Who is mesh Wi-Fi suitable for when streaming and making video calls?

A household with simultaneous calls and films

You want to be able to make a clear video call somewhere else while watching TV. Check the signal in both locations, along with the available download and upload speeds.

Someone with a weak signal in several rooms

Your film or call tends to stutter when you’re further from the router. In that case, where you position the mesh points and how well they connect are important considerations.

A buyer who wants to keep their existing network

You want to extend your network where needed or use mesh with your current equipment, without replacing the whole setup unnecessarily. ACM ConsuWijzer explains that you can choose your own router equipment; just check that the new equipment will work with your existing network.

What should you look for when choosing mesh Wi-Fi?

First work out where the connection is struggling and whether network cables are available. Then choose the right type of mesh setup.

Mesh with Ethernet backhaul

Choose this if: you have network cables running to your TV or workspace.

Bear in mind: check the ports and whether the model supports Ethernet backhaul.

Wireless mesh

Choose this if: several areas have poor reception and you can’t run a cable between the points.

Bear in mind: place each point where it can still get a good signal; walls and distance make a difference.

Extending your existing network

Choose this if: your current router is compatible and you mainly want to improve coverage in one hard-to-reach area.

Bear in mind: the mesh features and controls need to work with your existing equipment.

Check your connection or positioning first

Choose this if: speeds are also poor close to the router or over a cable, or only one device is having problems.

The trade-off: you put off buying anything and first investigate whether the cause is your device, connection, package or provider.

What to consider What should you check? Who is this important for?
Stable video calls Measure download and upload speeds at your workspace. Zoom recommends 2.6 Mbps upload and 1.8 Mbps download for a 720p group call; these are requirements for the application, not specifications for a mesh system. If I need to make a video call while watching a film, I mainly want my call to stay stable. Around 31% of consumers say call stability is their top priority.
Coverage by the TV and workspace Compare the signal in both areas with the signal next to the router, and work out where an extra point could go. Netflix recommends 15 Mbps or more for a single 4K stream; this doesn’t guarantee good coverage throughout your home. When the TV and workspace are in different rooms, I want a usable signal in both places. Around 31% of consumers put coverage first.
Simultaneous network use Check whether the bottleneck is download speed, upload speed or Wi-Fi reception, and which applications are being used at the same time. Only add together application requirements if those applications are actually running simultaneously. If I’m watching a film and making a video call at the same time, I want to know whether my connection can handle both. Around 23% of consumers say handling simultaneous use is their top priority.
Compatibility with your current network Check whether you’re buying a complete router set or an additional point, which ports are available and whether the system works with your existing router. If you want to keep your current router and change as little as possible, look for an easy way to extend your setup. Around 15% of consumers say this is their top priority.

Common buying mistakes with mesh Wi-Fi

  • Confusing advertised Wi-Fi speed with internet speed by the TV

    A manufacturer’s stated wireless speeds aren’t the same as your internet connection speed or the signal in a particular spot.

    Before choosing a mesh set, measure download and upload speeds by the router, TV and workspace.

  • Putting a wireless point somewhere it can barely receive a signal

    An extra point won’t automatically improve coverage if its connection to the rest of the network is weak.

    Place the point where it can still get a good connection. Use any existing Ethernet cabling if your chosen model supports wired backhaul.

    Finding a suitable location may mean planning a cable route or placing the point somewhere else.

  • Mistaking an additional point for a complete router set

    A FRITZ!Repeater extends an existing setup. According to eero, the eero 6+ Extender doesn’t have an Ethernet port.

    Check the role and available ports of every component in the exact set you’re considering.

    Some setups need a suitable main unit as well as an additional point.

  • Comparing only the manufacturer’s warranty

    In the Netherlands, statutory consumer rights are separate from any limited manufacturer’s warranty. ACM ConsuWijzer states that the retailer is responsible for providing an appropriate free remedy if a product is faulty despite being used normally.

    If a product develops a fault, ask the retailer about your statutory rights first, and also check the terms of any manufacturer’s warranty.

Mesh Wi-Fi brands to consider

TP-Link

The Deco range includes wired and wireless mesh setups, with a choice of bands and connectivity options.

  • TP-Link lists two 2.5Gbps ports per point and PoE for the Deco X50-PoE V2. The Deco XE75 uses the 2.4, 5 and 6 GHz bands.
  • These are manufacturer specifications, not measurements taken in your home. Check the exact version and number of points.

