Who is this option relevant for?

Resident in the study at the far end

You need both the Wi-Fi signal and the connection between mesh nodes to reach your room. If you can run a cable, wired backhaul could be an option.

Housemates who are online at the same time

You share the network with several people, so look beyond advertised coverage to the connections available and the devices that will be online at the same time.

Home network administrator

You want the extension to work with your existing modem or router, and need settings for passwords, updates and guest access.

What should you consider when choosing?

Mesh nodes with Ethernet backhaul

When is this a good fit? If you can run a network cable to, or towards, the study and the set you choose supports this connection.

The trade-off: The nodes communicate over the cable, but you’ll need a suitable cable route and usable ports. TP-Link describes Ethernet backhaul for Deco.

Fully wireless mesh system

When is this a good fit? If you can’t run a cable and can find a spot where an intermediate node still has a good connection to the previous one.

The trade-off: You don’t need to run a cable, but placing a node where the signal is already dropping out won’t fix the weak connection by itself. The Consumentenbond recommends choosing a spot with a usable signal.

Extending your existing router or provider’s network

When is this a good fit? If you want to keep your current network setup and first check which extension will work with it.

The trade-off: An access point or provider solution can work with your existing network, but features vary between systems. KPN SuperWifi is part of the KPN option; FRITZ! also describes a wired Repeater connection to a router from another brand.

What to consider What should you check? Who is this most important for?
Connection to the study Check whether the set supports Ethernet backhaul and has enough ports. Without a cable, look for a spot where an intermediate node still has a usable connection. If I work in a study at the far end of the house, I want to know whether the connection between the nodes can cover that distance. Around 31% of consumers put coverage first.
Using the network at the same time Check the number of usable Ethernet ports on each node and the Wi-Fi features supported. Advertised speeds are not a measure of the speed you’ll get in a room. When several housemates are online at the same time, I look at the connections available and the devices sharing the network. Around 25% of consumers prioritise simultaneous use.
Connecting to your existing modem Check the router or access point mode and connection instructions for the exact model. Ask your provider which features are available with your connection. If I want to keep using my existing modem or router, I look for an extension that works with it. For around 19% of consumers, compatibility with their existing network is the top priority.
Total cost of the extension Compare the number of nodes you need, any cabling costs and the energy use of extra nodes that stay switched on all the time. If you want to keep the cost of extending the network under control, consider what your home actually needs. Around 13% of consumers put the total cost first.
Management and security Check whether guest networking, security settings and updates are available, and agree on who will manage the network. If I manage network access for housemates and visitors, I want to know who will maintain the settings and updates. Management and security are the top priority for around 12% of consumers.

Common purchasing pitfalls

  • Placing a mesh node where the signal is already weak

    With wireless backhaul, the mesh node itself needs a usable connection to the previous one. Placing it where the Wi-Fi is already dropping out won’t fix that connection by itself.

    Try an intermediate spot where the signal is still good. If you can run a cable, check whether the set supports Ethernet backhaul.

  • Assuming advertised coverage or speed is the speed you’ll get in a room

    An advertised speed or coverage area isn’t a measure of how the connection performs through the walls and over the distances in your student house.

    Assess the placement, the connection between nodes and the ports you need separately.

  • Mistaking a similar-sounding version for the same product

    Model names, set sizes and connections can vary. A Deco X50-PoE is not the same version as a standard Deco X50; an ASUS ZenWiFi BD4 2-pack has fewer nodes than a 3-pack.

    Before buying, compare the full model name, the number of nodes and the connections with what you need.

Brands to consider

TP-Link

Deco is worth considering if you’re looking for an expandable mesh network with a choice of wireless and wired connections. TP-Link lists three gigabit ports per Deco X50 unit.

  • TP-Link describes Ethernet backhaul and an access point mode for Deco.
  • The X50 is dual-band; its advertised speed and coverage are not measurements taken in this student house. The X50-PoE and X50-5G are different versions from the standard X50.

FRITZ!

The Mesh Set 1700 is an option for extending an existing network with several nodes.

