Who is this buying guide for?

A studio with a weak signal upstairs

Do you share a workspace, and is the connection noticeably worse at the desk upstairs? Check the signal on both floors and make sure an access point along the way can still receive a usable signal. The Consumentenbond recommends paying attention to where you place your Wi-Fi points.

A studio with lots of people online at once

If colleagues use laptops and online applications at the same time, coverage isn’t the only thing that matters: the connection via wireless satellites matters too. Tweakers notes that with mesh systems, a shared wireless connection can affect performance when the network is busy.

A studio with an Ethernet connection to the desk

If you can use Ethernet upstairs, compare an access point connected by cable with a fully wireless connection between the points. The Consumentenbond and TP-Link highlight placement and Ethernet backhaul as factors to consider.

What should you look for?

Mesh with a wired connection

Choose this option if: there’s an Ethernet connection upstairs or you can install one.

Bear in mind: the cable route, ports and connection method supported by the system. TP-Link lists different connection requirements for Deco, depending on the mode.

Mesh with a wireless connection

Choose this option if: cabling isn’t practical and an access point along the way can still receive a usable signal.

Bear in mind: performance varies by system and placement. In its test, Tweakers found that performance dropped when using more distant wireless satellites with the Deco X50 (3-pack).

Extending an existing FRITZ!Box

Choose this option if: the studio already has a compatible FRITZ!Box and you mainly need an extra access point upstairs.

Bear in mind: a repeater isn’t a complete router-and-satellite system. FRITZ! says this repeater can be integrated into a mesh network with a FRITZ!Box running FRITZ!OS 7 or later.

What to consider What to check before buying Who should consider this?
Coverage upstairs Check the signal along the route upstairs and how many Wi-Fi points you can place. If I mainly need a reliable connection at the desk upstairs, I want to know whether an access point along the way will still have a good connection. Around 31% of consumers put coverage upstairs first.
Several people online at once Compare the connection between the points and consider how many wireless hops are needed. When several colleagues are working online at the same time, I want the connection via a wireless satellite to suit that shared use. Around 25% of consumers prioritise capacity for multiple users.
A wired workspace Check whether Ethernet is available, which port is used as the uplink and which ports will be left for the desk. If I want to connect an access point or work device upstairs by cable, I need to know how the ports will be used in my setup. For around 25% of consumers, a wired connection is the main priority.
Management and costs Check the options for guest access, security settings and the terms for any additional services. In a shared studio, I want to be able to weigh up access rights and ongoing feature costs. Around 19% of consumers look at management and costs first.

Common buying mistakes

  • Placing an extra wireless point right next to the desk with poor coverage

    The access point still needs to receive a usable connection from the rest of the network. The Consumentenbond recommends placing Wi-Fi points where they can communicate well with one another.

    Check the signal in a spot between the two, or consider running Ethernet upstairs if possible.

  • Assuming the advertised combined speed is available at every desk

    A combined speed rating alone doesn’t tell you how a system performs in every room. In its test, Tweakers found lower performance via more distant wireless satellites with the dual-band Deco X50.

    Compare the connection between the points, the number of wireless hops and test results for the exact system.

  • Confusing an add-on with a complete mesh system

    The FRITZ!Repeater 3000 AX is an add-on. According to FRITZ!, the described mesh integration via LAN requires a FRITZ!Box running FRITZ!OS 7 or later.

    Check which main router you have, its software version and what’s included in the box.

    You may also need a compatible main router to use the integration described.

  • Assuming all security and management features are included indefinitely

    Additional features may be subject to terms that vary by product and service.

    Before buying, check which features work without a subscription and what the current terms are.

    Tweakers notes that the tested Deco X50 requires a subscription for advanced security and parental control features. NETGEAR includes one year of Armor with the RBK763S; check what happens after that.

Brands to compare

TP-Link

The Deco X50 is a dual-band Wi-Fi 6 system to compare if you’re choosing between wireless and wired connections between Wi-Fi points.

  • Tweakers found the tested Deco X50 (3-pack) easy to set up.
  • Tweakers found that performance dropped via more distant wireless satellites. This applies to the system tested and isn’t a judgement on every Deco system.

