Who should consider this choice?

Someone with a hard-to-reach hobby room

You want to work or relax in a separate room and need to decide whether a wireless node there can maintain a connection to your home network, or whether you need a cable. Consumentenbond and TP-Link highlight coverage, placement and ethernet backhaul as things to consider.

Housemates who are online at the same time

You want to make video calls, stream or game in several places at once. So check the connection where you use your devices, as well as the ports you need, rather than looking only at the maximum speed on the box. Consumentenbond includes factors such as speed and coverage in its testing method.

Someone managing the existing home router

You want to extend your coverage without replacing your provider’s router without due consideration, and need to check which features will remain available in the mode you choose. TP-Link says that certain gateway features are unavailable in Deco access point mode.

What should you look for when choosing?

Start with the connection between your home network and the hobby room. Then consider simultaneous use, router management and what the complete setup will involve in practice.

Mesh with ethernet backhaul

When: if you can run a network cable to the hobby room and the wireless connection between the rooms is weak.

Trade-off: you need to be able to run a cable. Also check the ports you need and where to position the mesh node.

Wireless mesh

When: if a node in the planned position can maintain a strong enough connection to the main network and running cables is impractical.

Trade-off: walls and materials that cause interference can weaken the connection between nodes. Advertised speeds and coverage areas cannot predict performance in your home.

Extend your FRITZ! mesh network

When: if you already have a compatible FRITZ!Box set up as the Mesh Master and centralised management is important to you.

Trade-off: using a router from another brand does not automatically give you access to the integrated FRITZ! mesh features. Check your router model and the connection you need.

Node for outdoor use

When: only if the device actually needs to be mounted outdoors.

Trade-off: a weather-resistant casing will not automatically solve a weak connection to your home. Check the power supply, mounting options and connection between the rooms.

Consideration What should you look for? Who is this most relevant to?
Connection to the hobby room Check whether ethernet is an option. If not, test the signal where you plan to place each intermediate node. If I work or relax in the hobby room, I want to know whether the node there can maintain a connection to my home network. Around 33% of consumers prioritise coverage in that room.
Simultaneous use Compare the number of nodes you need, the connection between them and the ethernet ports available for devices that can be connected by cable. When housemates are making video calls, streaming or gaming at the same time, I want to assess the connection in several places where we use our devices. Around 27% of consumers give simultaneous use their highest priority.
Existing router and management Decide which device will manage the network. Check that the exact model, operating mode and firmware support the features you need. If I need to keep my provider’s router, I want to know which features the mesh system itself will manage. Around 20% of consumers prioritise compatibility with their existing router and network management.
Complete setup Plan where to place the nodes and compare the number included, any cabling needed and power consumption. If I want a reliable connection in the hobby room, I want to know in advance whether I might need extra nodes or cabling. Around 20% of consumers prioritise the cost of the complete setup.

Pitfalls to avoid

  • Buying an extra wireless node without checking the connection

    Walls and materials between nodes can weaken the signal. An extra node will not necessarily help if it cannot maintain a good connection to your home network.

    Test the planned position first. If the connection is still too weak and you can run a cable, compare ethernet backhaul.

    A wireless node may still mean you need to change its position or run cabling.

  • Assuming the maximum speed or advertised coverage reflects what you’ll get at home

    Manufacturer figures cannot predict how Wi-Fi will perform in a particular home with a separate hobby room.

    Assess the connection where your housemates use the internet and compare your results under the same conditions.

  • Assuming access point mode retains all router features

    TP-Link says that certain gateway features are unavailable in the Deco app when using Deco access point mode.

    Before buying, check that the exact model, firmware and operating mode provide the features you need.

Brands to consider

TP-Link

The Deco range includes the dual-band X50, the tri-band XE75 with Wi-Fi 6E and the X50-Outdoor, designed for outdoor use.

  • According to TP-Link, the Deco X50 supports additional Deco units and optional ethernet backhaul. The manufacturer gives the X50-Outdoor an IP65 rating.
  • Advertised coverage and speeds cannot predict performance in a particular hobby room. Certain gateway features are unavailable in the Deco app when using access point mode.

