Who is mesh Wi-Fi suitable for?

Housemates watching live together

You want an uninterrupted stream on a shared screen while everyone else stays online. So, test the connection where you’ll be watching and check how the mesh points are connected to one another. Tweakers discusses wired backhaul as a stable connection between points.

People in rooms with poor signal

If you mainly need coverage through walls or on another floor, map out the layout first and see whether you can run a cable. The Consumers’ Association discusses using two points to improve Wi-Fi across two floors or in several rooms.

Housemates sharing the cost

You’re looking for a setup that suits your home, without unnecessary extra points or features. Check how the system connects to your existing modem and agree on who will manage the network. The Consumers’ Association discusses choosing the size of a set based on the number of rooms and floors.

What should you look for when choosing?

First, test the connection by the router, then where you plan to watch. Next, find out whether you can run a cable to the screen or between mesh points, and only then decide how many points you need.

What to consider What to look for when buying Who is this most important for?
Stable livestream Test the connection by the router and where you plan to watch; check whether you can connect the screen via Ethernet. I want to keep watching the concert while my housemates are online; around 36% of consumers prioritise a stable livestream.
Coverage in several rooms Map out the rooms, floors and obstacles; place the points where they can still communicate well with one another. If my room is behind walls or on another floor, I want to know how many points I’ll need; around 29% of consumers prioritise coverage in rooms further away.
Simultaneous use and management Check the network and guest options, and how the system works with your existing modem. When my housemates and I are streaming, calling or online at the same time, I want a network setup that meets our needs; around 21% of consumers prioritise simultaneous use and management.
The right set size Choose the number of points based on your floor plan and test results; check the features and connections included in the model. I don’t want to install points my home doesn’t need; around 14% of consumers prioritise choosing the right set size.

Common buying mistakes

  • Buying a mesh system without testing your internet connection

    A slow connection by the router and weak Wi-Fi where you plan to watch call for different solutions. The Consumers’ Association recommends testing your connection before replacing anything.

    Test it in both places and compare the results, ideally while your housemates are online too.

  • Putting a wireless mesh point right at the back of the room

    A point placed somewhere with barely any signal may not be able to pass the connection on properly. The Consumers’ Association recommends keeping obstacles between points to a minimum.

    Try a position where the point can still get a usable connection to the rest of the network. Use Ethernet backhaul if you have a cable route available.

  • Assuming versions with the same model name contain the same things

    A 2-pack and a 3-pack are different set sizes, so the model name alone won’t tell you how many points you’ll get.

    Before buying, check the full model name and how many mesh points are in the box.

Brands to compare

TP-Link

Deco sets are worth considering if you’re looking for an expandable Wi-Fi 6 setup with Ethernet ports.

  • TP-Link says the Deco X50 has three gigabit ports and optional Ethernet backhaul.
  • The X50 is dual-band. The stated coverage and device capacity are manufacturer claims, not measurements taken in a student house.

FRITZ!

The Mesh Set 1700 is an option if you want to keep your existing modem and are looking for an expandable set.

  • FRITZ! lists automatic updates and a five-year warranty for this set.
  • According to FRITZ!, when used behind a router from another brand, the set creates a separate home network. Check the set size and connection method you need.

NETGEAR

The Orbi RBK763S shows how a set with a router and two satellites can be configured.

  • NETGEAR describes this model as having a dedicated wireless connection between the router and satellites.
  • The speed, coverage and number of devices stated by the manufacturer are not measurements taken in your home. Check the version and specifications of the model you choose.

ASUS

ZenWiFi sets may be worth considering if access point mode and network management are important to you.

  • The official specifications for the US version of the XD5 list access point mode, a guest network and gigabit ports.
  • Those specifications don’t prove that every Dutch ZenWiFi version has the same features. Check the exact version.

Joybuy products

This selection includes TP-Link Deco mesh sets with different connection options and set sizes. Choose based on your home’s layout, whether you can connect devices or points by cable, and how the set works with your existing modem.

TP-Link Deco BE68 2-pack

TP-Link Deco BE68 2-pack

A good fit for a two-point setup if you’re looking for Wi-Fi 7 and wired connections.

The product description lists tri-band Wi-Fi 7, MLO, and wired and wireless backhaul. Each unit is listed with 10, 2.5 and 1 Gbps ports.

View at Joybuy
TP-Link Deco PX10 dual-band Wi-Fi 6

TP-Link Deco PX10 dual-band Wi-Fi 6

This may be a good fit if you want to check whether your existing electrical wiring can be used as a network connection alongside Wi-Fi.

The product description lists Powerline, Wi-Fi 6 and three gigabit ports per unit. Router and access point modes are also listed. Check whether your home’s electrical wiring is suitable for the connection you have in mind.

View at Joybuy
TP-Link Deco X20 AX1800 Wi-Fi 6 2-pack

TP-Link Deco X20 AX1800 Wi-Fi 6 2-pack

A two-point option to compare if two mesh points suit the rooms or floors in your home.

The product description lists Ethernet backhaul, mesh roaming, Ethernet ports, a guest network, and setup and management via the Deco app.

View at Joybuy
TP-Link Deco X50 Wi-Fi 6 3-pack

TP-Link Deco X50 Wi-Fi 6 3-pack

This may suit you if your home’s layout calls for three mesh points and you want to compare wired connection options.

The product description lists Wi-Fi 6, three gigabit ports per unit and optional Ethernet backhaul. Setup via the Deco app is also mentioned.

View at Joybuy

Frequently asked questions

How can you check whether mesh Wi-Fi will fix dropouts during the live concert?

First, test the connection by the router, then where you plan to watch. If it’s slow even by the router, weak Wi-Fi coverage may not be the only cause. For watching Netflix in 4K, Netflix recommends a stable connection of at least 15 Mbps. This isn’t a general requirement for every concert platform or for an entire student house.

Where should you put an extra mesh point?

Don’t wait until you reach a spot with almost no signal to place a wireless point. The Consumers’ Association recommends keeping obstacles between points to a minimum and suggests placing a point in the middle of the home to improve weak coverage at the far end.

Can a mesh set work with your existing broadband provider’s modem?

It depends on the connection method and the modes available on the model you choose. According to FRITZ!, the Mesh Set 1700 can work behind a router from another brand, but the set then creates a separate home network. Check how the set you choose connects to your modem.

What should housemates agree on in advance about management and support?

Agree on who will manage the administrator account and who will keep the mesh points if someone moves out. Check which extra features are available for each model and what warranty or updates the manufacturer promises. For the Mesh Set 1700, FRITZ! lists a five-year warranty and automatic updates.

Do you need a licence for home Wi-Fi in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, home Wi-Fi networks are licence-exempt if you use the designated frequencies and comply with the conditions of use. The authority also states that the manufacturer applies the CE marking when radio equipment meets all applicable requirements. This does not automatically confirm that an individual item offered for sale complies.