  • FRITZ! lists three Repeater 1700 nodes in the three-piece set, each with a gigabit LAN port. The brand also describes a wired connection to a router from another manufacturer.
  • When using a router from another brand, don’t assume that all the features of a combined FRITZ! mesh network will be available.

ASUS

ZenWiFi BD4 is worth considering if your network connection and connected devices can benefit from its specified ports or features.

  • ASUS specifies two 2.5-gigabit ports per BD4 unit and a dual-band Wi-Fi 7 system.
  • These are manufacturer specifications, not proof of better performance in this house. Check the exact set size and version.

KPN

SuperWifi is a provider-specific option for a student house with a compatible KPN connection, if you want to manage the network through MijnKPN.

  • KPN describes placement advice, guest Wi-Fi and options to rent or buy nodes.
  • This management option is tied to a KPN connection and won’t necessarily be available with another provider.

Joybuy products for a mesh network

These mesh systems are designed to create a network with several nodes around the home. Check that each model suits your preferred wired or wireless connection and the number of nodes you need.

TP-Link Deco BE68 mesh system, 2-pack

TP-Link Deco BE68 (2-pack)

A good fit if you’re looking for a mesh system that gives you a choice of wired and wireless backhaul.

The product description lists Wi-Fi 7, hybrid wired and wireless backhaul, and support for more than 200 devices.

Each unit is listed with 10-, 2.5- and 1-gigabit ports.

View at Joybuy
TP-Link Deco X50 mesh system, 3-pack

TP-Link Deco X50 (3-pack)

A good fit if you’re looking for a set with three mesh nodes and support for wired backhaul.

The product description lists Wi-Fi 6, optional Ethernet backhaul and three gigabit ports per unit.

The description mentions support for more than 150 devices; this is not a measure of performance in your home.

View at Joybuy
ASUS ZenWiFi BT10 mesh system, 2-pack

ASUS ZenWiFi BT10 (2-pack)

A good fit if you’re looking for a mesh system with two nodes and guest network access.

The product description lists tri-band Wi-Fi 7, AiMesh and app management.

The listed Ethernet ports include 10-gigabit ports. Check that the connections are suitable for your router and devices.

View at Joybuy
TP-Link Deco XE75 mesh system with three units

TP-Link Deco XE75

A good fit if you’re looking for a mesh system with three nodes and a guest network feature.

The product description lists Wi-Fi 6E, three units and three gigabit ports per unit.

WPA3 is also listed; check which network security settings you want to use.

View at Joybuy
TP-Link Deco X50 mesh system, 2-pack

TP-Link Deco X50 (2-pack)

A good fit if you’re looking for a set with two nodes and optional Ethernet backhaul.

The product description lists Wi-Fi 6 and three gigabit ports per unit.

The description mentions support for more than 150 devices. This figure does not indicate measured speeds in an individual room.

View at Joybuy

Frequently asked questions

Where should you place a wireless mesh node to reach the study at the far end?

Don’t wait until the connection is already dropping out before placing the node. The Consumentenbond recommends a spot with as few obstacles as possible, such as closer to the middle of the house; an app or indicator light can help you find the right place.

Can you connect a mesh node to your existing network with a network cable?

That depends on the system and the mode it’s set to. TP-Link describes Ethernet backhaul for Deco and a wired connection in access point mode; FRITZ! describes a LAN bridge connection from a Repeater to a router from another manufacturer. Check the instructions for the exact model.

Who is responsible for keeping the shared network secure?

Agree on who will keep the administrator password safe and install updates. The Consumentenbond recommends a strong password, up-to-date equipment and a guest network.

What should you check to ensure a mesh system complies with regulations in the Netherlands?

Check that the radio equipment actually being offered carries the correct CE marking. The Rijksinspectie Digitale Infrastructuur outlines the relevant European requirements; check the marking on the version you want to buy.

Do you need to register ordinary Wi-Fi or apply for a licence for it in the Netherlands?

According to the Rijksinspectie Digitale Infrastructuur, Wi-Fi on the designated licence-exempt frequencies does not need to be notified or registered, provided the conditions of use are met. This does not exempt arbitrary frequencies or equipment.