Who should consider this?

Seminar attendee with calls that keep cutting out

Wants to find out whether the problem is caused by Wi-Fi, the internet connection or the calling device before buying mesh nodes. Google Meet Help and Microsoft Support offer tools to help investigate call problems.

Resident with a poorly connected workspace

Has poor Wi-Fi on another floor or in a room at the far end of the home, and needs to decide whether to connect the mesh nodes wirelessly or via Ethernet. Consumentenbond highlights coverage as an important factor when choosing Wi-Fi equipment.

Household with a mix of older and newer devices

Wants to make seminar calls alongside other connected devices, without assuming they all support the same Wi-Fi generation. Consumentenbond points out that older Wi-Fi devices can connect, but won’t automatically benefit from Wi-Fi 6 improvements.

What should you look for?

First, check whether calls work well close to your router. Then work out where you need extra coverage and whether the mesh nodes can connect to each other by cable or wirelessly.

What to consider What should you check? Who is this important for?
Call quality Test a call close to your router and, if possible, using Ethernet before buying extra Wi-Fi nodes. If my call keeps cutting out, I want to know whether Wi-Fi is the cause first. Around 36% of consumers prioritise fixing call problems.
Workspace coverage Check where you can place the nodes and whether Ethernet is available between floors. Choose the number of nodes to suit your home’s layout. If my workspace is in a room at the far end of the home, I want reliable Wi-Fi there without putting a node somewhere it can barely connect itself. Around 29% of consumers prioritise workspace coverage.
Device compatibility Check which Wi-Fi bands and generations your devices support for seminars and everyday use. Don’t pay extra for 6 GHz if your devices can’t use that band. If older and newer devices are online at the same time, I want to know which features they can actually use. Around 21% of consumers prioritise compatibility.
Installation and costs Check the number of nodes, the cables and ports required, and whether your chosen setup will work with your existing router. If I’m installing the system myself, I want to know in advance which connections and settings I’ll need. Around 14% of consumers prioritise installation and total costs.

Common buying pitfalls

  • Assuming the advertised Wi-Fi speed is the speed of your seminar call

    Your internet connection, device and node placement all affect call quality too. A product specification can’t predict how a call will perform in your home.

    First, test a call close to your router and, if possible, using Ethernet. Google Meet Help recommends trying an Ethernet connection if you’re having video-quality problems.

  • Placing an extra wireless node straight in the room with the weakest signal

    The extra node still needs a usable connection to the rest of the network.

    Look at possible locations and use Ethernet backhaul if there’s a suitable cable route and the wireless connection between nodes isn’t good enough.

  • Choosing a 6 GHz system for devices without Wi-Fi 6E

    A device without Wi-Fi 6E can’t use the 6 GHz band directly.

    Check the Wi-Fi capabilities of the devices that will be online during seminars, then weigh them against the system’s features.

  • Mistaking the manufacturer’s warranty for your full legal guarantee

    In the Netherlands, the legal guarantee is separate from any commercial warranty and depends on what you could reasonably expect from the product.

    Keep your purchase and product information, and report any fault to the seller. ACM ConsuWijzer explains that the legal guarantee is a right in addition to the seller’s or manufacturer’s warranty.

Relevant brands to consider

TP-Link

TP-Link describes the Deco X50 as dual-band Wi-Fi 6 and lists Ethernet backhaul as an option. According to TP-Link, the Deco XE75 Pro adds a 6 GHz band.

  • According to TP-Link, each Deco X50 node has three gigabit ports, which may be useful for a wired setup.
  • Advertised speed and coverage aren’t measurements of seminar-call performance in a particular home. The benefits of 6 GHz depend on your setup and having compatible devices.

ASUS

ASUS describes the ZenWiFi XD5 as a Wi-Fi 6 mesh system that supports older Wi-Fi generations and Ethernet backhaul.

  • Ethernet backhaul may be a good fit if you have Ethernet cabling between your mesh nodes.
  • According to ASUS, features such as 160 MHz channels may vary by country; Wi-Fi 6 features require compatible devices.