ASUS

The ZenWiFi XT9 is a tri-band Wi-Fi 6 router worth comparing if ports and operating mode are important to you.

  • ASUS lists router and access point modes, three gigabit LAN ports and one 2.5G WAN port for the XT9.
  • These are model specifications, not proof of performance in a student house. Check the exact bundle variant too.

FRITZ!

The FRITZ!Repeater 3000 AX is worth considering to extend an existing, compatible FRITZ! mesh network, including via LAN.

  • FRITZ! lists two gigabit LAN ports and integration with a FRITZ!Box acting as Mesh Master.
  • According to the manufacturer, the repeater can also be used with another router, but that does not prove that all integrated FRITZ! mesh features will be available.

Joybuy products

These Joybuy picks are mesh products designed to provide network coverage across several rooms, with models offering both wired and wireless connections between nodes. For each bundle, check that the number of nodes and available connections suit the route to your hobby room.

TP-Link Deco BE68 2-pack

TP-Link Deco BE68 2-pack

An option to compare if you want to consider both wired and wireless backhaul for your hobby room.

View at Joybuy
ASUS ZenWiFi BD4 dual-band Wi-Fi 7, white

ASUS ZenWiFi BD4 Dual-Band Wi-Fi 7, White

An option to compare if you’re looking for a ZenWiFi mesh system with a stated wired backhaul option. Check that the option applies to this exact bundle.

The product name specifies dual-band and Wi-Fi 7 (802.11be).

View at Joybuy
TP-Link Deco X50 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50 3-pack

Worth comparing for a home with several rooms if you want the option of ethernet backhaul. TP-Link says the Deco X50 supports this option.

The product name specifies dual-band Wi-Fi 6 (802.11ax). According to TP-Link, certain gateway features are unavailable in the app when using Deco access point mode.

View at Joybuy
TP-Link Deco XE75 Pro 3-pack, tri-band Wi-Fi 6E

TP-Link Deco XE75 Pro 3-pack

A tri-band mesh option to compare for several rooms. Test the connection between nodes in the planned positions.

The product name specifies tri-band and Wi-Fi 6E (802.11ax). According to TP-Link, certain gateway features are unavailable in the app when using Deco access point mode.

View at Joybuy
TP-Link Deco X50-PoE 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50-PoE 3-pack

Worth considering if you can use a single cable to provide both data and power to a mesh node. Check that PoE is suitable for your setup.

The product name specifies dual-band Wi-Fi 6 (802.11ax) and two ethernet ports. According to TP-Link, certain gateway features are unavailable in the app when using Deco access point mode.

View at Joybuy

Frequently asked questions

Can you use mesh while keeping your internet provider’s router?

Yes, if the system you choose supports that setup. TP-Link describes an access point mode for Deco that leaves your existing router as the gateway. Check which features will then be unavailable in the Deco app.

Where should you place a wireless mesh node for the hobby room?

Place it somewhere it can still connect to the previous node, rather than right where the Wi-Fi signal has already dropped out. Test the intended position. If the connection between the rooms remains too weak and you can run a cable, compare ethernet backhaul.

Do you need a licence to use Wi-Fi at home in the Netherlands?

In the Netherlands, no notification or registration is required for the licence-exempt Wi-Fi frequency use described by the Dutch Authority for Digital Infrastructure. This applies subject to the relevant conditions and is not a blanket exemption for every radio device or setting.

Can you use your own router instead of your provider’s router?

According to ACM ConsuWijzer, you have the right to use your own router in the Netherlands, subject to conditions such as the applicable safety requirements. Using a mesh system as an access point is a different option from replacing your modem-router.

What ongoing costs and updates should you consider?

Compare the power consumption of all the nodes you plan to use and check how the model you choose receives updates. Consumentenbond includes power consumption and security in its testing method; annual costs depend on the bundle you choose and how you use it.