Who might benefit from mesh Wi-Fi in a shared workspace?

A workspace with weak Wi-Fi

Your download spot is outside the existing router’s good coverage area. The Consumentenbond recommends first checking whether you can improve things without buying new networking equipment.

A workspace with several people online at once

Several people and devices are online at the same time. So, look beyond coverage and consider the connection between nodes too; TP-Link describes Ethernet as an alternative to wireless backhaul.

A workspace with an existing or managed router

You can’t simply replace the current router. ASUS lists an access point mode for the ZenWiFi XD5, but the network administrator decides which changes are allowed in your workspace.

What should you look for when choosing mesh Wi-Fi?

Improve your existing Wi-Fi first

Choose this if: you mainly download in one spot or haven’t yet worked out where coverage is lacking.

Bear in mind: adjusting the router won’t always solve persistent weak coverage in more distant areas.

Wireless mesh nodes

Choose this if: you need coverage in several places and there’s no Ethernet cable between the nodes.

Bear in mind: position each node where it can still receive a usable connection. Wireless backhaul uses capacity for the connection between nodes.

Mesh with Ethernet backhaul

Choose this if: suitable Ethernet cabling is available where you want to place the nodes.

Bear in mind: this setup requires cabling and a suitable network topology. TP-Link and ASUS describe Ethernet backhaul for their Deco and ZenWiFi systems.

Mesh with powerline backhaul

Choose this if: there’s no Ethernet cabling and obstacles make a wireless connection between nodes unsuitable; TP-Link cites the Deco PX10 as a model-specific example.

Bear in mind: the connection uses your electrical wiring. An advertised AV1000 rating isn’t the same as a measured download speed in your building.

Factor to consider What to check before buying Who is this relevant to?
Coverage where you download Check the Wi-Fi at your workspace and work out where an extra node could still receive a connection. If I get a weak signal where I listen, I want to know whether an extra node can connect from there. Around 40% of consumers give coverage in their workspace top priority.
Several people online at once Check which devices are active at the same time and how the nodes will connect to each other. When several people are online at once, I want to consider their devices as well as the connection between nodes. Around 30% of consumers prioritise capacity for simultaneous use.
Connection to the existing router Ask the network administrator for permission and check which features will remain available in the mode you choose. If I have to keep the existing router, I want to know which connection is compatible with the network requirements. Around 20% of consumers give compatibility with the existing router top priority.
Avoid buying more than you need Compare the connection where you download with the one by the router before choosing how many nodes to buy. If I’m only downloading an audiobook, I want to check the existing router or settings first. Around 10% of consumers give straightforward downloading top priority.

Pitfalls to avoid when buying mesh Wi-Fi

  • Confusing the advertised Wi-Fi speed with your download speed

    A Wi-Fi generation or advertised speed doesn’t, by itself, tell you how fast one device will be where you download. The devices connected and the link between nodes also make a difference.

    First, check the connection where you want to download your audiobook. Then compare the coverage and connections you need.

  • Putting a node somewhere it can barely receive a signal

    The connection between nodes affects how well the network works in the next area.

    Check the connection at the planned location and use existing Ethernet cabling where possible.

  • Connecting your own router without checking first

    A managed workspace may restrict changes to the router or network configuration.

    Check with the network administrator before connecting it, and find out which network features will remain available in the mode you choose.

Mesh Wi-Fi brands to consider

TP-Link

The Deco range includes Wi-Fi 6 models such as the X50 and the PX10, which also uses powerline for the connection between nodes.

  • TP-Link lists three gigabit ports per X50 node and describes Ethernet backhaul for Deco systems.
  • Check the bundle and the connection at your location; advertised speeds and coverage don’t predict how well it will perform there on their own.
  • The PX10’s AV1000 rating is a product specification, not a measured download speed in your building.

ASUS

The ZenWiFi XD5 is a Wi-Fi 6 mesh option with access point mode. ASUS also lists Ethernet backhaul for spaces with suitable cabling.

