Who is mesh Wi-Fi suitable for?

Viewer in a room with weak Wi-Fi

Your connection works near the router, but the theatre recording keeps buffering where you watch. First find out where the signal drops, then decide whether you need an extra access point. The Consumers’ Association recommends a wired speed test to assess your internet connection.

Housemate with lots of people online at once

Other people use the network while you’re watching. So check both the connection in the room where you watch and the one between the mesh units. An advertised top speed doesn’t tell you what your recording will actually receive in that spot.

Manager of the shared home network

You want your mesh system to work with the existing router and to agree with your housemates on who manages the settings, passwords and updates. Check which features remain available in the operating mode you choose.

What should you look for when choosing?

First establish whether the problem lies with your internet connection, Wi-Fi coverage or the connection between units. Then decide how many units you need and whether you’ll use wired connections.

What to consider What to look for Who is this most important for?
Coverage where you watch Test the connection where you watch and find out where the next unit can still get a good signal. Treat stated square-metre figures as manufacturer claims, not guaranteed coverage. If the connection mainly drops out in the room where you watch, you’ll want to target that weak spot. Around 36% of consumers give coverage where they watch top priority.
Simultaneous use Compare a wired speed test with the Wi-Fi connection where you watch during normal network use. Don’t treat advertised speeds as measured streaming speeds. If your housemates are online at the same time, you’ll want to know whether the recording keeps playing smoothly then. Around 29% of consumers prioritise stability when several people are online at once.
Existing router and management Check the available operating modes, which router assigns IP addresses and which features work in the mode you choose. Agree on who will manage the settings and updates. If you want to keep your existing router, it’s important to know how the mesh system will work with it. Around 21% of consumers give keeping their existing equipment and management arrangements top priority.
Size and running costs Choose the number of units based on the weak spots you’ve identified, and factor in any cabling work and the electricity used by equipment that stays on all the time. If you want to avoid unnecessary units or extra electricity use, look for the smallest setup that suits the situation you’ve measured. Around 14% of consumers prioritise keeping overall running costs down.

Common buying mistakes

  • Assuming a faster mesh system means faster internet

    A problem with your internet connection needs a different solution from a Wi-Fi dead spot. A mesh system won’t increase the capacity of your internet connection.

    First test the connection with a cable by the router, then compare it with the connection where you watch. If the wired connection is still a problem, contact your provider.

  • Putting an extra unit in the weakest spot

    The mesh unit itself needs a good connection to the previous unit. In the spot with the weakest signal, that connection may be poor too.

    Check the connection between the units and, where possible, use Ethernet backhaul in line with the cabling rules for the operating mode you’ve chosen.

    Cabling may involve installation work; moving the unit to a different spot may be more practical.

  • Treating two-unit and three-unit packs as the same

    The number of units varies by pack, and you won’t automatically need more units just for one viewing spot.

    Check the exact model and number of units, and match them to the places where you’ve actually found weak Wi-Fi.

    Extra units need to be positioned and use electricity when left on all the time. The Consumers’ Association includes energy use in its tests of network equipment.

  • Assuming access point mode keeps all router features

    TP-Link says some Deco features aren’t available in access point mode; the existing router continues to assign IP addresses, among other things.

    Check whether each feature you want works in the operating mode you’ve chosen, and which device provides it.

Relevant mesh Wi-Fi brands

TP-Link

The Deco X50 is a Wi-Fi 6 mesh option available in two- or three-unit packs, for anyone looking to extend coverage and potentially connect the units by cable.

  • TP-Link says the X50 has three Gigabit ports and optionally supports Ethernet backhaul.
  • The stated coverage isn’t a measurement of coverage in your home. TP-Link says not all app features are available in Deco access point mode.

FRITZ!

The Mesh Set 1700 is worth considering if you want to keep your existing router.

  • FRITZ! describes using the set with a FRITZ!Box or another router. Guest access and automatic updates are listed as set features.
  • Check whether the pack contains two or three repeaters; the number you need depends on the weak spots in your home.

ASUS

ZenWiFi BD4 is a Wi-Fi 7 mesh option for anyone specifically looking for 2.5 Gigabit connections or AiMesh features.

