Who is this for?

Household with a TV outside Wi-Fi range

If walls, another floor or the distance from your router weaken the signal at your TV, coverage where you watch is an important factor when choosing. The Consumers’ Association discusses coverage and placement as things to consider when extending your Wi-Fi.

Family with several people using the internet at once

If other people are using phones, laptops or streaming services while you watch a film, look beyond the advertised top speed and assess the connection where your devices are used. The Consumers’ Association tests Wi-Fi extenders with different devices.

Buyer who wants to find the cause first

If you’re not sure whether the problem is your provider’s connection, router placement or the connection near your TV, compare a wired speed test with one taken where you watch. Netflix has its own speed recommendation for a single 4K stream; this doesn’t tell you how much speed your whole household needs.

What should you look for when choosing?

First, test your internet connection over a cable, then check the signal at your TV. This will help you work out whether you mainly need to improve coverage or investigate the connection itself.

What to consider What should you look for? Who is this important for?
Coverage at the TV Test the connection where you watch and work out how many units you need and where to place them. Bear walls and floors in mind. If your TV is in another room, you’ll want to know whether the signal there is usable. Around 36% of consumers put coverage where they watch first.
Using the connection at the same time Assess the connection in several places and check the link between the mesh units; an advertised Wi-Fi speed won’t predict the results in your home. If other people are online while you’re watching a film, you’ll want the connection to remain usable in different places. Around 29% of consumers give simultaneous use top priority.
Internet speed and picture quality Ideally, test your connection over a cable, then check the speed at your streaming device. Netflix recommends 15 Mbps or more for one 4K stream; this isn’t a speed requirement for the whole household. To find out whether your connection can handle the film quality you want, first check your speed and what your service and device can support. Around 21% of consumers put connection speed or picture quality first.
Cost, installation and ports Check how many units are included, the cable route and how many ports will be free once you’ve connected your modem, TV and any backhaul. If you want the installation and connections to suit your needs, you’ll want to know what you actually need. Around 14% of consumers give purchase and setup top priority.

Common buying pitfalls

  • Buying a mesh system to fix a slow internet connection

    Mesh distributes your existing connection around your home, but it doesn’t increase the speed supplied by your provider. If the connection itself is slow, your film may still buffer after you extend your Wi-Fi.

    First, test the connection over a cable and compare it with the speed where you watch.

  • Assuming advertised Wi-Fi speed or coverage reflects performance in your home

    Walls, ceilings, the placement of the units and connected devices all affect your connection. So, a specification won’t tell you what speed you’ll get at your TV.

    Check the signal where you plan to watch, how many units you need and how they’ll connect to each other.

  • Assuming Wi-Fi 7 or tri-band is automatically a necessary upgrade

    A higher Wi-Fi version number doesn’t, by itself, prove that films will stream better at home. The Consumers’ Association says Wi-Fi 6 is generally the better-value option for most consumers.

    Choose based on your cabling options, devices and how many people use the connection at once. For extra features, also check the terms for any ongoing use.

Brands to consider

TP-Link

The Deco X50 range is an example of dual-band Wi-Fi 6 mesh with expandable coverage.

  • TP-Link lists three gigabit ports per unit for the Deco X50, plus optional Ethernet backhaul.
  • Check that you’re choosing the X50, not another version such as the X50-PoE or X50-Outdoor. The listed specifications don’t predict the measured speed in your home.

ASUS

The ZenWiFi BD4 is a dual-band Wi-Fi 7 mesh system with AiMesh.

  • ASUS lists two 2.5G ports per unit and the option of wired backhaul.
  • The Consumers’ Association says Wi-Fi 6 is generally the better-value option for most consumers. So, check that the version and ports suit your setup rather than choosing Wi-Fi 7 based on the version number alone.

NETGEAR

The Orbi RBK763S is an example of a tri-band Wi-Fi 6 set with a router and two satellites.

  • NETGEAR describes a dedicated connection between the router and satellites, and says Armor is included for a set period.
  • Product claims aren’t a measurement of performance in your home. Check the exact version, applicable CE marking and terms for any ongoing use.

Joybuy products

This selection features TP-Link Deco mesh systems with multiple units, including versions with Wi-Fi 6, Wi-Fi 6E or Wi-Fi 7, and models with wired connectivity options. Before buying, check the exact version and CE marking. The Dutch Authority for Digital Infrastructure states that wireless equipment sold in the Netherlands must meet the applicable European requirements.

TP-Link Deco BE68 mesh system, 2-pack

TP-Link Deco BE68, 2-pack

This 2-pack is worth considering if you want to compare a two-unit mesh system with wired connections.

The product description lists tri-band Wi-Fi 7, wired or wireless backhaul, and 10, 2.5 and 1 Gbps Ethernet ports.

View at Joybuy
TP-Link Deco X50 mesh system, 3-pack

TP-Link Deco X50, 3-pack

This three-unit set is worth considering if you want to extend Wi-Fi coverage to several places in your home.

The product information lists dual-band Wi-Fi 6, three gigabit ports per unit and optional Ethernet backhaul.

View at Joybuy
TP-Link Deco XE75 Pro mesh system, 3-pack

TP-Link Deco XE75 Pro, 3-pack

This 3-pack is worth considering if you want to compare a multi-unit mesh system with Ethernet ports on each unit.

The product information lists tri-band Wi-Fi 6E and three Ethernet ports per unit.

View at Joybuy
TP-Link Deco XE75 mesh Wi-Fi system

TP-Link Deco XE75, tri-band Wi-Fi 6E

This mesh Wi-Fi system is worth considering if you want to compare Wi-Fi 6E and wired connections.

The product information lists 2.4, 5 and 6GHz bands, three units and three gigabit ports per unit.

View at Joybuy
TP-Link Deco X50-PoE mesh system, 3-pack

TP-Link Deco X50-PoE, 3-pack

This three-unit set is worth considering if you want to connect the units using PoE cables.

The product information lists dual-band Wi-Fi 6, PoE support and two Ethernet ports per unit.

View at Joybuy

Frequently asked questions

How can you tell whether mesh Wi-Fi will stop your film buffering?

First, compare a wired test of your internet connection with one taken where you watch. If the wired speed is also low, look into your connection with your provider. If the signal is particularly weak at your TV, consider your router placement or adding Wi-Fi units.

What speed does a 4K film need?

Netflix recommends a stable connection of 15 Mbps or higher for one 4K stream. This isn’t a fixed threshold for every streaming service or an entire household, as other activities happening at the same time also use the connection.

Where should you place the extra mesh units?

Don’t put a wireless unit somewhere it can barely receive a signal itself. Check the signal between your router and the place where you watch; walls and ceilings can weaken it. If you have a suitable cable route, you could compare wired backhaul.

Can you use your own mesh router with your internet provider?

According to ACM ConsuWijzer, you have the freedom to choose your router, but your own device connected directly to your provider’s network must meet the applicable connection and safety requirements. If you’re unsure, ask your provider for the necessary settings. A mesh system connected behind an existing modem is a different setup; check that both devices will work together properly.

Do you need Wi-Fi 7 to stream a nature documentary while other people are online?

Not necessarily. First, work out whether the problem is the signal at your TV, your internet connection or several people using it at once. Then compare the Wi-Fi generation, the connection between the units and the ports with your devices and cabling options; the Wi-Fi generation alone won’t guarantee a better experience at home.