Who is this buying guide for?

Anyone managing a lounge with patchy Wi-Fi

You want the shared screen and the screens in other viewing spots to stay connected. So, look at where you can place the mesh nodes and how they connect to each other, rather than focusing only on the advertised maximum Wi-Fi speed.

Households streaming on several screens at once

You want to know how the connection performs when several screens are streaming at the same time. Check this on the devices and in the places where people actually watch.

Anyone who wants to keep their existing router

You want to extend your Wi-Fi without unnecessarily replacing your current router setup. So, check for access point mode, the available ports and which management features will remain available.

What should you look for in mesh Wi-Fi?

Start with the weakest viewing spot. Then consider simultaneous streams, the connection between mesh nodes and how the system connects to your router.

What to consider What to look for when buying Who is this important for?
Coverage in every viewing spot Identify the weakest viewing spot and work out where you can place the mesh nodes. Check whether you can connect the nodes with Ethernet cables. If the shared screen is further away or behind walls, I want to know whether the connection will be usable there; around 36% of consumers prioritise coverage in the weakest viewing spot.
Several streams at once Test the connection on the viewing devices while the other screens are also in use. Netflix recommends a stable connection of at least 15 Mbps for one 4K UHD stream; this guideline depends on the service and picture quality. If several screens are streaming at the same time, I want to assess the connection on each device while it’s in use; around 29% of consumers give simultaneous streams the highest priority.
Connecting a screen and keeping your router Count the ports on each mesh node that you’ll need for the router, backhaul and screens. Also check whether the specific system supports access point mode. If I want to connect the lounge screen by cable and keep my router, I want to know in advance how the connections and network modes will work; around 21% of consumers prioritise connections and ports.
Management and equipment needed Check which features are available in the network mode you choose and whether you’ll need extra mesh nodes, cables or other networking equipment. If I manage a shared network, I only want to pay for the nodes and features that suit the setup; around 14% of consumers give management and the equipment needed the highest priority.

Common buying mistakes

  • Assuming a high Wi-Fi speed means good coverage

    The maximum speed shown on the box doesn’t automatically tell you what a screen in another location will receive. The Tweakers buying guide notes that wired backhaul can often make more difference than a more expensive system set up wirelessly.

    First, map out the viewing spots and possible locations for the mesh nodes. Check whether you can connect the nodes with a network cable.

  • Counting every Ethernet port as a spare connection

    A port used to connect to the router or for wired backhaul won’t also be available for the lounge screen.

    Map out the connections needed for each mesh node before checking how many ports it has.

    Depending on your setup, you may need an extra switch or cable.

  • Assuming access point mode keeps all router features

    TP-Link says that some advanced Deco app features aren’t available in access point mode.

    Compare the router and access point modes of the specific system with the network management features you need.

Brands to consider

TP-Link

The Deco X50 could suit a setup where you want to connect a screen by cable as well as use mesh connections.

  • TP-Link lists three gigabit ports per Deco X50 unit and describes Ethernet backhaul and access point mode for Deco.
  • According to TP-Link, some advanced Deco app features aren’t available in access point mode. Advertised wireless speeds aren’t a measurement of performance in your viewing spot.

ASUS

The ZenWiFi BD4 is worth considering if its ports and network modes suit your setup.

  • ASUS specifies two 2.5G Ethernet ports per unit, as well as router, access point and AiMesh node modes.
  • ASUS specifies dual-band Wi-Fi 7, without a separate third radio band. The stated speeds and coverage don’t guarantee a particular result for simultaneous streams in a specific location.

FRITZ!

The FRITZ!Mesh Set 1700 is worth considering if you want to keep your existing router and are looking at a three-node system.

  • FRITZ! lists guest access and automatic updates for the system.
  • Check how many connections will be available on the nodes you choose for a wired lounge screen. Manufacturer claims about coverage aren’t a measurement of performance in your home.

Google

Nest Wifi Pro is worth considering if you’re looking at Google network management and can match the nodes to your cabling setup.

  • According to Google, each Nest Wifi Pro router has two gigabit Ethernet ports.
  • Google says that Nest Wifi Pro can’t be combined with older Nest Wifi or Google Wifi nodes to create a single mesh network.

Joybuy product picks

This selection includes mesh systems with different numbers of nodes, connection options and cabling setups. Before buying, check that the version supplied has the required CE marking, as required by the Dutch Authority for Digital Infrastructure for equipment offered on the Dutch market.

TP-Link Deco BE68 mesh system, 2-pack

TP-Link Deco BE68 (2-pack)

Suits a setup where you want to connect the mesh nodes by cable and connect a screen via Ethernet.

2-pack; Wi-Fi 7 mesh system. Each unit is listed with a 10 Gbps, a 2.5 Gbps and a 1 Gbps WAN/LAN port. The product description mentions wired and wireless backhaul.

View at Joybuy
TP-Link Deco X50 mesh system, 3-pack

TP-Link Deco X50 (3-pack)

Suits a setup where you want to extend Wi-Fi to several viewing spots and are considering Ethernet backhaul.

3-pack; Wi-Fi 6 mesh system. Each unit is listed with three gigabit ports. The product description mentions Ethernet backhaul.

View at Joybuy
TP-Link Deco XE75 mesh system with tri-band Wi-Fi

TP-Link Deco XE75

Suits a setup where you’re considering a mesh system with 2.4, 5 and 6 GHz bands and wired connections for screens.

Wi-Fi 6E; tri-band with 2.4, 5 and 6 GHz bands. Each unit is listed with three gigabit ports.

View at Joybuy
TP-Link Deco X50-PoE mesh system, 3-pack

TP-Link Deco X50-PoE (3-pack)

Suits a three-node setup where powering the nodes via Ethernet works for your chosen locations.

3-pack; Wi-Fi 6. Each unit is listed with two Ethernet ports, and the product description mentions PoE. When planning your cabling, allow for the ports needed for network connections and the screen.

View at Joybuy
TP-Link Deco X50 mesh system, 2-pack

TP-Link Deco X50 (2-pack)

Suits a setup where you want to use two mesh nodes and possibly wired backhaul.

2-pack; Wi-Fi 6 mesh system. Each unit is listed with three gigabit ports. The product description mentions Ethernet backhaul.

View at Joybuy

Frequently asked questions

How can I check whether the connection is fast enough for the lounge screen?

Test the connection on the screen or connected streaming device, ideally while the other screens are also in use. Netflix recommends a stable connection of at least 5 Mbps for Full HD and 15 Mbps for 4K UHD on its service. These guidelines depend on picture quality and aren’t universal requirements for every stream.

Can I use a Deco system without replacing my existing router?

Yes. TP-Link describes an access point mode for using Deco behind an existing main router. Check in advance which features are available in this mode: some advanced Deco app features won’t be available.

Do I always need bridge mode with a provider’s modem?

No, it depends on your connection and whether the mesh system will work as a router or an access point. Ziggo describes bridge mode for use with your own router, but also lists features that won’t be available in this mode and says that bridge mode can’t be switched on or off on its fibre modem. Don’t assume this information applies to other providers.

Can I use my own router with my internet connection?

ACM ConsuWijzer says that a provider can’t require you to use a particular brand or model and must connect a suitable device of your own. The device must meet the applicable safety requirements; ask which connection settings you need if necessary.

What should I check on a mesh system’s CE marking?

Check that the wireless equipment supplied has the required CE marking. The Dutch Authority for Digital Infrastructure states that equipment offered on the Dutch market must meet the applicable requirements; check the marking on the product version you receive.