Linksys

Linksys describes the Velop Pro 6E as a tri-band system with 2.4, 5 and 6 GHz bands, and wireless or wired backhaul.

  • The listed bands and backhaul options may be useful if you have compatible 6 GHz devices or want to use wired nodes.
  • The 6 GHz band can only be used directly by compatible devices. Linksys’s claims about wide coverage and capacity aren’t independent measurements for a home in the Netherlands.

Mesh Wi-Fi at Joybuy

This selection includes TP-Link mesh systems with Wi-Fi 6 or Wi-Fi 6E for households with different Wi-Fi generations. Check that your devices support the bands you choose and that the exact model carries the correct CE marking. The RDI states that radio equipment must meet the applicable requirements.

TP-Link Deco X50 mesh system, 3-pack

TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6

May suit a home that needs several mesh nodes and has a mix of older and newer Wi-Fi devices.

3-pack; dual-band 2.4 GHz and 5 GHz; Wi-Fi 6 (802.11ax).

View at Joybuy
TP-Link Deco XE75 Pro mesh system, 3-pack

TP-Link Deco XE75 Pro (3-pack), tri-band Wi-Fi 6E

May suit you if you want to make use of the extra 6 GHz band with compatible devices.

3-pack; tri-band 2.4, 5 and 6 GHz; Wi-Fi 6E (802.11ax). The 6 GHz band can only be used directly by compatible devices.

View at Joybuy
TP-Link Deco XE75 mesh system, tri-band Wi-Fi 6E

TP-Link Deco XE75, tri-band Wi-Fi 6E, 3 antennas

May suit you if your network includes 6 GHz devices; check which devices can use the extra band.

Tri-band 2.4, 5 and 6 GHz; Wi-Fi 6E mesh (802.11ax); 3 internal antennas.

View at Joybuy
TP-Link Deco X50-PoE mesh system, 3-pack

TP-Link Deco X50-PoE (3-pack), dual-band Wi-Fi 6

May suit an installation where PoE and Ethernet ports work with your planned setup.

3-pack; dual-band 2.4 GHz and 5 GHz; Wi-Fi 6 (802.11ax); 2 Ethernet ports per node.

View at Joybuy
TP-Link Deco X50 mesh system, 2-pack

TP-Link Deco X50 (2-pack), dual-band Wi-Fi 6

May suit you if you need two mesh nodes and use a mix of older and newer Wi-Fi devices.

2-pack; dual-band 2.4 GHz and 5 GHz; Wi-Fi 6 (802.11ax).

View at Joybuy

Frequently asked questions

Should you buy mesh if your seminar call also cuts out next to the router?

Not until you’ve investigated the cause. If possible, test the call and connection using Ethernet, and check your calling device too. Google Meet Help recommends an Ethernet test if you’re having quality problems. Mesh Wi-Fi can’t fix a weak internet connection.

Where should you place wireless mesh nodes?

Place wireless nodes where they can still get a usable connection to the rest of the network. Use any available Ethernet cabling if you choose wired backhaul, and keep the software up to date. ACM ConsuWijzer highlights the importance of updates for your own network equipment.

Can older devices connect to Wi-Fi 6 or Wi-Fi 6E mesh?

Older devices can connect, but they won’t automatically get the benefits of Wi-Fi 6. A device without Wi-Fi 6E can’t use the 6 GHz band directly, so check the Wi-Fi capabilities of the devices you use during seminars. Consumentenbond explains the difference between older Wi-Fi generations and Wi-Fi 6.

What should you check on a mesh system’s CE marking?

Check that the exact model has the correct CE marking, and follow the installation and usage instructions. The Dutch Authority for Digital Infrastructure states that radio equipment must meet the applicable requirements; a brand name or online shop listing alone doesn’t confirm this for every model.

Can you use your own router or modem in the Netherlands?

According to ACM ConsuWijzer, you have the right to choose your own router and can usually choose your own modem too, although a provider may refuse unsafe or unsuitable equipment under the stated conditions. Ask for the necessary connection settings before replacing your equipment. Adding a mesh system behind your existing modem isn’t the same as replacing that modem.