  • ASUS specifies two 2.5 Gigabit ports per BD4 unit.
  • The BD4 is dual-band. Wi-Fi 7 alone doesn’t prove that a theatre recording will play better; also check the number of units and what’s included in the pack.

KPN

SuperWifi is a provider-based option to explore if your shared home has KPN internet and you’re considering support or renting through your provider.

  • On its Dutch SuperWifi page, KPN offers units to buy or rent and a Wi-Fi scan via MijnKPN.
  • This option may not suit you if you use another provider or if the account holder doesn’t give permission.

Joybuy mesh Wi-Fi products

These mesh Wi-Fi products are options to compare for a shared home. Match the pack size, cabling options and features you want to the situation you’ve measured.

ASUS ZenWiFi BD4 dual-band Wi-Fi 7 in white

ASUS ZenWiFi BD4 dual-band Wi-Fi 7, white

A mesh option for anyone specifically looking for Wi-Fi 7; don’t choose based on the Wi-Fi version alone for a single theatre recording.

Wi-Fi 7 (802.11be); dual-band (2.4 GHz and 5 GHz).

View at Joybuy
TP-Link Deco X50 Wi-Fi 6 mesh system with three units

TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6

A three-unit pack to consider if your tests show several weak spots; check where the units can go and whether you can connect them by cable.

Wi-Fi 6 (802.11ax); dual-band (2.4 GHz and 5 GHz).

View at Joybuy
TP-Link Deco X50-PoE dual-band Wi-Fi 6 mesh system with two units

TP-Link Deco X50-PoE (2-pack), dual-band Wi-Fi 6

A two-unit option to consider if PoE cabling suits your setup; check in advance that you can use the cabling required.

Wi-Fi 6 (802.11ax); dual-band (2.4 GHz and 5 GHz).

View at Joybuy
TP-Link Deco XE75 Pro tri-band Wi-Fi 6E mesh system with three units

TP-Link Deco XE75 Pro (3-pack), tri-band Wi-Fi 6E

A three-unit pack to compare if several areas need attention; check whether you need those extra units in your home.

Wi-Fi 6E (802.11ax); tri-band (2.4 GHz, 5 GHz and 6 GHz).

View at Joybuy
TP-Link Deco XE75 tri-band Wi-Fi 6E mesh system with three units

TP-Link Deco XE75 (3-pack), tri-band Wi-Fi 6E

A three-unit pack to consider if you’ve identified several weak spots; match the number of units to the layout of your home.

Wi-Fi 6E (802.11ax); tri-band (2.4 GHz, 5 GHz and 6 GHz).

View at Joybuy

Frequently asked questions

How can you tell whether mesh Wi-Fi could help with a theatre recording that keeps buffering?

First test your internet connection on a computer using a network cable, then compare it with the Wi-Fi where you watch. If the wired connection is slower than you expect, contact your provider: mesh Wi-Fi won’t increase the capacity of your connection. Netflix recommends stable speeds of 5 Mbps for Full HD and 15 Mbps for 4K for its own service; don’t assume these figures apply to other streaming services.

Can you use mesh Wi-Fi without replacing your existing router?

That depends on the system and the mode you choose. TP-Link describes a Deco access point mode that works behind an existing router, with that router continuing to assign IP addresses. Check which features are available in this mode, and agree with your housemates on who will manage the settings.

Can you use your own mesh router in the Netherlands?

According to ACM ConsuWijzer, you’re free to choose your own router, but a provider can set security requirements for equipment on its network. If you want to connect your own modem directly, also check the connection technology and settings; that’s different from connecting a mesh system behind your existing router.

What maintenance and management should you agree on?

Agree on who will install updates and set a strong administrator password. VeiligInternetten recommends keeping routers up to date. If a product is faulty, Dutch statutory consumer rights also provide a legal guarantee from the seller; this isn’t automatically limited to the manufacturer’s guarantee.

How do you choose between a two-unit and a three-unit pack?

Choose based on the places where you’ve actually found weak Wi-Fi, not just the number of rooms or the stated coverage area. Extra units also need to be positioned and use electricity when left on all the time; the Consumers’ Association includes energy use in its tests of network equipment.