Who is this relevant for?

Designer experiencing slow uploads

If you work in a home office far from your router, it’s important to find out whether your internet connection or Wi-Fi is slowing down your design file uploads. The Dutch Consumers’ Association recommends measuring your internet speed using a wired connection.

Resident with a distant home office

If walls or a ceiling weaken the Wi-Fi signal, you’ll need to work out where to place extra network nodes and whether you can connect them with a cable. The Dutch Consumers’ Association and TP-Link Netherlands respectively explain why placement matters and the option of Ethernet backhaul.

Buyer with an existing provider modem

If you want to extend your coverage without replacing your modem straight away, check how the mesh system can connect to your existing equipment. ACM ConsuWijzer explains that you can choose your own router, while FRITZ! describes how to connect the Mesh Set 1700 to an existing router or modem.

What should you look for when choosing?

Improve your connection or setup first

Choose this when: the wired upload speed at your modem is already slow, or moving your router would give your home office enough coverage.

Worth noting: this could help you avoid an unnecessary mesh purchase, but it won’t solve every weak spot behind walls or ceilings.

Mesh with a wireless connection between nodes

Choose this when: your internet connection provides enough upload speed, the Wi-Fi in your home office is weak, and running a cable between the nodes isn’t practical.

Worth noting: placement and obstacles still matter. An extra node needs to have a usable connection to the network itself.

Mesh with wired backhaul

Choose this when: you can run an Ethernet cable between your router or modem and the distant mesh node, for example if there are several obstacles.

Worth noting: this setup requires a suitable cable route and compatible ports. Faster ports won’t automatically increase the speed of your internet package.

Priority What should you look for? Who is this most relevant for?
Reliable uploads Compare the wired upload speed at your modem with the Wi-Fi in your home office; check whether Ethernet ports and backhaul are suitable. I want to send design files reliably and first find out where the slowdown is occurring. Around 36% of consumers put upload speed first.
Wi-Fi coverage Check how many nodes are included in the system and whether there’s a suitable spot where each node can still connect. The signal drops out in my distant home office, behind walls or on another floor. I want to know how many nodes I need and where to put them. Around 29% of consumers prioritise coverage.
Compatibility with your existing network Check how the system connects, its operating modes and the Ethernet ports available. I want to keep my existing modem and cables, and know in advance how the mesh system will connect to them. Around 21% of consumers prioritise compatibility with their existing network.
Avoiding unnecessary spending Measure your upload speed first, then work out how many nodes you need and whether you’ll need any cabling. I don’t want to buy a mesh system or a more expensive internet package before I know what’s causing the slowdown. Around 14% of consumers want to avoid unnecessary spending on their network.

Common buying mistakes

  • Assuming a higher Wi-Fi rating means faster internet uploads

    Wi-Fi and your internet connection are separate parts of the journey. If the wired upload speed at your modem is already slow, extra Wi-Fi coverage won’t fix the problem.

    Before choosing mesh, measure your speed with an Ethernet cable connected to your modem and compare the result with the connection in your home office.

  • Putting an extra mesh node in a Wi-Fi dead zone

    A mesh node still needs to connect to the rest of your network; distance and obstacles affect that connection.

    Try a spot between your router and home office where the node can still get a usable signal, or find out whether wired backhaul is an option.

    An extra node also needs a suitable location and power socket; wired backhaul requires a suitable cable route.

  • Assuming a 2-pack, 3-pack or regional variant is the same product

    The number of nodes and the exact specification can vary, even when the model name looks similar.

    Check the full model and set name, what’s included and the applicable warranty. Also check that the correct CE marking is on the actual device.

    A set with a different number of nodes could change how you arrange your network.

Brands to consider

TP-Link

The Deco X50 is a Wi-Fi 6 mesh range available in 1-, 2- and 3-packs, making it worth considering if placement or future expansion matters to you.

  • TP-Link Netherlands lists three gigabit ports and optional Ethernet backhaul for the Deco X50.
  • The speeds and coverage area quoted by the manufacturer aren’t measured performance figures for your home office.

FRITZ!

