Who is this setup for?

A family with poor Wi-Fi in the hobby room

Wants to know where an extra Wi-Fi node could go and whether the rooms can be connected without a network cable.

A family with a cable between the rooms

Wants to use the existing cable to connect the Wi-Fi nodes and devices in the hobby room.

A family with challenging walls or floors

Can’t use a cable and wants to find out whether a connection over the home’s electrical wiring is suitable.

What should you look for when choosing?

First decide how the Wi-Fi nodes will connect to each other. The number of nodes and Wi-Fi generation come next.

Ethernet backhaul

When to choose it: If there’s a network cable between the rooms or one can be installed. TP-Link lists Ethernet backhaul as an option for the Deco X50, and ASUS describes this setting for the ZenWiFi XD5.

What to consider: You’ll need a suitable cable route. Also check how many ports will be left free on each node once everything is connected.

Fully wireless mesh

When to choose it: If cabling isn’t practical and you can position a Wi-Fi node where it still gets a good signal from the other node.

What to consider: Obstacles and the distance between nodes can affect the connection. The Dutch Consumers’ Association advises minimising obstacles and ideally having no more than two rooms between nodes.

Powerline backhaul

When to choose it: If there’s no suitable cable route and walls or floors make a wireless connection difficult, a compatible mesh system that uses your home’s electrical wiring may be an alternative.

What to consider: The connection depends on your home’s electrical installation. TP-Link says the Deco PX10’s powerline backhaul works with compatible Deco nodes, not necessarily with every Deco product or standalone powerline adapter.

What to consider What should you check? Who is this important for?
Connection between the rooms Compare possible node positions with Ethernet backhaul and, where suitable, powerline backhaul. Check that the intermediate node can get a good connection of its own. If the hobby room has poor Wi-Fi, I want to know whether the node there will stay connected to the network. Around 40% of consumers put coverage between rooms at the top of their buying priorities.
Wired devices For each node, count the ports that will remain free after connecting the router and any Ethernet backhaul. If you want to connect a computer or other devices by cable in the hobby room, you’ll need enough free ports. Around 23% of consumers prioritise useful Ethernet ports.
Using devices at the same time Check which Wi-Fi generation your devices support and how the nodes connect to each other. A quoted combined speed doesn’t measure the connection in your rooms. If people will be working or studying in the study nook and hobby room at the same time, I want to know whether the setup suits those devices. Around 23% of consumers prioritise simultaneous use.
Management and ongoing costs Check how the system works with your existing router, which management features are included and whether the version you choose requires a subscription. If you want to manage your family’s Wi-Fi, it helps to know how easy the system is to set up and which features are available. Around 14% of consumers give management and costs top priority.

Common buying mistakes

  • Buying an extra node without checking where it will go

    A node in the hobby room won’t help if it can’t get a usable connection to the other node.

    First work out where the nodes can go and whether Ethernet between the rooms is an option.

    An unsuitable position could mean you still need an extra node or a cable route.

  • Assuming the quoted speed is the speed you’ll get in the hobby room

    Figures such as AV1000 or AX3000 don’t automatically tell you what connection speed you’ll get in your home at the chosen location.

    Use these figures to compare versions, then check the connection between the nodes once the system is installed.

  • Confusing the manufacturer’s guarantee with your statutory rights

    A commercial manufacturer’s or seller’s guarantee is separate from your statutory rights. The Netherlands Authority for Consumers and Markets’ ACM ConsuWijzer service points out that the seller may be responsible for providing a suitable solution if a product breaks sooner than you could reasonably expect under normal use. This depends on the product and the circumstances.

    First check which statutory rights apply, then compare any additional commercial cover.

Brands to compare

TP-Link

The Deco X50 is a Wi-Fi 6 mesh option with Ethernet backhaul; the Deco PX10 also offers powerline backhaul.

  • TP-Link lists three gigabit ports per node for these models.
  • The PX10’s powerline backhaul depends on compatible models and won’t necessarily work with other Deco products or standalone powerline adapters. Theoretical speed and coverage figures aren’t measurements taken in your home.

ASUS

The ZenWiFi XD5 is a Wi-Fi 6 mesh range to compare if Ethernet between nodes is an option.