ASUS

The ZenWiFi XD5 is a dual-band Wi-Fi 6 mesh system that can use wired backhaul when Ethernet ports are available.

  • ASUS describes the set mentioned here as having three points. It supports Ethernet backhaul in a suitable wired setup.
  • The manufacturer notes that 160 MHz use may be restricted in some regions and that compatible devices are needed for Wi-Fi 6 features. Stated coverage is not a performance guarantee.

FRITZ!

The FRITZ!Repeater 3000 AX is an additional point for anyone who wants to keep their existing router.

  • FRITZ! lists three radio units, two gigabit ports and a LAN bridge.
  • It isn’t a complete standalone router set. Mesh integration and controls also depend on your existing equipment.

eero

The eero 6+ is a dual-band Wi-Fi 6 router. According to eero, its router points can also connect to one another via Ethernet.

  • According to eero, an eero 6+ router has two gigabit ports.
  • The separately described eero 6+ Extender doesn’t have an Ethernet port. Check which version and components are included in the set you choose.

Joybuy mesh Wi-Fi products

These mesh products are designed for anyone looking to build Wi-Fi coverage in several areas. Check the CE marking, number of points, available ports and backhaul for the exact model, and make sure they suit your home.

TP-Link Deco E4 (3-pack), dual-band Wi-Fi 5

TP-Link Deco E4 (3-pack)

Suitable if you want mesh coverage in several areas and need wired connections.

Dual-band Wi-Fi 5 (802.11ac); two Ethernet ports per device, with wired connections of up to 100 Mbps.

View at Joybuy
ASUS ZenWiFi BT8 (2-pack), tri-band Wi-Fi 7

ASUS ZenWiFi BT8 (2-pack)

Suitable if you’re looking for two mesh points with three Wi-Fi bands.

Tri-band Wi-Fi 7 (802.11be), with bands at 2.4, 5 and 6 GHz; the product description lists AiMesh compatibility.

View at Joybuy
TP-Link AX1800 Whole Home Mesh Wi-Fi 6 (2-pack)

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 (2-pack)

Suitable if you want two mesh points and the option to use Ethernet backhaul.

Wi-Fi 6; the product description lists support for Ethernet backhaul.

View at Joybuy
TP-Link Deco X50-PoE (2-pack), dual-band Wi-Fi 6

TP-Link Deco X50-PoE (2-pack)

Suitable if you want to make use of PoE power or wired connections in your mesh setup.

Dual-band Wi-Fi 6 (802.11ax); PoE support and two Ethernet ports per point.

View at Joybuy
TP-Link Deco XE75 (3-pack), tri-band Wi-Fi 6E

TP-Link Deco XE75 (3-pack)

Suitable if you’re looking for tri-band mesh with three points.

Wi-Fi 6E with bands at 2.4, 5 and 6 GHz; three Ethernet ports per point.

View at Joybuy

Frequently asked questions about mesh Wi-Fi for streaming and video calls

How can you tell whether mesh will stop the interruptions?

Compare the connection by the router with measurements by the TV and workspace, and check both download and upload speeds during normal use. If speeds are already poor by the router, first investigate your device, connection, package or provider. Better coverage won’t increase the speed of your broadband package.

Where should you place extra points, and when should you use a cable?

Place a wireless point where it can still connect well to the network, not just in the area with no reception. If you have Ethernet running to that room, check whether your chosen model supports wired backhaul; manufacturers describe this as a way to reduce the load on the wireless connection between points.

Do you need to replace your Dutch provider’s router?

No, not necessarily. ACM ConsuWijzer explains that you can choose your own router equipment. For your setup, check whether the mesh set can work as a router, access point or compatible extension alongside your existing equipment.

What warranty applies if a mesh point develops a fault too soon?

In the Netherlands, statutory consumer rights apply alongside any manufacturer’s warranty. ACM ConsuWijzer states that if a product is faulty despite being used normally, the retailer is responsible for providing an appropriate free remedy. Statutory rights aren’t automatically limited to the stated manufacturer’s warranty period.

Which legal product requirement is relevant when buying in the Netherlands?

Mesh Wi-Fi is radio equipment. According to the Dutch Authority for Digital Infrastructure, radio equipment placed on the Dutch market must meet the applicable requirements and carry a CE marking. Check this for the exact model being offered.