Choose your mesh Wi-Fi system based on where you watch and how it connects to your video server or NAS. If you have network cables in place, look for wired backhaul and enough Ethernet ports. Want to keep your existing router? Check that the mesh system supports access point mode. Mesh Wi-Fi won’t solve problems caused by a playback device that doesn’t support a video format.
Who should consider mesh Wi-Fi for a video library?
Viewers on multiple floors
If your library is hard to access in some rooms, consider where you could place mesh nodes and whether you can connect them to each other by cable. The Dutch Consumers’ Association highlights the importance of placement, while TP-Link explains Ethernet backhaul for Deco.
Households with a wired NAS
If you want to connect your server, television or mesh nodes via Ethernet, count the available ports and check the cable route. TP-Link and NETGEAR describe wired connections between compatible mesh nodes.
Households with different playback devices
If you use a television, phone and tablet, for example, to access the same library, check both the network connection and support for your video files. Plex explains that direct playback depends on whether the file is compatible with the player.
What should you look for when choosing?
First, map out where you watch and how your devices connect to the server. Then check whether a wired connection or keeping your existing router will determine which system you need.
| What to consider |
What should you check? |
Who is this for? |
| Coverage where you watch |
Identify rooms with a weak signal and check how many nodes you need and where they could go. |
If the connection is unreliable in different viewing areas, you’ll want to know whether you can place nodes effectively there. Around 31% of consumers say coverage where they watch is their top priority. |
| Wired server connection |
Check the cable route, available ports and whether the system supports your preferred backhaul setup. |
If you want to connect your NAS and mesh nodes by cable wherever possible, consider the full route between the server, router and nodes. Around 25% of consumers prioritise a wired connection. |
| Router and playback devices |
Check for access point mode, local network access and whether your devices can play the files. |
If you want to keep your router and use the same library on different devices, your network setup matters. Around 25% of consumers say compatibility with their existing devices and router is their top priority. |
| Cost and management |
Compare systems with the number of nodes you need and check whether you’ll need extra cables or a switch. |
If you want enough coverage without overlooking unused features or connections, consider the complete setup. Around 19% of consumers prioritise cost and management. |
Common pitfalls when choosing mesh Wi-Fi
-
Assuming the advertised Wi-Fi speed is what you’ll get in every room
Your connection can be affected by the placement of the nodes, your home and the devices you use. The player and video file can also be the limiting factor.
Identify areas with a weak signal and, if you have playback problems, check file compatibility before choosing a newer generation of Wi-Fi. The Dutch Consumers’ Association notes that the Wi-Fi version alone doesn’t indicate performance.
-
Planning for a wireless satellite as if it had wired backhaul
Wired backhaul only works if there’s a suitable cable route and the system supports the connection you’ve chosen. The exact setup varies between systems.
Check the cable route, available ports and supported topology for the specific system. You may also need extra Ethernet cables or a switch for the cable route.
-
Using a guest network for a player that needs to access the server
A guest network may restrict access to your local network. ASUS describes this limitation for the guest network on the ZenWiFi BD4.
Connect devices that need to access the library to a suitable local network, and check your system’s access settings.
Relevant mesh Wi-Fi brands
TP-Link
Deco could be a good fit if you want to keep your existing router and check whether access point mode works with your network.
- TP-Link explains how to use access point mode with Deco when your existing router continues to manage the network functions.
- Check the ports and connection options between mesh nodes for the specific system; features vary by model.
ASUS
The ZenWiFi BD4 is worth considering if 2.5G ports and a choice of router or access point mode suit your network.
- ASUS lists two 2.5G WAN/LAN ports per unit for the BD4, along with several operating modes.
- The BD4 is dual-band, and its stated wireless data rates don’t indicate the speed you’ll get in your home. Also check the version of the system and the plug type.
FRITZ!
The FRITZ!Mesh Set 1700 could suit you if you’re looking for a mesh system with multiple nodes and want to keep your existing router.
- FRITZ! explains how to connect this system to an existing router or fibre modem and set it up using an app.
- Check that the version on offer is the three-piece system you want and find out how to connect the nodes by cable.
NETGEAR
Wired backhaul on Nighthawk Mesh is worth comparing if you need a cable connection between the router and satellites.
- NETGEAR describes a cable connection as an alternative to the wireless connection between the router and satellites for certain Nighthawk Mesh models.
- The number of ports and possible setups vary by model, so check the details for the specific system.
Joybuy products for mesh Wi-Fi and video streaming
These mesh systems are options to compare for multiple viewing areas and, where the listed ports are suitable, wired network equipment. Before buying, check that the specific version meets the applicable European radio equipment requirements and has CE marking. The Netherlands Authority for Digital Infrastructure states that stricter digital security requirements have applied to the wireless equipment concerned since 1 August 2025.
Image unavailable
TP-Link Deco BE68 (2-pack)
An option for a two-node mesh setup with wired network equipment.
Tri-band Wi-Fi 7. Per unit: 10G, 2.5G and 1G WAN/LAN ports.
Joybuy
Image unavailable
ASUS ZenWiFi BT8 (2-pack), tri-band Wi-Fi 7
A two-unit mesh system to compare for multiple viewing areas and wired network equipment.
The listed Ethernet ports include 1G and 2.5G ports.
Joybuy
Image unavailable
TP-Link Deco M4 (3-pack), dual-band Wi-Fi 5
Three units offer a multi-node setup to compare for viewing areas in different rooms.
Per unit: two 1G Ethernet ports.
Joybuy
Image unavailable
TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6
A three-node system to compare if you have several areas where you watch.
Per unit: three gigabit Ethernet ports.
Joybuy
Image unavailable
TP-Link Deco XE75 Pro (3-pack), tri-band Wi-Fi 6E
A three-node system for a setup with multiple viewing areas.
Tri-band, with 2.4GHz, 5GHz and 6GHz bands.
Joybuy
Frequently asked questions about mesh Wi-Fi and video libraries
Do I need to replace my existing router?
Not necessarily. TP-Link explains how to use access point mode with Deco when your existing router continues to manage the network functions. For another mesh system, check which operating modes and connections it supports.
Why does one device keep buffering when others play the same video file?
First check whether the player supports the file and the subtitles you’ve selected. Plex explains that direct playback depends on the capabilities of the playback client; an incompatible combination may require transcoding. A mesh system won’t solve this by itself.
How can I check whether my server and players can find each other?
Check whether your players can see the server on the local network and whether the mesh app shows a cable connection as Ethernet backhaul. TP-Link explains how to check this using the network map in the Deco app.
What extra connections or equipment should I check in advance?
Count the mesh nodes and available Ethernet ports you need, and check whether the installation requires extra cables or a switch. Also check the management and update options for the specific system, and confirm the warranty terms with the seller.
Which rules apply when buying and using these products in the Netherlands?
According to the Netherlands Authority for Digital Infrastructure, radio equipment placed on the market in the Netherlands must meet the applicable European requirements and carry CE marking. Stricter digital security requirements have applied to the wireless equipment concerned since 1 August 2025. The Dutch Government states that you may make a private copy of copyright-protected material for your own use, but you may not distribute it or make it available to the public. This does not automatically mean that every source or form of sharing is permitted.