The FRITZ!Mesh Set 1700 is worth considering if you want to keep your existing router or modem.

  • FRITZ! describes connecting to an existing router or modem via LAN. FRITZ! states that the Repeater 1700 comes with a five-year manufacturer’s warranty.
  • Check the exact set size and connection options for the model you’re considering.

ASUS

The ZenWiFi BD4 is a dual-band Wi-Fi 7 mesh system. ASUS also lists a 3-pack variant in its Dutch specifications.

  • ASUS specifies an access point mode and two 2.5Gbit/s WAN/LAN ports for the BD4.
  • Wi-Fi 7 and faster ports don’t in themselves prove that you’ll get faster uploads over the internet. Also check the exact packaging and regional variant.

Joybuy products for this situation

These mesh products are options to compare for a distant home office, with different set sizes and connection options. Check that the correct CE marking is on the actual device; the Dutch Authority for Digital Infrastructure states that it’s required for electrical and electronic equipment sold in the Netherlands.

ASUS ZenWiFi BD4 dual-band Wi-Fi 7

ASUS ZenWiFi BD4 dual-band Wi-Fi 7

Worth considering if you want to use a wired connection between mesh nodes; mesh won’t increase the upload speed of a slow internet connection.

The title lists Wi-Fi 7 (802.11be) and dual-band (2.4 GHz / 5 GHz). ASUS specifies an access point mode and two 2.5Gbit/s WAN/LAN ports for the BD4.

Joybuy
TP-Link Deco M4 mesh system, 3-pack

TP-Link Deco M4, 3-pack

A mesh system with three nodes to consider if you want to extend coverage across several rooms. Place the nodes where they can still connect to the network.

The title lists dual-band and Wi-Fi 5 (802.11ac). The product information lists two Ethernet ports per node.

Joybuy
TP-Link Deco X50 mesh system, 3-pack

TP-Link Deco X50, 3-pack

Worth considering if you want to use several mesh nodes and can set up wired backhaul; your upload speed will still depend on your internet connection.

The title lists dual-band and Wi-Fi 6 (802.11ax). TP-Link lists optional Ethernet backhaul for the Deco X50; the product information lists three gigabit ports per node.

Joybuy
Huawei eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router

Huawei eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router

Worth considering if you want to extend a mesh network; check that the connection method works with your existing equipment.

The product title lists dual-band and Wi-Fi 7.

Joybuy
TP-Link Deco X50-PoE mesh system, 2-pack

TP-Link Deco X50-PoE, 2-pack

Worth considering if two mesh nodes are enough and you’re looking at a wired PoE setup; check that the cable route and connections you need are suitable.

The title lists dual-band and Wi-Fi 6 (802.11ax). The product information lists PoE and two Ethernet ports per node.

Joybuy

Frequently asked questions

Can mesh help if a design file is slow to upload?

Only if your home network is the bottleneck. First, measure your speed using an Ethernet cable connected to your modem. If uploads are slow there too, look into your internet connection before buying mesh.

Where should I put an extra mesh node?

Choose a spot where the node can still connect well to the rest of your network, then test the connection in your home office. Distance, walls and ceilings affect the signal; where possible, compare this with a wired connection between the nodes too.

Do I have to replace my provider’s modem?

Not necessarily. ACM ConsuWijzer explains that you can choose your own router in the Netherlands; also check how your chosen mesh system connects to your existing equipment. For example, FRITZ! describes connecting the Mesh Set 1700 to an existing router or modem.

What warranty and cooling-off period apply to online purchases?

According to ACM ConsuWijzer, online consumer purchases generally come with a statutory 14-day cooling-off period from the day of delivery. The statutory guarantee is separate from any manufacturer’s warranty. If a product doesn’t do what you could reasonably expect under normal use, the seller must resolve the issue in line with the applicable rules.

Does a Wi-Fi router in the Netherlands need a CE marking?

Yes. The Dutch Authority for Digital Infrastructure states that electrical and electronic equipment, including Wi-Fi equipment, must carry the correct CE marking. Check the marking on the actual device; a product name or online shop description alone doesn’t prove that it’s there.