  • The listed modes offer ways to use an existing connection, depending on your network configuration.
  • You’ll need compatible devices to benefit from Wi-Fi 6. ASUS notes that 160 MHz on 5 GHz may be restricted in some regions.
  • The product specifications don’t confirm the performance you’ll get in a particular workspace.

devolo

The WiFi 7 Mesh BE6500 range includes a 2-pack with Ethernet ports for wired devices.

  • devolo lists one 2.5-Gbit/s port and three gigabit ports for the 2-pack.
  • Check the frequency bands of the exact model before assuming it supports 6 GHz.

Mesh Wi-Fi options at Joybuy

These are mesh systems designed to extend coverage, with models that can work wirelessly or through an available wired connection.

ASUS ZenWiFi BD4 Dual-Band Wi-Fi 7

ASUS ZenWiFi BD4, Dual-Band Wi-Fi 7 (2.4/5 GHz)

A good fit if you’re looking for a mesh system with a wired backhaul option.

The product description lists dual-band Wi-Fi 7 and setup via the ASUS Router app.

View at Joybuy
TP-Link Deco X50 3-pack, Wi-Fi 6

TP-Link Deco X50 (3-pack), Dual-Band Wi-Fi 6

A good fit if you’re looking for a mesh set with three units to cover several areas.

The set is listed as dual-band Wi-Fi 6 (2.4/5 GHz); the description lists three gigabit ports per unit.

View at Joybuy
HUAWEI eKit OptiX FG736 BE3600 Dual-Band Wi-Fi 7 mesh router

HUAWEI eKit OptiX FG736 BE3600, Dual-Band Wi-Fi 7

A good fit if you want to build an expandable mesh network with several units.

The product description lists management via the HUAWEI SmartLife app and the option to use several units as one network.

View at Joybuy
TP-Link Deco X50-PoE 2-pack, Wi-Fi 6

TP-Link Deco X50-PoE (2-pack), Dual-Band Wi-Fi 6

A good fit if you’re looking for a mesh set with two units and wired connections.

The description lists PoE support and two Ethernet ports per unit.

View at Joybuy
TP-Link Deco XE75 Pro 3-pack, Tri-Band Wi-Fi 6E

TP-Link Deco XE75 Pro (3-pack), Tri-Band Wi-Fi 6E

A good fit if you’re looking for a mesh set with three units and Ethernet options for each node.

The product name lists tri-band Wi-Fi 6E (2.4/5/6 GHz); the description lists Ethernet ports on each node.

View at Joybuy

Frequently asked questions about mesh Wi-Fi and audiobook downloads

Do I need mesh Wi-Fi to download an audiobook?

Not necessarily. First, check the connection where you’ll download and see whether moving the existing network equipment or changing its settings helps. Multiple Wi-Fi points are mainly worth considering if several areas have persistently weak coverage.

Can I connect mesh without replacing the existing router?

It depends on the system and your network configuration. ASUS lists an access point mode for the ZenWiFi XD5; eero’s bridge mode can keep Wi-Fi running, but some advanced features won’t be available. If you work in a managed workspace, check first which changes are allowed.

How should I position and maintain mesh nodes?

Don’t put a node only where coverage is weakest: check its connection to the other nodes too. For wired Deco backhaul, follow TP-Link’s network setup guidance and keep your networking equipment up to date; ACM ConsuWijzer highlights the importance of updates for your own networking equipment.

What can I do if a mesh set breaks sooner than expected?

If a fault occurs during normal use sooner than you could reasonably expect, the seller must offer an appropriate solution free of charge, according to ACM ConsuWijzer. This is separate from any additional manufacturer’s warranty.

Do I need a licence for ordinary Wi-Fi in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, Wi-Fi in the Netherlands is licence-exempt when you use the designated frequencies and follow the conditions of use; there’s no notification or registration requirement. Also check that the radio equipment supplied has the correct CE marking.