  • ASUS explains how to set up Ethernet backhaul and choose between one network name or separate names for each frequency band.
  • ASUS says 160 MHz on 5 GHz may not be available in some regions. Check the version and applicable settings.

FRITZ!

According to FRITZ!, the FRITZ!Mesh Wi-Fi Set 1700 is a two-unit Wi-Fi 7 system that can also be used with a router from another brand.

  • FRITZ! lists guest access, parental controls and automatic updates for the system.
  • The Wi-Fi 7 label alone doesn’t prove that this system will perform better in these rooms than a suitable Wi-Fi 6 setup. Check that it will also work with your existing router.

devolo

The WiFi 7 Mesh BE6500 2-Pack is a two-node system with wired connections for devices.

  • devolo lists one 2.5 Gbit/s port and three gigabit ports, and says the system supports an existing router.
  • Check the specifications for the version you choose before assuming it supports 6 GHz.

Joybuy products

These Joybuy products are mesh Wi-Fi systems to compare for connecting rooms, with different numbers of nodes, wired options and Wi-Fi generations.

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-pack

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-pack

Suitable for a setup where you want Ethernet backhaul; the product description lists two Deco X20 nodes.

Wi-Fi 6; 2-node set.

View at Joybuy
TP-Link Deco X50 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50 3-pack, dual-band Wi-Fi 6

Suitable for a setup with Ethernet backhaul; check how many ports will be free on each node once everything is connected.

3-node set; three gigabit ports per node; optional Ethernet backhaul.

View at Joybuy
Linksys Velop Pro 7 tri-band mesh, 2 nodes

Linksys Velop Pro 7 tri-band mesh, 2 nodes

A good option to compare if you’re looking for a two-node mesh system with Wi-Fi 7.

Tri-band: 2.4 GHz, 5 GHz and 6 GHz; Wi-Fi 7; two nodes.

View at Joybuy
ASUS ZenWiFi BT10, 2-pack, tri-band Wi-Fi 7

ASUS ZenWiFi BT10, 2-pack, tri-band Wi-Fi 7

A good option if you’re looking for a two-node mesh system with tri-band Wi-Fi 7. Check which features and connections your setup needs.

2-node set; tri-band: 2.4 GHz, 5 GHz and 6 GHz; Wi-Fi 7.

View at Joybuy
TP-Link Deco X50-PoE, 2-pack, dual-band Wi-Fi 6

TP-Link Deco X50-PoE, 2-pack, dual-band Wi-Fi 6

Suitable for a wired setup where you want PoE; check that this type of connection is right for your home.

2-node set; dual-band Wi-Fi 6; PoE support; two Ethernet ports per node.

View at Joybuy

Frequently asked questions

Can I put the second Wi-Fi node straight in the hobby room?

Yes, if it can still get a usable connection to another node there. For wireless placement, the Dutch Consumers’ Association advises minimising obstacles and ideally having no more than two rooms between nodes. Try an intermediate position if needed. This is positioning advice, not a guarantee of coverage.

Can a Deco system connect to my existing router entirely wirelessly?

No. TP-Link says the main Deco must be connected by Ethernet cable to the modem, router or internet connection. Satellite nodes within the Deco network can then connect wirelessly. In access point mode, your existing router can continue to manage the network.

Will a PX10’s powerline connection work with any other powerline adapter?

No. TP-Link says the PX10’s powerline backhaul works with compatible Deco nodes that use the same powerline standard, but not necessarily with standalone powerline adapters. After installation, check in the Deco app that the powerline backhaul is connected.

Do I need a frequency licence or registration for ordinary home Wi-Fi in the Netherlands?

According to the Dutch Authority for Digital Infrastructure (Rijksinspectie Digitale Infrastructuur), Wi-Fi is licence-exempt when used under the applicable conditions, with no notification or registration required. Make sure your equipment is set to the correct country and frequency settings.

Does a two-year manufacturer’s guarantee mean my Dutch statutory guarantee ends after that?

No. The ACM ConsuWijzer service distinguishes between a manufacturer’s or seller’s guarantee and your statutory rights. If a product breaks sooner than you could reasonably expect under normal use, the seller may be responsible for providing a suitable solution. This depends on the product and the circumstances.