Choose mesh Wi-Fi if the connection between your lounge and workspace is poor and both rooms need Wi-Fi. If the issue is caused by your settings or the position of your existing router, adjusting them or adding a wired access point may be enough. For Google Cast, the sending device and the screen need to be able to communicate over the local network. So also check your guest network and isolation settings, whether cabling is available, and how the system works with your existing router.
Who is mesh Wi-Fi for a lounge and workspace relevant to?
Teams sharing a screen
You want to show content on a screen in the lounge from your workspace. Check how the screen is discovered and whether the devices are allowed to communicate over the local network. Google’s guidance applies specifically to Google Cast.
Google Streaming Help explains the network requirements for Cast.
People using two busy rooms
You want to use Wi-Fi in both the lounge and workspace for things like video calls and streaming. So check the connection in both locations, where the equipment is positioned, and whether wired backhaul is an option.
TP-Link Netherlands explains Ethernet backhaul, while Consumentenbond offers general tips for improving Wi-Fi reception at home.
People managing shared access
You manage an existing router and Wi-Fi for visitors. Decide which users need to access the screen locally and which guests only need internet access.
Google and TP-Link provide guidance on Cast, guest networks and network isolation.
What should you look for when choosing?
First check whether the screen protocol requires the devices to communicate over the network. Then measure the connection in both rooms and work out whether running a cable between the mesh points is practical.
| What to consider |
What to look for when buying |
Who is this important for? |
| Accessing the screen in the lounge |
Find out which protocol the screen uses. For Google Cast, check that the devices are on the intended network and that client isolation isn’t blocking communication between them. |
If I want to use the shared screen from my workspace, my device needs to be able to find it on the local network. Around 36% of consumers put screen sharing first. |
| A reliable connection for work |
Measure the connection in your workspace and lounge while doing the activities you have in mind. Work out whether coverage, Wi-Fi or your internet connection is the limiting factor. |
For video calls and other work, I want to know whether the connection in my workspace will be reliable. Around 29% of consumers put their work connection first. |
| Coverage between the rooms |
Check whether you can run a cable, whether the model supports Ethernet backhaul, and which ports will still be available once the router and mesh points are connected. |
If one room is outside the usable range, I want to know whether an extra point can still get a good connection to the network there. Around 21% of consumers say coverage between rooms is their top consideration. |
| Restricted guest access |
Check how the guest network and local access work in the chosen operating mode, and test the settings with the screen protocol you’ll actually use. |
When visitors only need internet access, I want to keep their access separate without preventing authorised users from using the screen. Around 14% of consumers prioritise separate guest access. |
Common mesh Wi-Fi pitfalls
-
Assuming a guest network lets everyone control the screen
Client isolation can prevent devices from communicating with each other. For Google Cast, Google advises that the sending device and the screen should be able to communicate over the intended Wi-Fi network.
Decide in advance who needs local access to the screen, then test the settings with the screen protocol you’re using after installation.
-
Counting every Ethernet port as a spare
A port may already be needed to connect to the router or for wired backhaul.
Map out the connections for your router, mesh points, screen and work equipment before deciding how many ports you need.
Depending on your setup, you may need an extra switch or additional cabling.
-
Assuming the advertised coverage guarantees a connection in both rooms
Your actual connection depends on the location and any obstacles. Existing settings could also be causing the problem.
First measure the connection where you’ll use it, then decide where you need an extra point or cable.
Brands worth considering
TP-Link
Deco models are worth considering if you’re looking for mesh with access point mode, wired backhaul and connections in both rooms.
- TP-Link lists three gigabit ports per unit for the Deco X50 and provides details on Ethernet backhaul.
- In access point mode, the main router takes over tasks including assigning IP addresses. Available features and connections depend on the setup you choose.
ASUS
The ZenWiFi XD5 and BD4 offer different connection options for anyone exploring mesh with wired connections.
- ASUS documents Ethernet backhaul for the XD5, whose specifications list two gigabit ports per unit. For the BD4, ASUS lists two 2.5-gigabit ports.
- The port speed alone doesn’t prove that you need it for this setup. Also check which connections will remain available after the uplink or backhaul is connected.
