Portfolio uploaders
You regularly send large work files and want to find out whether Wi-Fi or your internet connection is limiting your upload speed.
Start by testing the upload speed on a computer connected to your modem or gateway by Ethernet. If that upload speed is also low, TP-Link recommends checking the modem or internet connection first rather than replacing your mesh Wi-Fi. If the wired upload speed is usable but Wi-Fi is not working well in your shared workspace, compare mesh with wired backhaul—if cables and suitable ports are available—with a wireless setup. Also check guest access and compatibility with your existing modem.
You regularly send large work files and want to find out whether Wi-Fi or your internet connection is limiting your upload speed.
You need a reliable connection in a spot outside the main router’s good coverage area, while other people are using the network.
You want to give visitors internet access and find out whether their access to work devices can be restricted.
Best when: Ethernet cables run to your workspace and a stable connection between nodes is a priority.
Bear in mind: you’ll need cables and suitable ports. ASUS Support also stresses the importance of connecting the network switch correctly.
Best when: there’s no cabling and you can position the nodes so they maintain a good connection with each other.
Bear in mind: performance in your workspace also depends on placement, network load and the connection between nodes.
Best when: you’re not yet sure whether the issue lies with Wi-Fi, your modem or your internet connection.
Bear in mind: a test won’t fix a persistent dead zone, so take measurements both over a wired connection and in your workspace.
| What to consider | What to look for when buying | Who is it important for? |
|---|---|---|
| Reliable uploads | Compare a wired upload test with a measurement in your workspace, and check whether the unit you choose has a spare Ethernet port. | If I send large portfolio files, I want to know whether Wi-Fi is the limiting factor before replacing equipment. Around 33% of consumers prioritise reliable uploads. |
| Coverage in your workspace | Check whether you can run cables between nodes. If not, assess where you plan to place the additional node. | When I work outside the main router’s good coverage area, I need a usable connection right there. Around 27% of consumers prioritise coverage in their workspace. |
| Separate access | Check for a guest network and the settings available in the router or access point mode you plan to use. | If visitors need internet access, I want to find out how their access to work devices can be restricted. Around 20% of consumers prioritise access management. |
| Suitability for your space | Check how many units are included, which ports are available and what setup options are available for your existing modem. | When I install the system in a shared workspace, I want the pack contents and connections to suit my setup. Around 20% of consumers prioritise easy integration. |
A new mesh system won’t automatically fix a limitation with your modem or internet provider.
Before buying, compare a wired upload test through your modem with a Wi-Fi measurement in your workspace, as TP-Link recommends.
An additional node will only help if it can maintain a usable connection to the main node from its chosen position.
First, work out where you can position the nodes and whether Ethernet can run between them. Without a cable, you may need to reposition them to improve the connection between nodes.
A wired setup may require extra cables and a practical route through the space.
A manufacturer’s warranty is not the same as the seller’s responsibility for a faulty product. The Dutch government states that there is no fixed statutory warranty period in the Netherlands.
Keep your proof of purchase and discuss any fault with the seller. For information relevant to your specific situation, consult the Dutch government’s guidance.
The Dutch Authority for Digital Infrastructure states that radio equipment placed on the market in the Netherlands must meet the applicable European requirements and carry the correct CE marking.
Check the marking on the item you receive and make sure you have the exact product version you intended to buy.
The Deco X50 range is a useful point of comparison for Wi-Fi 6 mesh, with the option of a wired connection between nodes.
The ZenWiFi BD4 is worth considering if you want to compare 2.5G ports, guest access and the choice of router or access point mode.
The eero 6+ is a useful point of comparison if app-guided setup and expanding an existing eero network are important to you.
These products are mesh Wi-Fi systems for workspaces where you want to extend coverage. Check each model to make sure the version and connection options listed suit your setup.
No image available
A set of two mesh units to consider if you need coverage in several places and want to explore a wired connection between nodes.
Pack contents: 2-pack.
No image available
An option if you’re looking for a mesh system with two units and want to include guest access in your comparison.
Tri-band; 2.4 GHz, 5 GHz and 6 GHz; Wi-Fi 7 (802.11be).
No image available
Worth considering if you’re comparing mesh systems for a workspace and want to check guest access and wired backhaul.
Dual-band; 2.4 GHz and 5 GHz; Wi-Fi 7 (802.11be).
No image available
A set of three units to compare if you want to extend coverage across several rooms and guest access is important to you.
Dual-band; 2.4 GHz and 5 GHz; Wi-Fi 5 (802.11ac).
No image available
An option to compare if you need three mesh units and want to explore a wired connection between nodes.
Dual-band; 2.4 GHz and 5 GHz; Wi-Fi 6 (802.11ax).
First, compare the upload speed on a computer connected directly to your modem or gateway by Ethernet with the upload speed over Wi-Fi in your workspace. If the wired upload speed is also low, check your modem or internet connection first, as TP-Link recommends.
Wired backhaul is worth considering if you can run cables between the nodes and need a stable connection in your workspace. Check that the units you choose have suitable spare ports, and connect any network switches according to the manufacturer’s instructions.
Position the nodes so that the connection between the main node and the additional node remains usable. The additional node itself needs to have a good connection to the main node. Test Wi-Fi in your workspace and move the node if the connection there is too weak.
Check whether the model you choose has a guest network and what access restrictions are available in the router or access point mode you plan to use. ASUS states that the ZenWiFi BD4 guest network provides internet access while limiting access to the local network.
Check the CE marking on the device you receive and make sure you have the exact product version you intended to buy. The Dutch Authority for Digital Infrastructure states that radio equipment placed on the market in the Netherlands must meet the applicable European requirements.