ASUS

The ZenWiFi XT9 is a tri-band option to compare if access point mode and multiple Ethernet ports are important to you.

  • ASUS Netherlands lists one 2.5G WAN port, three gigabit LAN ports and access point mode for the XT9.
  • ASUS warns that 160 MHz on 5 GHz may not be available in some regions.

FRITZ!

The FRITZ!Repeater 3000 AX is an add-on option to consider if you already have a compatible FRITZ!Box.

  • FRITZ! lists two gigabit LAN ports.
  • For the described mesh integration via LAN, FRITZ! specifies a FRITZ!Box running FRITZ!OS 7 or later.

NETGEAR

The Orbi RBK763S is a tri-band Wi-Fi 6 system to compare if a dedicated connection between the router and satellites is important to you.

  • NETGEAR lists a dedicated backhaul and gigabit ports.
  • NETGEAR includes one year of Armor; check the terms that apply after this period.

Joybuy products

The products below are mesh Wi-Fi systems to compare for a shared studio, with a range of models and Wi-Fi specifications.

ASUS ZenWiFi BT8, white, 2-pack

ASUS ZenWiFi BT8 (2-pack), white

An option to compare if you’re considering a tri-band mesh system for the studio.

Tri-band (2,4/5/6 GHz); Wi-Fi 7 (802.11be); 2-pack.

View at Joybuy
ASUS ZenWiFi BT10, white, 2-pack

ASUS ZenWiFi BT10 (2-pack), white

An option to compare if you’re looking for a tri-band mesh system for a shared studio.

Tri-band (2,4/5/6 GHz); Wi-Fi 7 (802.11be); 2-pack.

View at Joybuy
TP-Link Deco XE75 Pro, 3-pack

TP-Link Deco XE75 Pro (3-pack)

A mesh system to compare if you’re considering Wi-Fi 6E and multiple units for your studio.

Tri-band (2,4/5/6 GHz); Wi-Fi 6E (802.11ax); 3-pack.

View at Joybuy
TP-Link Deco XE75, tri-band mesh Wi-Fi 6E

TP-Link Deco XE75

A model to compare if you’re considering a tri-band mesh Wi-Fi system for the studio.

Tri-band (2,4/5/6 GHz); Wi-Fi 6E (802.11ax).

View at Joybuy
TP-Link Deco X50-PoE, dual-band, 3-pack

TP-Link Deco X50-PoE (3-pack)

An option to compare if you’re looking for a mesh system with a PoE model and a dual-band setup.

Dual-band (2,4/5 GHz); Wi-Fi 6 (802.11ax); 3-pack; 2 Ethernet ports.

View at Joybuy

Frequently asked questions

How can you tell whether your studio needs a mesh system?

First, check the connection next to the main router, then at the desk upstairs. If you’re having problems next to the router too, check your internet connection and router settings. The Consumentenbond recommends starting by taking measurements.

Where should you place a wireless access point for the workspace upstairs?

Don’t automatically put it where the signal is weakest: the point itself still needs to receive a connection from the rest of the network. The Consumentenbond recommends keeping obstacles between the points to a minimum, and suggests using an app or indicator lights to help find the right spot.

Is Ethernet upstairs an alternative to wireless mesh?

Yes. If there’s a suitable route for a cable, Ethernet can provide the connection between Wi-Fi points. Check which ports and connection method your chosen system requires; TP-Link lists different connection requirements for Deco, depending on the mode.

Can you extend an existing FRITZ!Box with a FRITZ!Repeater 3000 AX?

This can be an option if the studio already has a compatible FRITZ!Box. For the described mesh integration via LAN, FRITZ! specifies a FRITZ!Box running FRITZ!OS 7 or later. Also check that you’re looking for an add-on rather than a complete mesh system.

Are security and management features always included?

Not necessarily; terms vary by system and service. Tweakers notes that the tested Deco X50 requires a subscription for advanced features, while NETGEAR includes one year of Armor with the RBK763S. Check the terms for the exact model and what happens when any included period ends.