Who is mesh Wi-Fi suitable for?

Housemate who works in several rooms

You want to access shared project files from different rooms, so you’re looking at both Wi-Fi coverage and the connection between mesh nodes.

Collaborator who shares large files

You share files between devices at home. As well as Wi-Fi, you’re considering Ethernet ports and whether the mesh nodes can be connected by cable.

Manager of the shared network

You want to give housemates access to shared files and, where necessary, keep visitors off the main network. The network mode and local access settings are important here.

What should you look for when choosing?

What to consider What should you check? Who is this important for?
Coverage between rooms Identify the areas with weak reception and check how many mesh nodes are included in the set. Also see whether the nodes can be connected by cable. If I work on project files in different places, I want to know whether the connection is usable in those locations. This is the top priority for around 36% of consumers who want coverage between rooms.
Local file transfers Check how many Ethernet ports each node has, their speed and whether you can run a cable between mesh nodes. ASUS lists two 2.5GbE ports per ZenWiFi BD4 node; TP-Link lists three gigabit ports per Deco X50 node. If computers or storage devices share large files, I want to know whether the wired connections are suitable for those devices. Local file transfers are the top priority for around 28% of consumers.
Simultaneous use and sharing costs Work out how many rooms and devices the set needs to serve. Compare the number of nodes, bands and ports you need; a higher Wi-Fi speed rating alone doesn’t predict the speed of a single file transfer. If several housemates are online at the same time, I want a suitable set without paying for features we don’t need. Around 22% of consumers prioritise simultaneous use and shared costs.
File and guest access Decide which devices need to access each other and check the guest and local access settings in your chosen network mode. How these work can vary by model and software version. If housemates need to share files but visitors mustn’t have access to the main network, I want to understand how network separation works before setting it up. Access management is the top priority for around 14% of consumers.

Common pitfalls

  • Mistaking the total Wi-Fi speed for the speed of a single file transfer

    Manufacturers quote maximum speeds for Wi-Fi systems and bands. These don’t tell you what speed two devices will achieve when transferring a file in your home.

    Compare your devices’ connections, the ports on the mesh nodes and the connection between those nodes. Don’t treat quoted speeds as a guarantee of performance in your home.

  • Putting housemates on a guest network when they need to share files

    TP-Link says that on Deco systems in router mode, the guest network is separate from the main network. As a result, a device on the guest network may not be able to access shared files on the main network.

    Decide which devices need to access local resources, then check access after setting up the network. In access point mode, a local access setting may be relevant.

  • Choosing access point mode without checking what it means for router features

    TP-Link says some Deco features aren’t available in access point mode, including port forwarding and address reservation.

    Check in advance whether your existing router provides the network features you need and whether it will continue to manage the network.

Brands to compare

TP-Link

According to TP-Link, the Deco X50 is a dual-band Wi-Fi 6 mesh system with gigabit ports and optional Ethernet backhaul.

  • TP-Link lists three gigabit ports per Deco X50 node, with the option of a wired connection between nodes.
  • This model has gigabit ports, not 2.5GbE ports. The stated coverage isn’t a measurement taken in your home.

ASUS

According to ASUS, the ZenWiFi BD4 and BT7 differ in several ways, including the number of bands and the stated connections.

  • ASUS lists two 2.5GbE ports per dual-band BD4 node. According to ASUS, the tri-band BT7 has a 6GHz band and four 2.5GbE ports.
  • The BD4 doesn’t have a stated 6GHz band. The stated maximum speeds and coverage areas aren’t independent measurements of performance in a shared home.

eero

According to eero, the eero 7 is a dual-band Wi-Fi 7 node that can work as a main router or extend an existing eero network.

  • eero lists two 2.5GbE ports and Wi-Fi bands at 2.4 and 5 GHz for the eero 7.
  • According to eero, you’ll need an Android or iOS app to set up and manage the system. Check that the exact set and version are right for your purchase.

Mesh Wi-Fi products at Joybuy

These products are designed for mesh Wi-Fi coverage across several rooms, with a range of bands, connections and set sizes.

ASUS ZenWiFi BT8 2-pack tri-band Wi-Fi 7

ASUS ZenWiFi BT8 2-pack

For anyone looking for a mesh set with tri-band Wi-Fi 7 and a 6GHz band for several rooms.

Two nodes; bands at 2.4, 5 and 6 GHz.

View at Joybuy
ASUS ZenWiFi BD4 dual-band Wi-Fi 7

ASUS ZenWiFi BD4

A good fit if you’re looking for dual-band Wi-Fi 7 and wired connections for local networking.

The set name lists Wi-Fi at 2.4 and 5 GHz. ASUS lists two 2.5GbE ports per node.

View at Joybuy
TP-Link Deco X50 3-pack dual-band Wi-Fi 6

TP-Link Deco X50 3-pack

For anyone looking for a three-node Wi-Fi 6 set, with the option to connect the nodes by cable.

Dual-band Wi-Fi 6; three gigabit ports per node. TP-Link describes Ethernet backhaul as an option for this model.

View at Joybuy
Huawei eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router

Huawei eKit OptiX FG736 BE3600

A mesh router for anyone looking for a dual-band Wi-Fi 7 model that can be part of a mesh network.

The product name lists dual-band Wi-Fi 7 and BE3600.

View at Joybuy
ASUS ZenWiFi BT10 2-pack tri-band Wi-Fi 7

ASUS ZenWiFi BT10 2-pack

For anyone looking for a set with tri-band Wi-Fi 7 and a 6GHz band.

Two nodes; the product name lists bands at 2.4, 5 and 6 GHz.

View at Joybuy

Frequently asked questions

Do you need to replace your existing router to use mesh Wi-Fi?

Not necessarily. TP-Link describes a Deco setup in access point mode where the existing router continues to manage the network. Check which features remain available in that mode and whether your existing router provides the network features you need.

Why can’t a housemate on the guest network access a shared project folder?

According to TP-Link, Deco separates the guest network from the main network in router mode. In access point mode, a local access setting may be relevant; available features vary by model and software version. After setup, check that the devices sharing files can access each other.

What speed do you need to share project files between devices?

Choose ports and connections that suit the devices and cabling you use. A stated total Wi-Fi speed doesn’t predict the speed of a single file transfer in your home. Also check whether you can connect the mesh nodes to each other by cable.

What should you know about the rules for mesh Wi-Fi in the Netherlands?

According to the Dutch Authority for Digital Infrastructure (Rijksinspectie Digitale Infrastructuur), radio equipment must meet the applicable European requirements. Stricter cybersecurity requirements have also applied since 1 August 2025. The RDI states that the manufacturer applies the CE marking when all applicable requirements have been met. A product name alone doesn’t confirm that a specific version has been checked.

Can you use your own router in the Netherlands?

Yes. According to ACM ConsuWijzer, you’re free to choose your router. A provider may refuse a device of your own if it doesn’t meet the same safety requirements or causes damage to the network. Also check that the router supports the network features and settings you need at home.