Families with a study area that’s hard to reach
You need coverage mainly behind walls or on another floor. Also check whether an additional Wi-Fi point can still get a good connection to the rest of the network.
Start with a wired speed test to check that your internet connection is working properly, then identify where your Wi-Fi coverage falls short. Choose a mesh Wi-Fi system based on the location of your study area, the connection between the Wi-Fi points and the ports you need. A higher advertised Wi-Fi speed doesn’t guarantee a better connection in your home.
You need coverage mainly behind walls or on another floor. Also check whether an additional Wi-Fi point can still get a good connection to the rest of the network.
You want several screens to keep working smoothly alongside schoolwork or study. Treat your broadband speed and your home’s wireless connection as separate factors.
If you can run a cable to your study area or want to connect a computer there, the number of Ethernet ports and the option of wired connections between mesh points are important considerations.
For a study area with several screens, the main things to weigh up are coverage, simultaneous use, wired connections and family network management.
| What to consider | What to look for | Best suited to |
|---|---|---|
| Coverage to the study area | Plan where to place the additional Wi-Fi point between the router and your study area. Take walls, ceilings and other obstacles into account. | If my study area is behind walls or on another floor, I want coverage there without placing the extra point in an existing dead zone. Around 36% of consumers say coverage in their study area is their main concern when buying. |
| Several streams at once | Compare a wired speed test by the router with the signal in the places where your screens are used. Mesh Wi-Fi won’t speed up a broadband connection that’s too slow. | If several family members are watching and studying at the same time, I want to know whether the bottleneck is the internet connection or the Wi-Fi at home. Around 29% of consumers give support for simultaneous streaming their top priority. |
| Wired connections | Check the number of Ethernet ports on each unit and whether the model you choose supports wired connections between mesh points. | If I’d rather connect the computer in my study area with a cable, I want enough suitable ports and the right connection between the units. Around 21% of consumers put a wired connection in their study area first. |
| Family network management | Check which features are available with the set and mode of use you’ve chosen, and find out how updates are managed. | If several family members use the network, I want to be able to manage settings and access easily. Around 14% of consumers name family network management as their main concern when buying. |
Advertised speeds don’t guarantee the performance you’ll get through walls, via a second unit or on an older device.
Test your internet connection over a wired connection, then check the signal, placement and connection between the Wi-Fi points.
The additional point also needs a usable connection to the rest of the network.
Plan its position between the router and your study area. If the wireless route isn’t suitable, check whether you can connect the points with a cable.
This set-up may require an extra unit or cabling.
According to ASUS, the ASUS ZenWiFi BD4 is dual-band, operating on 2.4 and 5 GHz. The Wi-Fi version alone doesn’t determine performance.
Compare the available bands, ports and connection options with what you need at home, rather than relying on the version number alone.
The Deco X50 is a Wi-Fi 6 mesh product range worth considering if you want to compare multiple Wi-Fi points, Ethernet ports or the option of wired backhaul.
The FRITZ!Mesh Set 1700 is worth comparing if you want to build a mesh network around an existing router or a suitable modem or ONT set-up.
The ZenWiFi BD4 is an AiMesh option worth comparing if you’re looking for features such as 2.5-gigabit ports and network management tools.
These mesh sets are designed to connect several areas of your home, with a focus on Ethernet ports and wired connection options.
No image available
Suitable if you want to plan for several mesh points and wired connections.
No image available
The set of three units may suit you if you’re planning to place points in several locations.
No image available
An option worth comparing if you want to connect a mesh set-up with PoE support.
No image available
Suitable if you want to compare several mesh points and 2.5-gigabit ports.
No image available
An option worth comparing if you need several Wi-Fi points and wired connections.
Not before you’ve checked the connection: test it using a wired connection by the router, then compare the results with the signal in the areas where you’re having problems. Netflix recommends at least 15 Mbps for one 4K UHD stream; this isn’t a total speed requirement for all your family’s activities combined.
Don’t put the point where the signal has already dropped out. Place it somewhere with a good connection to the other Wi-Fi point. The Consumentenbond recommends keeping obstacles to a minimum and suggests the middle of the home as an option if coverage is weak at the far end.
According to ACM ConsuWijzer, you have the right to choose your own router; a provider can’t simply insist that you use a particular brand or model. The device must meet the relevant requirements and be kept up to date. Ask your provider for the connection settings you need: this doesn’t mean every mesh device can directly replace a modem or fibre ONT.
According to the Rijksinspectie Digitale Infrastructuur, you don’t need a licence to use Wi-Fi on the designated frequencies, provided you meet the conditions of use. The RDI says there’s no notification or registration requirement for licence-exempt frequency use; make sure the equipment’s country settings are configured correctly.
Check the stated power consumption of the Wi-Fi points and review the update and warranty terms for the exact set, along with any conditions for extra features. The Consumentenbond treats energy use and security as separate parts of its testing method.