Who might benefit from mesh Wi-Fi?

Reader with a weak Wi-Fi signal where they read

Your downloads are particularly slow in a spot further from the router, and you want to know whether an extra node could help.

Resident with a narrow hallway

You want better coverage without having to awkwardly place a device or cable in the hallway. The connection between the mesh nodes matters too.

Reader who wants to keep their existing modem

You want to know whether a mesh setup will work alongside your existing router or modem before replacing any equipment.

What should you look for when choosing?

First, check the Wi-Fi signal where you read, then make sure an extra node can maintain a connection to the main node from there. Only then decide whether to connect wirelessly, use a supported cable connection or consider another solution specific to the model.

Consideration What should you check? Who is this important for?
Coverage where you read Check the signal where you download, and see whether the system shows a connection to the extra node. If magazines are slow to download mainly in one spot, I want to know whether an extra node will still have a good connection there. Around 36% of consumers put coverage where they read first.
Space for an extra node Check whether there’s a clear space and a power socket outside the narrowest part of the hallway, where the connection will remain usable. In a narrow hallway, I want to place a node without blocking the way and make sure it has a good connection to the router. Around 29% of consumers prioritise where they can place it.
Connection between nodes Check whether the exact kit supports Ethernet backhaul, and find out which ports and cable route you’ll need. If walls or the layout of the home make a wireless connection difficult, I want to know whether I can run a cable between the nodes. Around 21% of consumers prioritise this connection.
Kit size and existing modem Check the supported connection mode, how many nodes you need and how the chosen model receives updates. I don’t want to buy a bigger kit than I need, and I’d like to keep my existing modem if possible. Around 14% of consumers prioritise keeping costs down and retaining their equipment.

Common buying mistakes

  • Putting an extra node in the weak-signal area without checking its connection

    A wireless mesh node still needs a usable connection to the main node. So the spot where you want better Wi-Fi isn’t necessarily the best place for the extra node.

    Try a spot between the router and where you read, then check the connection in the management app. Use a wired connection if it’s suitable and practical for your chosen kit.

  • Assuming the advertised coverage or Wi-Fi speed is guaranteed in your home

    Manufacturer figures can’t predict how strong the Wi-Fi signal will be where you read. TP-Link also warns that adding more Deco nodes doesn’t always improve stability or throughput.

    Choose the number of nodes based on your home’s layout and the spots where you’ve actually checked and found a weak signal.

  • Assuming every mesh kit connects in the same way

    How you connect a system varies by model and operating mode. According to KPN, a rented KPN SuperWifi node only works with KPN Internet; this doesn’t automatically apply to a purchased node.

    Before buying, check the instructions for the exact version and make sure it’s compatible with your modem setup, the connections you need and any rental terms.

Brands to consider

TP-Link

Deco is an expandable mesh product range. The Deco X50 is a dual-band Wi-Fi 6 model; TP-Link lists the PX50 separately as an option that connects over power lines.

  • TP-Link lists three gigabit ports on each X50 unit.
  • Advertised wireless speeds and coverage aren’t a measure of performance in your home. The PX50 feature isn’t automatically available on other Deco models.

ASUS

AiMesh may be worth considering if you want to position an extra node carefully. The ZenWiFi BD4 is a specific dual-band Wi-Fi 7 kit.

  • ASUS lists two 2.5-gigabit ports for the BD4 and describes connection checks for AiMesh.
  • The ports alone don’t prove that magazines will download faster. Check support and the exact version of the kit you’re considering.

FRITZ!

The Mesh Set 1700 may be worth considering if you want to keep your existing router or modem.

  • FRITZ! describes the 2-piece version as connecting to a FRITZ!Box, another router or directly to a fibre modem/ONT. The manufacturer also describes automatic updates.
  • Information about the 2-piece version doesn’t confirm what’s included in a 3-pack.

KPN

SuperWifi nodes may be worth looking into if you already use a compatible KPN home network.

  • KPN offers installation and management support through MijnKPN.
  • According to KPN, a rented SuperWifi node only works with KPN Internet. Don’t assume a purchased node works in the same way as a rented one without checking.

Mesh Wi-Fi products at Joybuy

These multi-node mesh kits are for anyone looking to improve Wi-Fi where they read by positioning the nodes carefully. Before choosing, check the connection options and the connection between the nodes.

TP-Link Deco BE68 2-pack

TP-Link Deco BE68 2-pack

Suited to anyone looking for a two-node mesh setup and considering a wired connection. Check that the connection method works for your home.

Version: 2-pack.

View at Joybuy
TP-Link Deco E4 3-pack, dual-band Wi-Fi 5

TP-Link Deco E4 3-pack

Suited to anyone looking to place several mesh nodes. Choose the number based on the spots where you’ve actually checked and found a weak Wi-Fi signal.

Version: 3-pack, dual-band (2.4 GHz/5 GHz), Wi-Fi 5 (802.11ac).

View at Joybuy
TP-Link Deco M4 3-pack, dual-band Wi-Fi 5

TP-Link Deco M4 3-pack

Suited to anyone looking to arrange several nodes to suit their home’s layout. Once they’re in place, check whether the connection improves where you read.

Version: 3-pack, dual-band (2.4 GHz/5 GHz), Wi-Fi 5 (802.11ac).

View at Joybuy
TP-Link Deco X50 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50 3-pack

Suited to anyone considering three mesh nodes and looking into a wired connection between units. Check the connection method for your chosen setup.

Version: 3-pack, dual-band (2.4 GHz/5 GHz), Wi-Fi 6 (802.11ax).

View at Joybuy
Huawei eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router

Huawei eKit OptiX FG736 BE3600

Suited to anyone considering a mesh network with several units working together. Check which version and setup will work with your existing network.

Dual-band Wi-Fi 7 mesh router.

View at Joybuy

Frequently asked questions

Do you need to buy Wi-Fi 7 or a large mesh kit just to download digital magazines?

No, not for this use alone. First, check whether the problem is limited to where you read and whether an extra node can maintain a good connection to the main node there. TP-Link warns that adding more Deco nodes doesn’t always improve stability or throughput.

How can you check that an extra node is connected properly after installation?

Use the connection view in your chosen system. TP-Link explains how to see in the Deco app which Deco a satellite is connected to and whether Ethernet backhaul is active. The process may differ for other systems.

What warranty are you entitled to when buying in the Netherlands?

In addition to any manufacturer’s or retailer’s warranty, statutory consumer rights apply in the Netherlands. According to ACM ConsuWijzer, the retailer is responsible for providing an appropriate solution if a product used normally doesn’t meet the reasonable expectations you could have had. There isn’t simply one fixed statutory warranty period for every router.

Can you use your own router in the Netherlands instead of your provider’s?

According to ACM ConsuWijzer, you have the right to use your own router. Your device must meet the applicable connection and safety requirements, so ask your provider for the necessary settings if you want to replace its equipment. Connecting a mesh kit to your existing router is different from replacing that router.

What should you look for in the CE marking on a mesh node?

The Dutch Authority for Digital Infrastructure states that radio equipment must display the CE marking. Check the exact version and follow the installation instructions. The product name alone doesn’t confirm which marking is on the device supplied.