Who is this choice relevant to?

Housemate who listens to music in several rooms

Wants to access a local music library or speakers from other rooms. Sonos requires shared files to have the right access permissions.

Resident in a home with busy Wi-Fi

Shares the network with lots of devices being used at once and needs to weigh up both the connection and where to place extra Wi-Fi points. The Consumentenbond notes that where you place your extenders matters.

Administrator of the shared network

Wants to make music available without giving every guest the same access, and needs to take the existing router into account. Spotify requires the same Wi-Fi network for the first connection via Spotify Connect.

What should you look for when buying?

Buying concern What should you check? Who is this important to?
Coverage between rooms Work out where the router, library and speakers will go; decide how many nodes you need and whether Ethernet backhaul is possible. The Consumentenbond emphasises that where you place Wi-Fi points matters. If I want to play music in several rooms, coverage is my main concern; around 31% of consumers prioritise coverage between rooms.
Access to the music library Check that the computer or NAS will remain available and that playback devices can open the folder with the right permissions. For a Sonos library, Sonos specifies SMBv2 or SMBv3 for a NAS. If I want to play music from a shared folder, both availability and access permissions matter; around 25% of consumers prioritise access to the library.
Simultaneous use and node connection Check whether the nodes can be connected via Ethernet; otherwise, compare the bands supported by the exact model. TP-Link describes the Deco X50 as dual-band with optional Ethernet backhaul, and the XE75 as supporting 2.4, 5 and 6 GHz bands. When lots of devices are being used at once, I want to factor in the connection between nodes; around 25% of consumers prioritise capacity and the node connection.
Connectivity and management Check your existing router, available LAN ports and the level of access you want guests to have. FRITZ! describes a mesh master with connected repeaters; the Consumentenbond points out the energy consumption of equipment that stays on all the time. If I want to keep my existing router and manage access for housemates and guests, connectivity and management are decisive; around 19% of consumers prioritise these points.

Common pitfalls

  • Assuming the stated coverage area means there’ll be a signal in every room

    Your connection also depends on where the nodes are placed and which rooms they need to cover.

    First, identify where the signal is weak and where you could place the nodes. Don’t treat the manufacturer’s figures as a measurement of coverage in your home.

  • Using a guest network for shared speakers and files

    Coverage alone doesn’t give playback devices access to shared files. Sonos says that guest networks aren’t suitable for its system.

    Agree on who can control the music, then check access using the equipment and playback system you actually use.

  • Judging a tri-band product by its model name alone

    The listing for the Deco XE75 (1-pack) specifies 2.4, 5 and 5GHz bands and Wi-Fi 6 (802.11ax), while TP-Link describes the XE75 as supporting 2.4, 5 and 6 GHz bands and Wi-Fi 6E.

    Before treating an offer as the same variant, compare the full model details and listed bands with the manufacturer’s specifications.

  • Treating a standalone repeater as a complete new router system

    A FRITZ!Repeater is an expansion option that depends on a compatible existing mesh master; a repeater and a complete router system don’t automatically serve the same purpose.

    Check which router or mesh master you already have at home and what role the new device needs to play.

Brands to compare

TP-Link

TP-Link describes the Deco X50 as a dual-band Wi-Fi 6 mesh system with optional Ethernet backhaul. The Deco XE75 is a tri-band Wi-Fi 6E alternative.

  • According to TP-Link, X50 units can also be connected to one another via Ethernet if you have suitable cabling.
  • TP-Link specifies 2.4, 5 and 6 GHz bands for the XE75.
  • Check the pack size and exact model. An XE75 listing may specify different bands and a different Wi-Fi standard from the manufacturer’s specifications.

ASUS

ASUS describes the ZenWiFi XD5 as a Wi-Fi 6 mesh system supplied as a set of three routers.

  • A set of three routers may be useful if several rooms need a Wi-Fi point.
  • ASUS’s stated coverage and speed aren’t measurements for your home. Check the exact set configuration too.

FRITZ!

The FRITZ!Repeater 3000 AX is an expansion option for a compatible existing FRITZ! mesh network.

  • According to FRITZ!, the device has three radio bands and two gigabit LAN ports; it can be connected via LAN.
  • A standalone repeater isn’t automatically a replacement for a complete router system. Check which mesh master you already have.

Mesh Wi-Fi options at Joybuy

These products are mesh Wi-Fi options for use across several rooms. Compare the pack size, listed bands and whether you can connect the nodes by cable with your network setup.

TP-Link Deco BE68 mesh Wi-Fi system, 2-pack

TP-Link Deco BE68 (2-pack)

A 2-pack mesh setup is designed for anyone wanting to spread Wi-Fi points across several rooms; check how the units connect to your existing network.

View at Joybuy
ASUS ZenWiFi BT8 mesh Wi-Fi system, 2-pack, white

ASUS ZenWiFi BT8 (2-pack), tri-band Wi-Fi 7 (802.11be), 2.4/5/6 GHz, white

The 2-pack is suited to a setup with multiple Wi-Fi points; the product name specifies tri-band support at 2.4, 5 and 6 GHz and Wi-Fi 7 (802.11be).

View at Joybuy
TP-Link Deco XE75 Pro mesh Wi-Fi system, 3-pack

TP-Link Deco XE75 Pro (3-pack), tri-band Wi-Fi 6E (802.11ax), 2.4/5/6 GHz

A 3-pack may suit a home that needs several mesh units; the product name specifies tri-band, Wi-Fi 6E (802.11ax) and 2.4, 5 and 6 GHz bands.

View at Joybuy
TP-Link Deco XE75 mesh Wi-Fi system, tri-band, Wi-Fi 6E

TP-Link Deco XE75, tri-band Wi-Fi 6E (802.11ax), 2.4/5/6 GHz

The product name specifies tri-band support at 2.4, 5 and 6 GHz and Wi-Fi 6E (802.11ax); compare the exact model with the manufacturer’s specifications.

View at Joybuy
TP-Link Deco X50 mesh Wi-Fi system, 2-pack, white

TP-Link Deco X50 (2-pack), dual-band Wi-Fi 6 (802.11ax), 2.4/5 GHz, white

The 2-pack is designed to provide Wi-Fi in several places; TP-Link specifies optional Ethernet backhaul between compatible Deco X50 units.

View at Joybuy

Frequently asked questions

Do my phone and speaker need to be on the same Wi-Fi network?

That depends on the playback system. Sonos says that devices running the Sonos app must be on the same Wi-Fi network as Sonos, and that guest networks aren’t compatible. Spotify also requires the same Wi-Fi network for the first connection to a speaker via Spotify Connect; don’t assume this instruction applies automatically to every other system.

Can a NAS provide music without a housemate leaving their computer on?

For a Sonos music library, a NAS can keep files available without a computer being switched on. Sonos specifies SMBv2 or SMBv3 for this use; also check that the shared folder has the right access permissions.

Where should I place the mesh points?

Place a wirelessly connected point somewhere it can still get a usable connection to the network, rather than simply putting it in the room with the weakest signal. After installation, check the signal and access to the music library from the rooms where you want to use it.

What compliance checks should I make when buying a Wi-Fi router in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, radio equipment placed on the European market must meet the applicable requirements and carry the required CE marking. Stricter digital security requirements for certain wireless equipment have applied since 1 August 2025; check whether they apply to the specific model you want to buy.