Archive user with poor signal in their room
You want to access the club archive from your room, but the Wi-Fi signal is weaker there than near the router. Compare where the mesh nodes can go and how they connect to each other.
Mesh Wi-Fi is worth considering if the signal is weak in certain rooms but your internet connection is otherwise working well. Adding extra nodes won’t fix a slow connection or archive service. In a shared house, look beyond coverage: consider the connection between mesh nodes and who needs access to the local archive. TP-Link says that, in router mode, the guest and main networks on Deco are isolated from each other, which may block access for the people who need it.
You want to access the club archive from your room, but the Wi-Fi signal is weaker there than near the router. Compare where the mesh nodes can go and how they connect to each other.
You share your internet connection with housemates who are online at the same time. Check that your broadband connection, mesh setup and required ports are suitable for how devices are used around the house.
You decide which users can access the archive on your home network. A guest network may block access to local files, so you’ll need to manage archive permissions separately.
First, work out whether the problem affects only certain rooms. Then compare where the mesh nodes can go and how they connect, and decide who needs to access the local archive.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Coverage in different rooms | Check where the signal is weak and whether there are suitable places for the mesh nodes. Also see if an Ethernet backhaul is possible. | If the Wi-Fi is weak in my room, I want to know whether a node there can still connect reliably to the rest of the network. Around 33% of consumers say coverage in different rooms is their main concern. |
| Using the network at the same time | Check your internet speed, the ports available for wired devices and whether your devices support the Wi-Fi features you’re looking for. | I want to access the club archive while my housemates are online, without relying solely on an advertised Wi-Fi speed. For around 25% of consumers, simultaneous use is the top priority. |
| Access to the local archive | Find out whether the archive is accessed locally or over the internet. For a local archive, check the guest network settings and manage access permissions separately. | As the manager, I want to give the right people access while keeping the archive off limits to others. Access and security are the main concerns for around 25% of consumers. |
| Equipment and management requirements | Compare how many nodes you need, how much energy they use and whether you need any extra management features. | I want to improve coverage without installing more equipment than my home needs. Around 17% of consumers are mainly looking for a simple, limited setup. |
A Wi-Fi standard or advertised speed alone won’t tell you how well a connection will work in your home. The Dutch Consumers’ Association points out that the Wi-Fi standard alone doesn’t determine overall performance.
Start with the problem you’re actually experiencing, then compare node placement, the connection between nodes and the ports you need.
Network isolation may prevent guests from accessing the archive on the main network. TP-Link says that, in router mode, Deco’s guest and main networks are isolated from each other.
Decide who needs local access and test the settings in the operating mode you’re using.
ASUS’s Dutch specifications for the ZenWiFi BD4 list 2.4 and 5 GHz. So if 6 GHz support is essential, don’t rely on the Wi-Fi 7 label alone.
Check the frequency bands supported by the exact set before making your choice.
The Deco X50 is a dual-band Wi-Fi 6 mesh system for extending coverage, with optional Ethernet backhaul and three gigabit ports per unit.
The ZenWiFi BD4 is a dual-band Wi-Fi 7 mesh system. Compare its network modes and wired connections with your requirements.
According to FRITZ!, the Mesh Set 1700 consists of three repeaters that can be connected to an existing router via LAN.
The WiFi 7 Mesh BE6500 is available as a set with two or three nodes and may be worth considering if you want to connect wired devices.
These products include mesh setups for coverage across several rooms, with features such as Ethernet backhaul or wired connections, depending on the model.
No image available
Suitable if you want to connect several rooms and need wired connections too; the product description lists tri-band Wi-Fi 7 and MLO.
According to the product description, each unit has 10, 2.5 and 1 Gbit/s ports.
For a local archive, network isolation may restrict access; check the settings for the mode you choose.
No image available
Worth comparing if you’re looking for two mesh nodes and want the option of using Ethernet backhaul.
The product description lists dual-band Wi-Fi 6, two units, Ethernet backhaul and a guest network.
For a local archive, check that the guest network settings allow the access you need.
No image available
A three-node set to compare if you want to extend the network across several rooms.
The product description lists dual-band Wi-Fi 6 on 2.4 and 5 GHz, with three gigabit ports per unit.
Check whether three nodes are right for the areas where the signal is weak.
No image available
Worth comparing if you’re looking for a two-node mesh set and a PoE installation would suit your setup.
The product description lists dual-band Wi-Fi 6, PoE and two Ethernet ports per unit.
Check that your setup has the PoE equipment required.
No image available
Worth comparing if you need three mesh nodes and wired connections.
The product description lists tri-band Wi-Fi 6E on 2.4, 5 and 6 GHz. Each unit has one 2.5 Gbit/s port and two gigabit ports.
Check that three nodes suit your home’s layout and the areas where you need coverage.
Not necessarily. Test the connection near the router and, if possible, over a cable. Also check whether the broadband connection or the archive service itself is slow. Mesh is mainly designed to extend Wi-Fi coverage around your home.
Don’t assume they can. TP-Link says that, in router mode, Deco’s guest and main networks are isolated from each other. Local access settings may vary by model and software version, so test the access you need and manage permissions for the archive separately.
Don’t put a node only in the room where the signal has already dropped out: it also needs to connect reliably to the rest of the network. If you can run a network cable between nodes, compare a set with Ethernet backhaul or a wired access point.
Check how many nodes you need, how much energy they use and whether you need the extra management features on offer. For a specific model, also compare the current warranty and support terms.
According to the Dutch Authority for Digital Infrastructure (RDI), Wi-Fi can be used without a licence, notification or registration, provided the applicable conditions are met. The RDI also warns against equipment that doesn’t meet European requirements. If you’re considering an unusual imported version, check that it’s intended for the Netherlands and what conformity information comes with it.