Who could benefit from mesh Wi-Fi?

Households with weak Wi-Fi in other rooms

You stream and make video calls in different parts of your home, and want to know how many well-positioned Wi-Fi nodes you’ll need. The Consumers’ Association (Consumentenbond) recommends taking obstacles and the distance between nodes into account.

Households with people streaming and calling at the same time

You want to distinguish your internet speed from the Wi-Fi speed quoted on the box, paying particular attention to the upload speed needed for calls. Netflix and Zoom each specify connection speeds for their particular video services.

Households with Ethernet between rooms

You can connect Wi-Fi nodes by cable and want to know whether a system has the right connections and supports Ethernet backhaul. TP-Link describes this option for the Deco X50.

What should you look for when choosing?

Several factors can matter when choosing mesh Wi-Fi for streaming and video calls at the same time. The table links each percentage to the main concern when buying.

What to consider What should you check? Who should pay particular attention?
Coverage and number of Wi-Fi nodes Identify the rooms where the signal is weak and test different positions. The Consumers’ Association recommends minimising obstacles and, ideally, having no more than two rooms between nodes. I mainly want usable Wi-Fi by the TV and where I make calls, without buying extra nodes unnecessarily. Around 36% of consumers prioritise coverage and the number of Wi-Fi nodes.
Streaming and video calls at the same time Check your connection while using both at once. Netflix recommends a download speed of 15 Mbps or more for its 4K streams; Zoom specifies 2,6 Mbps upload and 1,8 Mbps download for 720p group video. These figures are specific to those services and don’t guarantee how a mesh system will perform. I want to know whether the connection can handle both activities, including the video call’s upload requirements. Around 29% of consumers prioritise performance when using both at the same time.
Connection between Wi-Fi nodes Check whether Ethernet backhaul is supported by the specific version and whether the nodes have suitable Ethernet ports. If you can’t run a cable, a tri-band model may be an option, but that doesn’t guarantee an advantage in every home. If there are already cables between rooms, I want to know whether I can use them. If there’s no cable route, I’ll consider the wireless connection too. Around 21% of consumers prioritise the connection between nodes.
Cost, management and existing equipment Compare what’s included in the complete system, its power consumption and any paid features. Also check which router or access point set-up will work with your provider’s router. I don’t want to choose nodes or features I don’t need, and I want to know in advance how the system will connect to my existing network. Around 14% of consumers prioritise cost and management.

Common pitfalls

  • Assuming the Wi-Fi speed on the box is what you’ll get at home

    A Wi-Fi rating or combined radio speed doesn’t tell you how well your stream and video call will work around your home. Your broadband connection, upload speed and node positions all play a part too.

    Test your connection while using both services at once and compare it with the requirements of the services you use.

  • Placing a wireless node where there’s barely any signal left

    An extra node still needs a usable connection to the rest of the network. If it’s poorly positioned, the problem may remain.

    Try a spot with fewer obstacles and use the placement guide. If your home allows it, check whether Ethernet backhaul is supported by the version you’ve chosen.

  • Assuming every node has an Ethernet port

    According to eero, the eero 6+ router has two gigabit ports, while the standalone 6+ Extender has no Ethernet ports.

    Check the connections on every component before planning a wired set-up. A Wi-Fi-only extender won’t suit a plan that requires that node to be connected by cable.

  • Automatically choosing a three-node system

    The Consumers’ Association says two nodes are enough for most homes. An extra node isn’t automatically necessary and uses electricity.

    Choose the number of nodes based on the rooms and floors with weak coverage, and check whether you can add more later.

Brands to compare

TP-Link

The Deco X50 is worth considering if you want to compare Wi-Fi 6, gigabit ports and optional Ethernet backhaul.

  • TP-Link lists three gigabit ports per X50 node and support for Ethernet backhaul.
  • The stated coverage and radio speed aren’t measurements taken in your home. Check the system size and hardware version.

FRITZ!

The Mesh Set 1600 is an option to compare if you’re looking for a system with three Wi-Fi 6 nodes, including for use alongside an existing router or ONT.

  • FRITZ! lists three Repeater 1200 AX nodes, one gigabit LAN connection per node and a five-year manufacturer’s warranty for the system.
  • Consider whether you need three nodes. A manufacturer’s warranty doesn’t replace your statutory rights in the Netherlands.

ASUS

The ZenWiFi XT9 is a tri-band Wi-Fi 6 option to compare if running a cable isn’t practical.

