Mesh Wi-Fi can help if streaming stutters because Wi-Fi coverage is weak near your TV, but it won’t fix a slow internet connection or a problem with your streaming app. Choose a compact tabletop model if you have room for the device and its power supply. A PoE model mounted on a wall or ceiling can free up shelf space, provided the right cabling and power supply are available. Before you buy, check the exact version on offer and make sure the device has the CE marking.
Who is mesh Wi-Fi suitable for?
For viewers with patchy Wi-Fi on their TV
Your stream keeps stuttering, especially when you’re watching TV, and you want to check whether better Wi-Fi coverage would help more than a faster broadband package. Netflix’s Help Centre recommendation for a single UHD 4K stream can help you assess the connection where you watch.
For viewers with a small shelf
You’re looking for a mesh node that fits, with room for its power supply and cables. The dimensions of individual nodes, including the ASUS ZenWiFi BD4 and eero 6+, can help you measure up. You’ll also need to consider the space required for the whole setup.
For viewers who can run a cable
You can connect mesh nodes by cable, or you’re considering mounting a node on the wall or ceiling. TP-Link describes Ethernet backhaul for the Deco X50 and several mounting options for the separate X50-PoE range.
What should you look for?
Start by measuring the connection near your TV: mesh is most relevant when Wi-Fi coverage is weak, not when the limiting factor is your internet connection or streaming app.
| What to consider |
What to look for when buying |
Who should pay particular attention? |
| A stable picture where you watch |
Test the connection at your TV and check where the Wi-Fi signal gets weaker. Netflix recommends a stable connection of at least 15 Mbps for a single UHD 4K stream. This is Netflix’s recommendation, not a universal requirement for other services or multiple streams. |
If I mainly want to watch without interruptions, I first want to know whether the Wi-Fi near my TV is falling short or the internet connection is dropping out. Around 33% of consumers put uninterrupted streaming first. |
| Available shelf space |
Measure the space and allow for the dimensions of each node, its power supply and cables. Only then compare kits with different numbers of nodes. |
On a small shelf, I also want to leave room for the adapter and cables; the node’s dimensions alone aren’t enough. Around 27% of consumers put shelf space first. |
| Connection and mounting |
Check whether Ethernet backhaul is possible. The Deco X50-PoE requires IEEE 802.3at or IEEE 802.3bt for PoE; IEEE 802.3af is not sufficient. |
If I can run cables, I take the mounting location and the connection between nodes into account. Around 27% of consumers put cabling or mounting first. |
| What’s in the box and support |
Check how many nodes and power supplies are included in the version you’re buying, and which connections the node you’ve chosen has. Also check the terms for the version on offer. |
I want to know how many nodes and power supplies are included in the kit, and who to contact if a product is faulty. Around 13% of consumers put what’s in the box and support first. |
Common buying mistakes
-
Assuming a high Wi-Fi speed guarantees 4K streaming
A stated radio speed doesn’t tell you how fast the connection is near your TV. Mesh also won’t fix a problem with your internet connection or playback device.
First, test the connection near your TV and find out where it gets worse. Compare the result with the recommendation from the streaming service you use.
-
Choosing PoE without checking the power supply and cable route
According to TP-Link, the Deco X50-PoE supports IEEE 802.3at and 802.3bt, but not 802.3af. The power supply must also provide enough power.
Check the PoE standard, available power budget and cable route before you buy. TP-Link also lists the included DC adapter as a power option, but this means you won’t be powering the device over a single cable.
-
Confusing an eero 6+ Extender with a router node
According to eero, the eero 6+ Extender has no Ethernet ports, while the eero 6+ router has two. The Extender therefore isn’t suitable if you need Ethernet at that point for your TV or wired backhaul.
Check the exact type of each node, not just the product family.
Brands to consider
ASUS
The ZenWiFi BD4 is a tabletop model. ASUS lists the dimensions of each node and offers a version with two nodes. This can help if you want to measure up a small shelf before you buy.
