable?

A wired connection is an option if you can run a network cable between the nodes and the route is practical. Tweakers describes wired backhaul as the most stable way to connect mesh nodes. Also check which Ethernet ports are available on the model you choose.

How can you keep your router and Wi-Fi devices secure?

Use a strong password and keep your router and Wi-Fi devices up to date. The Consumentenbond recommends these security measures, and ACM ConsuWijzer also points out that your own device needs to be kept up to date.

Do you need a licence for ordinary home Wi-Fi in the Netherlands?

According to the Rijksinspectie Digitale Infrastructuur, Wi-Fi generally falls under licence-exempt frequency use, with no notification or registration requirement when the conditions of use are met. Equipment sold in the Netherlands must also comply with the applicable rules for radio equipment.