What should you look for in mesh Wi-Fi?
The Consumers’ Association recommends positioning mesh nodes so they can reach one another with as few obstacles as possible. So first map out your work areas, then decide how many nodes you need, where to mount them and whether you’ll need cabling.
| What to consider |
What to look for |
Who should pay particular attention? |
| Coverage in work areas |
Check where the signal is weak and whether a node placed there can still connect reliably to the other nodes. |
If your group works in different rooms, you’ll want to know whether the nodes can reach one another along the route between them. Around 29% of consumers cite coverage throughout their work areas as their main purchasing concern. |
| Limited shelf space |
Check whether the units will fit on available surfaces or can be mounted on a wall or ceiling, and whether power and data connections are accessible there. |
If you don’t want to give up shelf space, focus on mounting options and cable routing. Around 29% of consumers say saving space is their main purchasing concern. |
| Working at the same time and cabling |
Count the devices you want to connect by cable and allow for ports for your modem, backhaul and end devices. |
If several project members will be using devices at the same time, you’ll want to know in advance which connections will remain available. Around 24% of consumers prioritise simultaneous use and wired connections. |
| Guest access and management |
Check the guest network features of the specific version and how you’ll manage firmware updates. |
If participants bring their own devices, separate access and straightforward management are important. Around 18% of consumers say guest access and management are their main purchasing concern. |
Joybuy products
This selection includes TP-Link Deco mesh systems for work areas in several rooms, with units designed to sit on a surface and a mountable PoE version. The Dutch Authority for Digital Infrastructure states that wireless equipment sold in the EU must carry a CE mark; check this for the specific version actually offered.
Image unavailable
TP-Link Deco BE68 (2-pack)
The two mesh units can be placed in different rooms where you work.
The product description lists Wi-Fi 7 and tri-band. Each unit is listed with three ports, including 10 Gbps and 2,5 Gbps ports; wired and wireless backhaul are also mentioned.
View at Joybuy
Image unavailable
TP-Link Deco X50 (3-pack)
The three units give you several placement options for spread-out work areas if you don’t want to mount them on walls or ceilings.
Wi-Fi 6; TP-Link lists three gigabit ports per unit and optional ethernet backhaul.
View at Joybuy
Image unavailable
TP-Link Deco XE75 Pro (3-pack)
This three-piece set provides mesh units you can place near work areas in different rooms.
The product description lists tri-band Wi-Fi 6E, two gigabit ports and one 2,5-gigabit port per unit. Guest access is listed as a feature.
View at Joybuy
Image unavailable
TP-Link Deco XE75 (3-pack)
The three mesh units can be placed near different work areas.
The product description lists tri-band Wi-Fi 6E, three gigabit ports per unit and guest access.
View at Joybuy
Image unavailable
TP-Link Deco X50-PoE (3-pack)
This version is a good fit for a setup where wall or ceiling mounting can free up shelf space.
Wi-Fi 6 and two ethernet ports per unit are listed. According to TP-Link, PoE power requires 802.3at or 802.3bt; 802.3af isn’t supported. TP-Link also lists a DC adapter as an alternative. Guest access is listed as a feature.
View at Joybuy
Frequently asked questions
Where should you place mesh nodes if a work area at the back of your home has poor coverage?
Don’t automatically place a wirelessly connected intermediate node in the spot with the weakest signal. The Consumers’ Association recommends choosing a position where the nodes can still reach one another, with as few obstacles as possible. This might be closer to the centre of your home.
Can a Deco X50-PoE work without a separate power cable?
Yes. According to TP-Link, the Deco X50-PoE can receive power and data through a single ethernet cable if the PoE power supply supports 802.3at or 802.3bt. TP-Link also lists a DC adapter as an alternative; 802.3af isn’t suitable for powering this model over PoE.
Can I use my own mesh router instead of the one from my internet provider?
In the Netherlands, router freedom is protected under ACM rules, but a provider may refuse a device, for example, if it doesn’t meet the applicable safety requirements. Ask for the connection settings if needed. Adding a mesh node behind your existing router is different from replacing your modem.
Do you need a permit or registration to use Wi-Fi at home in the Netherlands?
According to the Dutch Authority for Digital Infrastructure, no notification or registration is required for permit-free Wi-Fi use, provided you meet the applicable conditions of use. This doesn’t mean that every router complies with equipment regulations; check that the specific version of any wireless equipment sold in the EU carries a CE mark.
What should I check about the CE mark on a mesh system?
Check the CE mark on the specific version of the product being offered. The Dutch Authority for Digital Infrastructure states that wireless equipment sold in the EU must carry a CE mark; the model name on a product page alone doesn’t confirm which version will be supplied.