Who is this choice for?

Watching films on another floor

Your main priority is to stop the stream from buffering on your TV or viewing device. The connection between mesh points and the speed in that location are important things to consider.

A home without network cabling between floors

You can’t run a cable to the next mesh point, so you’ll need to choose carefully where to place the wireless points so they can still connect reliably.

A household with several screens

You want to keep watching while other devices use the network. Compare the capabilities of the system and the connection between its points, rather than focusing only on the biggest number on the box.

What should you look for when choosing?

Mesh with a wired connection

Choose this when: there is a suitable network cable between floors, or you can install one – especially if the wireless connection between the planned points is weak.

The trade-off: the connection between points won’t rely on a wireless hop, but you will need a cable, suitable ports and the right network settings. TP-Link says Deco installations can combine wired and wireless connections; port requirements may vary by mode.

Fully wireless mesh

Choose this when: running cables isn’t practical and you can find spots where the mesh points connect well to each other.

The trade-off: you avoid the hassle of cabling, but the connection still depends on distance, obstacles and placement. A quoted coverage area doesn’t guarantee coverage in every home.

Check your existing connection first

Choose this when: you’re not sure whether buffering is caused by your internet connection, router position or weak Wi-Fi near the TV.

The trade-off: testing your connection and possibly moving the router takes time, but could help you avoid an unnecessary purchase. A faster mesh system won’t increase the speed of your internet package.

What to consider What to look for when buying Who should prioritise this?
Connection between floors Check whether wired backhaul is possible, which ethernet ports are available and where a cable could run. I want the stream to stay stable on the floor where I watch, so I’m focusing on the connection between points; around 40% of consumers prioritise the connection between floors.
Placement without cables Try possible locations and check whether the management app shows the connection for each mesh point. If I can’t run a cable between floors, I want to know where the wireless points can still reach each other; around 30% of consumers give cable-free placement top priority.
Several devices at once Compare the specifications of the exact system with your devices, and check how the points connect to each other. I want others to be able to use the network while a film is playing, so I’m comparing systems for that use; around 20% of consumers prioritise using the network on several devices at once.
Cost and number of units First decide where the points can go and whether moving your router could already improve the connection. I don’t want to buy more points or features than my viewing areas need; around 10% of consumers prioritise keeping the purchase cost down.

Avoiding common buying mistakes

  • Assuming a quoted coverage area guarantees coverage on every floor

    The connection between mesh points and the layout of your home both affect coverage where you watch.

    Check the connection in the locations you have in mind before settling on the number of points.

  • Confusing high Wi-Fi speed with internet speed on your TV

    Your provider’s internet connection and the Wi-Fi where you watch are separate parts of the connection to your stream.

    Test both where possible and compare the results with the requirements of your streaming service.

  • Assuming every version in a product range has the same connections

    Versions with similar model names can differ. For example, TP-Link lists specific connection options for the Dutch Deco X50-PoE V2 that you shouldn’t assume apply to every X50 or retailer listing.

    Before buying, check the full model and version number, what’s included in the set and the available connections.

Brands to consider

TP-Link

The Deco range includes models such as the X50 and the separate X50-PoE version.

  • For the Dutch Deco X50-PoE V2, TP-Link lists PoE and two 2.5Gbps ports.
  • Check the exact version and what’s included; these specifications don’t automatically apply to every X50 listing.

FRITZ!

The FRITZ!Mesh Set 4200 is available as a three-piece set with three FRITZ!Repeaters 3000 AX.

  • FRITZ! lists Wi-Fi 6, tri-band, compatibility with an existing router and automatic updates.
  • Its suitability for larger homes doesn’t guarantee measured coverage across the floors of your home.

ASUS

The ZenWiFi BT8 is a tri-band mesh system with Wi-Fi 7. It’s worth comparing for features such as expandability and connectivity.

  • ASUS lists two 2.5Gbps ports and wired backhaul.
  • Advertised speed and coverage don’t prove what streaming speed you’ll get at home; first decide whether you need the extra features.

NETGEAR

The Consumers’ Association describes the Orbi RBE373 version as a three-point system.

  • According to the product information on the Consumers’ Association page, this version has Wi-Fi 7 and a guest network.
  • The same product information says parental controls aren’t included; this doesn’t provide a performance comparison with other systems.

Joybuy products for mesh Wi-Fi

This selection includes mesh systems with two or three points for placement in different parts of your home. The Wi-Fi version alone doesn’t guarantee results on another floor. Also check the connection between the points and whether the supplied device carries the required CE marking, as prescribed by the Dutch Authority for Digital Infrastructure.

TP-Link Deco E4, 3-pack, dual-band Wi-Fi 5

TP-Link Deco E4 (3-pack)

A three-point set could suit you if you want to cover several locations across different floors; placement and the connection between points remain key.

Dual-band Wi-Fi 5 (2.4 GHz and 5 GHz).

View at Joybuy
TP-Link Deco M4, 3-pack, dual-band Wi-Fi 5

TP-Link Deco M4 (3-pack)

Three points give you several placement options; check that they can connect reliably to each other in the locations you choose.

Dual-band Wi-Fi 5 (2.4 GHz and 5 GHz).

View at Joybuy
TP-Link Deco X50, 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack)

A three-point set is an option if you want to place mesh points in several parts of your home; decide in advance where the points will be able to reach each other.

Dual-band Wi-Fi 6 (2.4 GHz and 5 GHz).

View at Joybuy
TP-Link Deco X50-PoE, 2-pack, dual-band Wi-Fi 6

TP-Link Deco X50-PoE (2-pack)

This two-point set could suit you if you want to connect two locations and are considering PoE as an installation option; check the connections on the exact version.

Dual-band Wi-Fi 6 (2.4 GHz and 5 GHz) and PoE.

View at Joybuy
TP-Link Deco S7, 3-pack, dual-band Wi-Fi 5

TP-Link Deco S7 (3-pack)

Three points give you several locations to consider; check the connection between them before choosing the set for a viewing area on another floor.

Dual-band Wi-Fi 5 (2.4 GHz and 5 GHz).

View at Joybuy

Frequently asked questions

How do I know whether I need mesh to watch a film upstairs?

First, compare the connection near your viewing device with the one near your internet connection. Netflix recommends a stable connection of at least 15 Mbps for its own 4K streams; this isn’t a general requirement for every film or streaming service. If possible, test the internet connection using a cable, so you don’t mistake a provider issue for weak Wi-Fi.

Where should I place the mesh points?

Place a wireless mesh point somewhere it can still connect well to the network, not just where the signal has already dropped out. For Deco, TP-Link recommends setting up through the app; the network map can then show how a satellite is connected. If you’re using cabling, follow the instructions for your chosen router or access point mode.

Is a manufacturer’s warranty the same as a statutory guarantee?

No. ACM ConsuWijzer explains that statutory consumer rights apply alongside any manufacturer’s or seller’s warranty. If a product breaks during normal use sooner than you could reasonably expect, contact the seller for a suitable solution at no extra cost.

Do I need a permit or registration for ordinary home Wi-Fi in the Netherlands?

No. The Dutch Authority for Digital Infrastructure says that Wi-Fi use covered by its permit-exempt rules does not require notification or registration. The Authority also states that equipment must carry the correct CE marking; check the specific device.