Who is this buying guide for?

A studio with Wi-Fi dead spots

For a shared studio where the Wi-Fi signal is weak in some areas and deciding where to place multiple access points is the first priority. The Dutch Authority for Digital Infrastructure recommends taking placement and channel congestion into account.

An evening team working at the same time

For a team using multiple devices at once and looking to compare bands, connections between mesh nodes and network ports, rather than focusing solely on an advertised top speed. TP-Link and ASUS product specifications show how individual models differ.

A studio with an existing router

For a studio looking to add mesh to its existing network and check router or access point mode, cabling and guest access in advance. TP-Link and ASUS describe these features for specific systems; the Netherlands Authority for Consumers and Markets explains the freedom to choose a modem and router with business contracts.

What should you look for when buying?

First, identify where the Wi-Fi signal is weak and whether you can run cables between mesh nodes. Then compare the ports and bands you need with the devices and router already in your studio.

What to consider What should you check? Who should consider this?
Coverage in work areas Map out weak spots and potential locations for mesh nodes; check whether there’s a power socket and, if needed, an ethernet connection nearby. If I work in different parts of the studio, I want to know where an extra node could be useful. Around 36% of consumers give top priority to coverage in areas with a weak signal.
Working at the same time Check how many devices will be active at once and whether you can connect the mesh nodes by cable. When the team is online together in the evening, I look at the connection between the nodes and what the devices themselves can handle. Around 29% of consumers prioritise capacity for simultaneous use.
Existing network Check router and access point modes, guest access and how many wired connections you need. If the studio wants to keep its current router and also welcomes guests, I want to know in advance how the mesh system will connect to it. Around 21% of consumers prioritise compatibility with their existing network.
Total running costs Allow for any cables or switches you may need, and check which software features are free or paid. If I’m mainly concerned with the total cost, I want to know what else I’ll need besides the system and which features require a subscription. Around 14% of consumers put cost first.

Common buying pitfalls

  • Assuming a combined Wi-Fi speed figure is the speed you’ll get at each workstation

    An advertised total speed doesn’t tell you what speed each device in the studio will achieve. Actual throughput and coverage also depend on the devices you use, obstacles and network congestion.

    Compare the connection between the mesh nodes and their ports with your setup. Don’t base your decision on the combined wireless speeds alone.

  • Putting a mesh node in the furthest spot without checking whether it can get a usable signal

    An extra node needs to stay connected to the rest of the network, so its location and any cabling matter.

    Plan the locations first and check whether ethernet backhaul is possible.

  • Assuming all security features are included

    TP-Link’s Deco X50 manual distinguishes between a free HomeShield Basic Plan and a paid Pro Plan.

    For the model you choose, check which features your studio needs and which require a paid plan.

Brands to compare

TP-Link

The Deco X50 and Deco BE65 (EU) V1 illustrate different mesh configurations. Check the version and the connection options you need.

  • According to the Dutch product specifications, the Deco X50 has three gigabit ports per unit, while the Deco BE65 (EU) V1 has four 2.5 Gbps ports.
  • Check which HomeShield features are included with the free basic plan and which require a paid plan.

ASUS

The ZenWiFi XT9 is an option to consider when comparing a tri-band Wi-Fi 6 system with router or access point mode.

  • The Dutch specifications list two 5GHz bands, a 2.5G WAN port, three gigabit LAN ports and guest network support.
  • ASUS says that 160MHz channel availability may vary by region; check what applies to the exact version.

NETGEAR

The Orbi 770 series is a tri-band Wi-Fi 7 system to consider if you’re weighing up wireless backhaul against a wired option.

  • NETGEAR lists a 2.5G wired backhaul option for the RBE773 system.
  • Manufacturer claims for coverage and speed aren’t measurements taken in your studio; also check what’s included in the specific package.

Mesh products at Joybuy

This selection of Joybuy products includes mesh systems for work areas spread across a studio, with options offering different numbers of nodes, bands and Wi-Fi generations. Before buying, check the specifications and the applicable compliance requirements for the exact version.

TP-Link Deco BE68 mesh system, 2-pack

TP-Link Deco BE68 (2-pack)

A mesh system with two units to consider if you want to spread coverage across several work areas.

Pack size: 2-pack.

View at Joybuy
ASUS ZenWiFi BT8 tri-band Wi-Fi 7, 2-pack

ASUS ZenWiFi BT8 (2-pack) tri-band Wi-Fi 7

A mesh system to compare if several work areas need to be connected at the same time.

Pack size: 2-pack. Tri-band Wi-Fi 7.

View at Joybuy
ASUS ZenWiFi BD4 dual-band Wi-Fi 7

ASUS ZenWiFi BD4 dual-band Wi-Fi 7

A mesh option to compare if you also want to assess wired connections for work areas.

Dual-band Wi-Fi 7; 2.4 GHz and 5 GHz bands.

View at Joybuy
TP-Link Deco X50 dual-band Wi-Fi 6, 3-pack

TP-Link Deco X50 (3-pack) dual-band Wi-Fi 6

A mesh system with three units to consider if you want to address weak spots across several work areas.

Pack size: 3-pack. Dual-band Wi-Fi 6; 2.4 GHz and 5 GHz bands.

View at Joybuy
TP-Link Deco XE75 Pro tri-band Wi-Fi 6E, 3-pack

TP-Link Deco XE75 Pro (3-pack) tri-band Wi-Fi 6E

A mesh system with three units to compare for a studio with several work areas and devices connecting at the same time.

Pack size: 3-pack. Tri-band Wi-Fi 6E; 2.4 GHz, 5 GHz and 6 GHz bands.

View at Joybuy

Frequently asked questions

Does your studio need to replace its business internet provider’s router?

Not necessarily. First check whether your chosen mesh system can work behind the existing router in access point mode. For business contracts, the Netherlands Authority for Consumers and Markets explains that you may choose your own modem and router, subject to conditions including security. If necessary, ask your provider for the connection settings you need.

How do you connect Deco nodes using cables?

The right connection depends on the mode you choose. For access point mode, TP-Link describes connecting a satellite Deco by cable to a Deco unit or the main router. Check the setup instructions for your own configuration and make sure ethernet backhaul is active.

Will mesh fix a slow internet connection?

No. Mesh doesn’t increase the capacity of your provider’s connection. Check whether the connection is also slow right next to the router, and look at placement and channel congestion before adding extra nodes. The Dutch Authority for Digital Infrastructure notes that busy Wi-Fi channels can slow down your connection.

What ongoing costs should you check?

Check whether you need extra cables or switches and which software features require payment. TP-Link’s Deco X50 manual lists a free HomeShield Basic Plan and a paid Pro Plan; check the current terms for the exact version.

Can you use Wi-Fi in a Dutch business premises without a licence?

According to the Dutch Authority for Digital Infrastructure, Wi-Fi can be used in business premises without a licence if you use the designated frequencies and follow the conditions of use. When buying, also check the applicable CE compliance for the exact version: stricter requirements have applied since 1 August 2025 to wireless equipment placed on the European market. This does not, by itself, confirm that a specific 6GHz configuration is permitted.