Who can benefit from mesh Wi-Fi?

Housemates dealing with Wi-Fi dead zones

If you can download files near the modem but get a poor signal in bedrooms or on another floor, first map out the problem areas and possible locations for extra nodes. Consumentenbond and ACM ConsuWijzer recommend testing the connection with a cable near the main connection point to distinguish internet connection issues from Wi-Fi problems.

Households with lots of devices in use at once

If your housemates use laptops and phones at the same time, don’t just look at the advertised maximum speed. Consider the connection between the Wi-Fi nodes, too, and what you need in the rooms where you study or download files. Product information from TP-Link, ASUS and NETGEAR describes different ways to connect mesh nodes.

Housemates who want to keep their provider’s modem

If you want to extend your Wi-Fi without replacing your existing internet connection, check which ports and settings your chosen setup requires. Consumentenbond explains how to test Wi-Fi in different locations; before installation, also check the instructions for your specific mesh model.

What should you look for when choosing?

Consumentenbond and ACM ConsuWijzer recommend testing the connection with a cable near the main connection point. Then identify where your Wi-Fi signal falls short, and only then compare the placement, connections and contents of a mesh set.

Buying concern What to look for Who should consider this?
Signal in bedrooms and on other floors Map out problem rooms and possible locations for the nodes; check that they can reach one another wirelessly. If I download files in a bedroom or on another floor, I want to know where extra nodes will still have a connection. Around 36% of consumers put coverage in these areas first.
Downloads while several people are online Compare wired and wireless connections between nodes and consider the rooms that matter to you. An advertised maximum speed is not the same as a measured download speed. When my housemates use laptops and phones at the same time, I want the connection to remain usable where I download files. Around 29% of consumers prioritise simultaneous use.
Connecting to your modem and devices Count the WAN and LAN ports you need and check the installation instructions for the exact model. I want to keep using my provider’s modem and my existing devices, so I check the ports and settings in advance. Around 21% of consumers prioritise compatibility with existing equipment.
Cost of a shared setup Compare the number of nodes included and check for any included services and how long they last. If we’re sharing the cost, I don’t want to buy nodes we don’t need or overlook the terms of a service. Around 14% of consumers are mainly looking to avoid unnecessary spending.

Pitfalls to avoid

  • Assuming faster Wi-Fi means faster internet

    Testing the connection with a cable at the main connection point helps you tell the difference between an issue with your internet connection and weak Wi-Fi around the house.

    First, test the connection using a cable and compare the result with your contract. Only then investigate the rooms where your Wi-Fi signal falls short.

  • Placing a wireless node where the signal has already dropped out

    An extra mesh node still needs to connect to the other nodes, so distance and obstacles matter.

    Try placing it somewhere in between, with as few obstacles as possible, then check the connection in the problem room.

  • Treating different versions or coverage claims as if they’re the same

    The standard TP-Link Deco X50 and the Deco X50-PoE are different versions. What’s more, the stated coverage doesn’t guarantee Wi-Fi in every room.

    Check the full model name, number of nodes and ports for the specific version. Assess the signal in the rooms where you need Wi-Fi.

Brands to consider

TP-Link

The Deco X50 range offers mesh options for several rooms, with two- and three-node sets available.

  • TP-Link says the standard Deco X50 has three gigabit ports per node and supports Ethernet backhaul.
  • The stated AX3000 speed and coverage are manufacturer figures, not measurements taken in a student house. The X50-PoE is a different version.

ASUS

The ZenWiFi XD5 is a mesh option for anyone who wants to keep using their existing Wi-Fi devices and may be able to connect the nodes using Ethernet.

  • ASUS says the system supports older Wi-Fi generations and Ethernet backhaul.
  • ASUS quotes 445 m² for the three-node set shown; the Joybuy listing quotes 550 m². Neither figure guarantees coverage in a particular student house.

NETGEAR

According to NETGEAR, the Orbi RBK763S consists of a router and two satellites, with a separate wireless connection between the devices.

  • NETGEAR lists seven gigabit ports and one year of Armor included with the RBK763S.
  • NETGEAR’s coverage and performance claims are not based on independent tests in a student house.

Mesh Wi-Fi systems at Joybuy

This selection includes mesh sets with two or three nodes for Wi-Fi across several rooms. For each version, check that it has the connections you need and supports wired or wireless links between the nodes.

TP-Link Deco BE68 mesh set with two nodes

TP-Link Deco BE68 (2-pack)

A mesh set with two nodes for Wi-Fi across several rooms.

Wi-Fi 7 and tri-band are listed; the description mentions both wireless and wired backhaul.

View at Joybuy
TP-Link Deco M4 mesh set with three nodes

TP-Link Deco M4 (3-pack)

This three-node set is designed to provide Wi-Fi across several rooms; the app is described as helping you choose where to place the nodes.

Wi-Fi 5 (802.11ac), dual-band (2.4 GHz/5 GHz) and a stated maximum Wi-Fi speed of 1200 Mbps.

View at Joybuy
TP-Link Deco X50 mesh set with three nodes

TP-Link Deco X50 (3-pack)

A three-node set for Wi-Fi in several areas; the product information mentions optional Ethernet backhaul.

Wi-Fi 6 (802.11ax), dual-band (2.4 GHz/5 GHz) and three gigabit ports per node, according to TP-Link.

View at Joybuy
TP-Link Deco S7 mesh set with three nodes

TP-Link Deco S7 (3-pack)

This three-node mesh set is designed to provide Wi-Fi across several rooms.

Wi-Fi 5 (802.11ac), dual-band (2.4 GHz/5 GHz), three Ethernet ports per node and a stated maximum data transfer rate of 1900 Mbps.

View at Joybuy
TP-Link Deco XE75 Pro mesh set with three nodes

TP-Link Deco XE75 Pro (3-pack)

A mesh set with three nodes for Wi-Fi across several rooms; the product information mentions support for older Wi-Fi generations.

Tri-band (2.4 GHz/5 GHz/6 GHz), Wi-Fi 6E (802.11ax) and three Ethernet ports per node.

View at Joybuy

Frequently asked questions

Can mesh help if course files download slowly everywhere?

Not if your internet connection itself is the bottleneck. First, test it with a network cable near the main connection point, ideally at different times. If the connection is repeatedly much slower than agreed, contact your provider; extra Wi-Fi nodes won’t fix the issue.

Where should you place a wireless mesh node?

It’s best not to place the node somewhere the original signal has already dropped out. Try a spot in between, with as few obstacles as possible, then check the connection in the problem room.

Do you need to pay for security after buying, and what about the warranty?

Check which extra services are included with each model and for how long. NETGEAR lists one year of Armor for the RBK763S. If a product is faulty, you’re also covered by your statutory rights with the seller. This isn’t simply the same as the length of a manufacturer’s warranty, as ACM ConsuWijzer explains.

Which product requirement matters for a mesh router in the Netherlands?

Radio equipment sold on the European market must meet the relevant European requirements, and the router must carry the correct CE mark. Check the mark on the specific device; a mention in a product advert doesn’t replace it. The Rijksinspectie Digitale Infrastructuur explains the CE marking for equipment.