First, check your internet speed using a computer connected with an Ethernet cable, as the Consumentenbond recommends. If that connection is slow too, mesh Wi-Fi won’t solve the problem. If the Wi-Fi is weak mainly in your room, choose a system based on where you can place the units and how they connect to each other. TP-Link says Ethernet backhaul is more stable and faster than wireless backhaul, but it does require cables to be installed. Also check that the system is compatible with your existing router and that the specific model sold in the Netherlands has the correct CE marking, as required by the Rijksinspectie Digitale Infrastructuur.
Who is mesh Wi-Fi suitable for?
Gamer in a room with weak Wi-Fi
If your wired connection works better than the Wi-Fi in the room where you download updates, compare where you can place the units, how many you need and how they connect to the router. The Consumentenbond and TP-Link Nederland offer guidance on these tests and connections.
Household with lots of people online at once
If your housemates are downloading, streaming or making calls at the same time, first check whether your internet speed is limited or whether the wireless connection is the main problem. The Consumentenbond recommends testing your internet speed with a computer connected by an Ethernet cable.
Managing your existing network
If you want to extend coverage to more rooms without replacing your router unnecessarily, check whether access point mode or an extension to your current mesh network is right for you. ASUS describes an access point mode for the XT9, while FRITZ! describes mesh expansion with a compatible FRITZ!Box.
What should you look for when buying?
First, test your connection. Then work out whether the problem is mainly coverage, the connection between mesh units or shared network use.
| What to consider |
What to look for when buying |
Who is this important for? |
| Coverage in your room |
Compare a wired speed test with Wi-Fi in the room where you have a problem. Work out where an extra unit can still get a usable connection. |
If your update is especially slow in one room, you’ll want to know whether the signal there is weak. Around 36% of consumers give coverage their highest priority. |
| Connection between units |
Check whether you can run an Ethernet cable between the units and which ports the model has. Without a cable, placement and the wireless connection between units are important. |
If you can install cables, wired backhaul is worth comparing. Without cables, an extra unit still needs to maintain a good connection to the network. Around 29% of consumers prioritise the connection between mesh units. |
| Using the network at the same time |
Test your internet speed over a wired connection while your housemates are online, then compare it with Wi-Fi in your room. Only then check the system’s connections and features. |
If your housemates are streaming, making calls or downloading at the same time, you’ll want to know whether the internet connection or the Wi-Fi is the bottleneck. Shared use is the top priority for around 21% of consumers. |
| Cost and router compatibility |
Check who manages the router, whether you’re allowed to change its settings and whether an access point or mesh expansion will work with your existing equipment. Choose the number of units to suit the rooms where you have problems. |
If you want to keep your current router, check compatibility and the features you need first. Around 14% of consumers prioritise cost and compatibility with their existing router. |
Common buying mistakes
-
Assuming the Wi-Fi speed on the box is the speed of your game update
Your wired internet speed, the Wi-Fi in your room and a stated radio speed are different things. A mesh system won’t increase the speed of your broadband package.
First, test your connection over Ethernet, then test it in the room where you have a problem. Don’t treat the stated Mbps as a promise of download speed.
-
Putting an extra mesh unit where the Wi-Fi is worst
The unit itself still needs a usable connection to the rest of the network. Distance and obstacles can weaken the wireless connection.
Plan the route between units and look into Ethernet backhaul if you can install cables.
If the route is unsuitable, you may still need to find another place for the unit or install an extra cable.
-
Treating a FRITZ! repeater as a standalone mesh system
FRITZ! describes integrated mesh functionality with a compatible FRITZ!Box, although the repeater can also work with other routers. A repeater is not the same as a complete system with a router and several units.
Check your current router model and decide whether you need an extension or a complete system.
If the planned integrated mesh setup isn’t available, you may need additional equipment.
Brands to compare
TP-Link
The Deco X50 is a dual-band Wi-Fi 6 mesh system available in packs with different numbers of units.