FRITZ!
The FRITZ!Mesh Set 1700 is worth looking into if you want to use mesh alongside an existing router.
- FRITZ! says the set of three Repeaters 1700 can be used with a FRITZ!Box or another router.
- Before buying, check that the version and connection method are suitable for your existing network and shared screen.
Google
Nest Wifi Pro is a Wi-Fi 6E mesh option for extending coverage while continuing to use an existing Wi-Fi modem.
- Google says the system can be expanded with additional units.
- The stated range isn’t a measurement of your rooms. For Google Cast, check separately that the local network allows the necessary communication.
NETGEAR
The NETGEAR Orbi range also includes systems with extensive specifications for larger networks.
- NETGEAR positions the Orbi 970 series as a Wi-Fi 7 system with 10-gigabit connectivity.
- The series specifications don’t show that you need them for two shared rooms. Choose a system based on your measured connection and the connections you need.
Joybuy products for mesh Wi-Fi in shared spaces
These products are mesh Wi-Fi options for setups that need coverage across several rooms. Check that each model’s connections and operating mode suit your network. The Dutch Authority for Digital Infrastructure says that equipment placed on the market in Europe must meet the applicable requirements and carry a CE mark. Check the marking and documentation for the version actually supplied.
No image available
TP-Link Deco BE68 (2-pack)
A two-pack mesh set for placing Wi-Fi points across two rooms. Check that the listed ports suit the cabling you plan to use.
The product description lists wired and wireless backhaul, along with 10 Gbps, 2.5 Gbps and 1 Gbps ports on each unit.
View on Joybuy
No image available
TP-Link Deco M4 (3-pack)
This set of three mesh stations is designed to provide Wi-Fi across several rooms. Check that the placement and wired connections suit your network.
The product specifications list dual-band Wi-Fi 5 and two gigabit ports per unit.
View on Joybuy
No image available
TP-Link Deco X50-PoE (2-pack)
A two-pack mesh system for a two-point setup. PoE power is listed as an option, so check that it suits your installation.
The product specifications list Wi-Fi 6, PoE support and two Ethernet ports per unit.
View on Joybuy
No image available
TP-Link Deco XE75 (3-pack)
This set of three mesh units is designed to provide Wi-Fi across several rooms. Position them according to the connection in the places where you’ll use them.
The product specifications list tri-band Wi-Fi 6E, guest access and three gigabit ports per unit.
View on Joybuy
No image available
TP-Link Deco X50 (2-pack)
A two-pack mesh set for coverage across several rooms. The product specifications list Ethernet backhaul as an option if you can run a cable between the points.
The specifications list dual-band Wi-Fi 6 and three gigabit ports per unit. Check which ports will remain available once the backhaul is connected.
View on Joybuy
Frequently asked questions
Why doesn’t a screen with Google Cast appear when both devices have Wi-Fi?
Google advises that the sending device and the Cast screen should be on the intended Wi-Fi network, and that AP or client isolation shouldn’t block communication between them. Check the settings on both devices and the network. Other screen protocols may have different requirements.
Can a Deco set be installed behind an existing router?
Yes. TP-Link documents an access point mode for Deco. In this mode, the main router manages tasks including IP addresses, and some Deco router features aren’t available. Check the connection setup and the features you need.
Does every mesh point need to be connected by cable?
No. Wired backhaul only applies to mesh points that are actually connected by cable. TP-Link describes Ethernet backhaul for Deco. Check how the points need to be connected in the operating mode you choose.
What rules apply to mesh Wi-Fi equipment in the Netherlands?
According to the Dutch Authority for Digital Infrastructure, products placed on the market in Europe must meet the applicable requirements and carry a CE mark. Check the marking and documentation for the version actually supplied; the model name alone doesn’t confirm this.
What are my rights if a set I bought online isn’t suitable?
ACM ConsuWijzer says that eligible online purchases generally come with a statutory cooling-off period of up to 14 days after delivery. Statutory guarantee rights also apply: if a product breaks sooner than you could reasonably expect with normal use, the seller must put it right. Check the terms that apply to your specific purchase.