Who should consider mesh Wi-Fi?

Groups with interrupted work sessions

If several people are working on a project at the same time, first work out whether the problem is with your internet connection or the Wi-Fi where you’re working. The Consumers’ Association (Consumentenbond) recommends testing your internet connection using a computer connected by cable.

Renters with a weak Wi-Fi zone

If you regularly work outside the modem router’s good coverage area, try moving the router first. An extra node is only worth considering if the connection at your project spot is still inadequate; don’t assume you can drill holes or install fixed cabling.

Organisers giving visitors access

If you want to give your group Wi-Fi access, check whether the model you’re considering offers a guest network and which security settings are supported by the router and connected devices.

What should you look for when choosing?

Improve your existing modem router

Choose this if: a wired test points to a problem with your internet connection, or moving the router has already improved your Wi-Fi.

The trade-off: you avoid an unnecessary purchase, but a persistent weak Wi-Fi zone may remain.

Two-node mesh system

Choose this if: you need a second node to reach your project spot and can place both nodes somewhere suitable.

The trade-off: the extra node needs power, and the wireless connection between the nodes will still depend on their position and any obstacles.

Mesh with Ethernet backhaul

Choose this if: you already have a suitable Ethernet connection or can run a separate cable easily.

The trade-off: you’ll need to run a cable; check whether this is practical in your rented home.

Extend your FRITZ! set-up

Choose this if: you already use a compatible FRITZ!Box and want to improve a weak spot.

The trade-off: the mesh features described apply to a FRITZ!Box set-up; check the available connections too.

First work out whether the problem is with your internet connection or your Wi-Fi coverage. Then choose a solution and the number of nodes you need.

What to consider What to look for Who is this most relevant to?
Working as a group at the same time Test the connection using a cable first, then compare the Wi-Fi at your project spot and while you’re working. If several people are working online at the same time, I want to know where the interruptions are happening; around 40% of consumers prioritise a reliable connection for group work.
Coverage where you’re working Try moving the modem router; assess whether an extra node would work in between and whether there’s a power socket available. If I’m working just outside the good coverage area, I want to reach my project spot without making permanent changes to the rented home; around 30% of consumers prioritise coverage where they work.
Guest access and security Check whether the exact model offers a guest network and which security settings are supported by both the router and the devices. When I give temporary group members Wi-Fi access, I want to be able to manage access and security carefully; around 20% of consumers say visitor access is their main consideration.
Keeping equipment to a minimum Compare improving your existing set-up with the smallest system that solves the problem you’ve measured, and factor in power use. When I’m setting up a small home, I don’t want to add nodes that won’t help solve the problem; around 10% of consumers prioritise avoiding unnecessary equipment.

Common buying mistakes

  • Buying a system before finding out what’s causing the problem

    A slow internet connection and a weak local Wi-Fi signal are two different possible causes. A mesh system won’t fix a problem with the connection provided by your internet service provider.

    First, test the connection using a computer connected by cable, then check the Wi-Fi where the group is working.

  • Relying on the stated coverage area

    Distance, walls and placement all affect coverage; a stated coverage area doesn’t guarantee a usable signal throughout your home.

    Choose the number of nodes you need based on where your connection is inadequate, not just what the packaging says.

  • Assuming similar model names mean the same specification

    The Deco X50 and Deco X50-PoE differ in areas including power supply and port configuration.

    Check the full model name, pack size, power supply and connections for the version you’re choosing.

  • Confusing the manufacturer’s warranty with your legal rights

    According to the Dutch Government, a manufacturer’s warranty doesn’t replace your legal rights. There is no fixed statutory warranty period in the Netherlands; if a product is faulty, contact the retailer.

    Keep your proof of purchase and warranty terms, and contact the retailer if you have a problem.

Brands to compare

TP-Link

The Deco X50 range is an option if your measurements show that you need extra Wi-Fi coverage; it’s available in different pack sizes.

  • TP-Link lists three gigabit ports per node for the Deco X50, optional Ethernet backhaul and set-up through the Deco app.
  • Claimed coverage and speed aren’t measurements taken in your home. Note the difference between the X50 and X50-PoE.