- According to ASUS, each BD4 node has two automatically assigned 2.5G ports and supports router and access point modes.
- The stated radio speeds are specifications, not measured streaming speeds in your home. Check the kit contents too.
TP-Link
The Deco X50 offers optional Ethernet backhaul. The separate X50-PoE range can be mounted on a table, wall or ceiling; treat it as a different version.
- TP-Link specifies three gigabit ports per Deco X50 node. With the X50-PoE, PoE can give you more flexibility over where you place it, provided you have suitable power and cabling.
- The X50-PoE requires IEEE 802.3at or 802.3bt for PoE; IEEE 802.3af is not supported.
eero
The eero 6+ is worth considering if you’re looking for a low-profile tabletop model and can choose between a router node and a wireless Extender.
- eero lists the dimensions of both types as 99,4 × 97 × 65,8 mm.
- Only the eero 6+ router has Ethernet ports. The Extender isn’t a substitute if you need Ethernet at that location for a TV connection or wired backhaul.
NETGEAR
The Orbi RBK763S is an option if you’re considering a kit with a router and two satellites.
- NETGEAR lists a dedicated connection between the router and satellites and seven gigabit ports for this kit.
- These model-specific features don’t prove it will perform better in a small home, or solve the problem of limited shelf space.
Mesh Wi-Fi products at Joybuy
Joybuy’s mesh Wi-Fi selection includes kits with multiple nodes and options for Ethernet backhaul.
Image unavailable
TP-Link Deco BE68 (2-pack)
A two-node kit for anyone considering wired backhaul. Check that the connection and placement will work in your home.
View at Joybuy
Image unavailable
TP-Link Deco E4 (3-pack), dual-band Wi-Fi 5
A good fit if you’re looking for a mesh kit with three nodes. The Ethernet ports are rated for up to 100 Mbps per node, so bear that in mind if you need a faster wired connection.
View at Joybuy
Image unavailable
ASUS ZenWiFi BT8 tri-band Wi-Fi 7 (2-pack)
A two-node kit for anyone looking for a mesh setup with multiple bands. The stated dimensions of each node are 186 × 159 × 72 mm; measure the available space, allowing for the power supply and cables.
View at Joybuy
Image unavailable
ASUS ZenWiFi BD4 dual-band Wi-Fi 7 (2-pack)
Worth considering if you want to compare the dimensions of a tabletop model with your available shelf space. ASUS lists the BD4 as 140 × 70 × 140 mm per node; remember to allow for the power supply and cables too.
View at Joybuy
Image unavailable
TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System (2-pack)
A two-node kit for anyone considering Ethernet backhaul. Check that the exact version and available ports are right for the connection you want to set up.
View at Joybuy
Frequently asked questions
Do I automatically need Wi-Fi 7 to watch a 4K documentary?
No. The picture resolution you want doesn’t automatically mean you need Wi-Fi 7. Netflix recommends a stable connection of at least 15 Mbps for its own 4K streams. Test the connection near your TV and check whether Wi-Fi coverage or your internet connection is the limiting factor. This recommendation doesn’t predict how a particular mesh model will perform.
Can I wall-mount a Deco X50-PoE without a socket nearby?
Yes, if you can run a suitable Ethernet cable and provide IEEE 802.3at or 802.3bt PoE power at that location. TP-Link states that 802.3af isn’t supported. Powering it with the DC adapter is an alternative, but you’ll need a socket near the node.
What should I do if the documentary still stutters with mesh?
Check the network speed in the streaming app on your TV and compare it with the recommendation from that service. If the internet speed is lower than expected, your internet connection may be the limiting factor; don’t assume it’s just a Wi-Fi problem.
What about CE marking and the guarantee in the Netherlands?
Radio equipment must meet the applicable European product requirements and carry the correct CE marking. The Dutch Authority for Digital Infrastructure states that the marking must be on the equipment; check the version you actually receive. According to the Dutch government, there is a statutory guarantee with no fixed legal time limit, and the seller is your point of contact if a product is faulty.