  • ASUS lists two 5GHz bands, one 2,5GbE WAN port and three gigabit LAN ports for this version.
  • Check that the system on offer matches the version you’re looking for. An extra wireless band doesn’t guarantee better video calls in your home.

eero

The eero 6+ shows why you should check the router’s connections separately from those of a Wi-Fi-only extender.

  • According to eero, the 6+ router has two gigabit ports.
  • The standalone 6+ Extender has no Ethernet ports. Also check that the version on offer suits your connection.

Netgear

The Orbi RBK853 is a three-piece Wi-Fi 6 system to consider when comparing connections and the wireless link between nodes.

  • The Consumers’ Association lists a guest network, five Ethernet ports and a separate private Wi-Fi band for backhaul for this version.
  • These features alone don’t show that this model performs better than the other systems mentioned.

Joybuy products

This selection focuses on Wi-Fi 6 mesh for multiple rooms, with dual-band and tri-band models, different numbers of nodes and versions with PoE.

TP-Link Deco X50 Wi-Fi 6 mesh system, 3-pack

TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6

An option to compare if you’re looking at dual-band mesh to cover several rooms and can use Ethernet between nodes.

The product name specifies Wi-Fi 6 and a 3-pack. TP-Link lists three gigabit ports per Deco X50 node and optional Ethernet backhaul; check the hardware version.

Joybuy
TP-Link Deco XE75 Pro tri-band Wi-Fi 6E mesh system, 3-pack

TP-Link Deco XE75 Pro (3-pack), tri-band Wi-Fi 6E

An option to compare if you need Wi-Fi in several places and are considering an extra wireless band.

The product name specifies three frequency bands: 2,4, 5 and 6 GHz, and Wi-Fi 6E. The product information lists three Ethernet ports per unit.

Joybuy
TP-Link Deco XE75 tri-band Wi-Fi 6E mesh system

TP-Link Deco XE75, tri-band Wi-Fi 6E

An option to compare if running cables isn’t practical and you’re considering a tri-band set-up.

The product name specifies the 2,4, 5 and 6 GHz bands and Wi-Fi 6E. The product information lists a mesh system with three units.

Joybuy
TP-Link Deco X50-PoE Wi-Fi 6 mesh system, 3-pack

TP-Link Deco X50-PoE (3-pack), dual-band Wi-Fi 6

An option to consider if you want to compare a dual-band mesh system with PoE for use in several locations.

The product name specifies Wi-Fi 6, PoE and two Ethernet ports per unit.

Joybuy
TP-Link Deco X50 Wi-Fi 6 mesh system, 2-pack

TP-Link Deco X50 (2-pack), dual-band Wi-Fi 6

A smaller system to compare if you need Wi-Fi in several places and two nodes may be enough.

The product name specifies a 2-pack, dual-band and Wi-Fi 6.

Joybuy

Frequently asked questions

When won’t mesh fix buffering or dropouts?

If your connection is still poor next to the router or over a cable, check your broadband connection first. Netflix recommends a minimum download speed of 15 Mbps for its own 4K streams; Zoom specifies 2,6 Mbps upload and 1,8 Mbps download for 720p group video. These figures are for those services and don’t guarantee that buying mesh will fix buffering or dropouts.

Where should you place a wireless mesh node?

Don’t wait until you reach a spot where there’s virtually no signal before placing a node. The Consumers’ Association recommends minimising obstacles and, ideally, having no more than two rooms between nodes. Then check the connection where you stream or make calls.

How many Wi-Fi nodes do you need?

Start with the rooms and floors where coverage is weak. The Consumers’ Association says two nodes are enough for most homes; this is a guide, not a guarantee for every home.

Can you use your own router in the Netherlands?

Yes. The Netherlands Authority for Consumers and Markets’ ConsuWijzer service explains that you have the right to choose your router. There may be conditions for using your own modem: a provider may refuse an unsafe or unsuitable device and must make the necessary connection settings available. This doesn’t mean that every mesh system is a suitable replacement modem.

What if a Wi-Fi node breaks sooner than you could reasonably expect?

In the Netherlands, statutory rights apply alongside any manufacturer’s or seller’s warranty. According to the Netherlands Authority for Consumers and Markets’ ConsuWijzer service, the seller must resolve a fault free of charge if a product breaks too soon under normal use. There isn’t one fixed statutory warranty period for all products.