ASUS

The ZenWiFi XD5 is worth considering if you can connect mesh nodes through an existing Ethernet connection.

  • ASUS describes Ethernet backhaul and set-up through the Router app.
  • You’ll need compatible devices to reach the stated speed. ASUS also notes that 160 MHz may be restricted in some regions; these features apply to the XD5.

FRITZ!

The FRITZ!Repeater 1200 AX is most relevant as an addition to a compatible existing FRITZ!Box set-up.

  • The manufacturer lists mesh integration with a FRITZ!Box and one gigabit LAN connection.
  • Using it with another router doesn’t automatically mean the same integrated mesh features will be available.

NETGEAR

The Orbi RBK352 is a two-piece Wi-Fi 6 system with a separate router and satellite.

  • NETGEAR identifies the RBK352 as a set with an RBR350 router and an RBS350 satellite.
  • The product configuration doesn’t prove a performance advantage or suitability for every rented home.

Joybuy products

This selection includes TP-Link Deco mesh systems with two or three nodes, including the X50, X50-PoE and XE75 Pro. Compare the pack size and connections with where you work and the type of installation that’s practical in your home.

TP-Link Deco X50-PoE mesh system with two nodes

TP-Link Deco X50-PoE (2-pack)

Suitable for a two-node set-up if PoE power works with your installation.

Dual-band Wi-Fi 6; PoE support; two Ethernet ports per node; WPA3.

View at Joybuy
TP-Link Deco X50 mesh system with two nodes

TP-Link Deco X50 (2-pack)

A two-node option if your measurements show that you need an extra node; Ethernet backhaul is optional.

Dual-band Wi-Fi 6; three gigabit ports per node; OFDMA and MU-MIMO.

View at Joybuy
TP-Link Deco X50 mesh system with three nodes

TP-Link Deco X50 (3-pack)

Consider this pack size only if the placement and the problem you’ve measured justify three nodes; one may be unnecessary in a compact home.

Dual-band Wi-Fi 6; three gigabit ports per node; OFDMA and MU-MIMO.

View at Joybuy
TP-Link Deco XE75 Pro mesh system with three nodes

TP-Link Deco XE75 Pro (3-pack)

This three-node system is suitable only if your placement needs justify this pack size; check in advance that you’ll need all the nodes.

Tri-band Wi-Fi 6E; 2.4, 5 and 6 GHz bands; guest access and WPA3.

View at Joybuy
TP-Link Deco X50-PoE mesh system with three nodes

TP-Link Deco X50-PoE (3-pack)

A three-node option if your home and measured coverage needs call for it; also check whether PoE works with your installation.

Dual-band Wi-Fi 6; PoE support; two Ethernet ports per node; WPA3 and guest access.

View at Joybuy

Frequently asked questions

Should you upgrade your broadband package first if video calls keep dropping out?

Not before you’ve investigated the cause. Test your internet speed using a computer connected by cable, then check the Wi-Fi at your work spot separately; mesh Wi-Fi won’t fix a problem with the connection provided by your internet service provider.

How should you position mesh nodes in a rented home?

First, try moving your existing modem router and test again. If you need a second node, place it somewhere it can still get a good connection. Use Ethernet backhaul only if running a cable is practical; don’t assume you’ll need to drill holes.

How can you keep Wi-Fi secure for a weekend group?

After installation, check which Wi-Fi security settings are in use, and use a guest network if your chosen model offers one. WPA3 only works if both the router and the connected device support it; keep your equipment’s firmware up to date too.

Does Wi-Fi equipment in the Netherlands need a CE mark?

According to the Dutch Authority for Digital Infrastructure, radio equipment placed on the market in the Netherlands must meet the relevant European requirements and carry a CE mark. Check the information for the exact model; a general manufacturer page alone doesn’t confirm that the item you receive carries the mark.

What warranty rights apply to Wi-Fi equipment?

According to the Dutch Government, you’re entitled to a product that works properly, and there is no fixed statutory warranty period in the Netherlands. A manufacturer’s warranty is in addition to your legal rights; if a product is faulty, contact the retailer.