- TP-Link Nederland specifies three gigabit ports per unit and optional Ethernet backhaul.
- The stated total radio speed is not a measured download speed. Check the model and hardware version.
ASUS
The ZenWiFi XT9 is a tri-band Wi-Fi 6 system with router and access point modes.
- ASUS specifies three radio bands, a 2.5G WAN port and three gigabit LAN ports for the XT9.
- ASUS warns that 160 MHz on 5 GHz may be restricted in some regions. Radio specifications don’t prove how fast a system will be in a shared student house.
FRITZ!
The FRITZ!Repeater 3000 AX is an expansion option if you already have a compatible FRITZ!Box mesh base.
- FRITZ! lists tri-band Wi-Fi, two gigabit LAN ports and compatibility with other routers.
- The integrated FRITZ! mesh functionality described relies on a FRITZ! setup. The repeater on its own isn’t a standalone system with a router and several units.
Mesh Wi-Fi products at Joybuy
Compare these mesh systems and expansion options for better coverage in your room or across several rooms. Before buying, check that the specific model sold in the Netherlands has the correct CE marking: the Rijksinspectie Digitale Infrastructuur states that equipment sold in Europe must meet the applicable requirements and carry the CE marking.
Image unavailable
TP-Link Deco BE68 (2-pack)
Worth comparing if you’re looking for a mesh system with two units and both wired and wireless backhaul.
Wi-Fi 7 and tri-band. Per unit: 10 Gbps, 2.5 Gbps and 1 Gbps WAN/LAN ports.
View at Joybuy
Image unavailable
TP-Link Deco PX10, dual-band Wi-Fi 6
Worth comparing if you want to use your existing electrical wiring for a Powerline network connection.
Wi-Fi 6; Powerline networking support; three gigabit ports per unit; router and access point modes.
View at Joybuy
Image unavailable
TP-Link Deco X50 (3-pack)
Worth comparing if you want to cover several rooms and can connect the mesh units with an Ethernet cable.
Dual-band Wi-Fi 6; three units; three gigabit ports per unit; optional Ethernet backhaul.
View at Joybuy
Image unavailable
Linksys Velop Pro 7, tri-band Wi-Fi 7
Worth comparing if you’re looking for a tri-band Wi-Fi 7 mesh system and may want to expand it with compatible Linksys Cognitive Mesh devices.
The product information lists the 2.4, 5 and 6 GHz frequency bands.
View at Joybuy
Image unavailable
ASUS ZenWiFi BT10 (2-pack), tri-band Wi-Fi 7
Worth comparing if you want to consider a mesh system with two units and a tri-band setup.
Wi-Fi 7; 2.4, 5 and 6 GHz bands; the product information lists Ethernet ports and MU-MIMO.
View at Joybuy
Frequently asked questions
When won’t mesh help with a slow game update?
If repeated tests using a computer connected by an Ethernet cable already show that your internet speed is too low, check your broadband connection first or speak to your provider. Mesh can’t increase the speed of the internet connection supplied to you.
Where should you place the mesh units?
Place an extra unit somewhere it can still get a usable connection to the rest of the network, rather than simply putting it where the Wi-Fi is weakest. If you can connect your Deco units by cable, follow the connection instructions for the mode you’ve chosen and check in the app which backhaul is active.
Do you need a permit or registration for ordinary home Wi-Fi in the Netherlands?
According to the Rijksinspectie Digitale Infrastructuur, Wi-Fi in the Netherlands uses licence-exempt frequencies, so you don’t need a permit, notification or registration. The conditions for using the equipment still apply.
What should you know about CE marking and the warranty?
Equipment sold in the Netherlands must meet the applicable European requirements and carry the correct CE marking, according to the Rijksinspectie Digitale Infrastructuur. For a consumer purchase, the Dutch government says you’re entitled to a product that works as it should. There’s no fixed period for the legal guarantee, and if something goes wrong, the retailer is your point of contact. A manufacturer’s warranty is an additional benefit.