Who is this choice relevant to?

Reading outside the router’s range

You download magazines in a bedroom, in the loft or behind walls that interfere with the signal, and want to find out whether you need to move the router or add a Wi-Fi point. The Consumers’ Association highlights placement and obstacles as factors to consider when troubleshooting Wi-Fi problems.

A household with old and new devices

You use phones, tablets and laptops from different generations, and want them all to connect to the same network without assuming every device supports Wi-Fi 6E. The Consumers’ Association and TP-Link explain that older Wi-Fi devices don’t automatically gain the capabilities of newer Wi-Fi standards.

A family using the internet at the same time

You want to download magazines while other members of your household are online, and assess your internet connection, the link between mesh points and your devices separately. The Consumers’ Association recommends a wired speed test to distinguish your internet connection from Wi-Fi.

What should you look for in mesh Wi-Fi?

Don’t just focus on the Wi-Fi standard: coverage where you read, the connection between mesh points and your existing router all help determine which setup is right for you.

Improve your existing Wi-Fi first

Choose this if: your wired connection works well and moving the router to a better spot already reaches your reading areas.

Trade-off: moving the router may not cost anything, but it won’t always solve weak coverage behind floors or walls.

Dual-band Wi-Fi 6 mesh

Choose this if: you need coverage in several rooms and your devices mainly use Wi-Fi 5 or Wi-Fi 6.

Trade-off: when the points are connected wirelessly, the link between them also uses wireless capacity; a compatible network cable may be an alternative.

Tri-band mesh

Choose this if: you can’t connect the points by cable and simultaneous use puts a strain on the wireless connection between rooms.

Trade-off: compare the bands and ports on the exact models. A 6GHz band won’t automatically help older devices, and the port details for the Deco XE75 Pro differ between listings.

Extend an existing FRITZ! mesh

Choose this if: you already have a suitable FRITZ!Box as your mesh hub and mainly want to extend coverage to another reading area.

Trade-off: a standalone repeater isn’t a replacement for a complete mesh system; check whether you’ll connect it via Wi-Fi or a network cable.

What to consider What should you look for? Who is this most relevant to?
Coverage where you read Test Wi-Fi where you read and check whether you can place extra points there. If I download magazines in the loft or behind walls, I want to know whether the signal reaches those areas. Around 29% of consumers cite coverage as their main concern.
Different reading devices Check the Wi-Fi standard and frequency bands used by your own devices; an older device won’t automatically gain Wi-Fi 6E capabilities. If you use older and newer phones, tablets or laptops together, you’ll want to avoid choosing a band that your devices don’t support. Around 23% of consumers cite compatibility as their main concern.
Using the internet at the same time Assess your internet connection separately from the wireless link between points, and check whether a wired connection is possible. If I download while other members of my household are online, I want to know where the slowdown is happening. Around 18% of consumers prioritise simultaneous use.
Existing provider router Check which router or access point mode suits your setup and which features the exact model offers in that mode. If you want to keep your provider’s router, you’ll want to understand in advance how the mesh system connects to it. Around 18% of consumers cite setting it up alongside their existing router as their main concern.
Security and aftercare Check the update and security options, and compare any manufacturer’s warranty with your statutory rights; ACM ConsuWijzer explains these rights. If I mainly want reassurance about updates and help if something goes wrong, I want to check the terms in advance. Around 12% of consumers cite security and aftercare as their main concern.

Pitfalls to avoid when choosing

  • Buying a mesh system before checking what’s causing the problem

    Extra Wi-Fi points won’t make a slow internet connection faster. The Consumers’ Association recommends testing your internet connection via a cable and comparing it with Wi-Fi where you read.

    Test your connection by cable first, then in the places where you read. If necessary, try moving the router before choosing extra points.

  • Mistaking the combined band speed for download speed

    Advertised band speeds don’t tell you the download speed you’ll get on a single tablet. The usable connection also depends on your device and the conditions.

    Compare what your devices support and the speed of your internet connection with the link used between the mesh points.

  • Choosing access point mode without checking the features

    Available features can vary by mesh model and network mode. As a result, your chosen setup may work differently from what you expect.

    Check which device will remain as the router and which features the exact mesh model retains in that mode.

  • Assuming a retailer’s description matches the Deco XE75 Pro specifications

    TP-Link lists a 2.5 Gbps connection for the Deco XE75 Pro, while the Joybuy description lists three gigabit ports per unit.

    Before buying, ask for confirmation of the port configuration for the exact version.

Relevant brands to compare

TP-Link

The Deco X50 is a dual-band Wi-Fi 6 model; according to TP-Link, the Deco XE75 Pro adds a 6GHz band. Focus your comparison on the devices in your home and the connection between the mesh points.

  • TP-Link lists optional Ethernet backhaul and three gigabit ports per unit for the Deco X50.
  • TP-Link lists a 2.5 Gbps connection for the Deco XE75 Pro, while the Joybuy description lists three gigabit ports per unit. Check the port configuration for the exact version.
  • Advertised coverage and capacity are manufacturer claims, not measurements taken in your home.

ASUS

The ASUS ZenWiFi XT9 is a tri-band Wi-Fi 6 model with router and access point modes. This makes the network mode and the link between points important factors to compare.

  • ASUS lists two 5GHz bands, a 2.5 Gbps WAN connection and gigabit LAN connections.
  • ASUS warns that 160MHz bandwidth may not be available everywhere due to regional restrictions; advertised band speeds aren’t guaranteed download speeds.

FRITZ!

The FRITZ!Repeater 3000 AX is an option for extending an existing FRITZ! mesh with a suitable FRITZ!Box.

  • FRITZ! lists three radio bands, two gigabit LAN connections and the option to connect the repeater via LAN.
  • A standalone repeater isn’t a replacement for a complete mesh system; check which router and other equipment you already use.

Joybuy products

These products are mesh systems designed to provide Wi-Fi in multiple areas, ranging from Wi-Fi 5 and Wi-Fi 6 models to a tri-band Wi-Fi 6E system. Check the EU conformity information for the exact version. The European Commission explains that the CE marking represents the manufacturer’s declaration; its presence alone does not mean the product has been independently checked.

TP-Link Deco E4 mesh system, three units, dual-band Wi-Fi 5

TP-Link Deco E4 (3-pack) Dual-band Wi-Fi 5 (2,4 GHz/5 GHz)

An option for using Wi-Fi in several areas where you read, with devices that connect via 2,4 or 5 GHz.

The set includes three units and is listed as dual-band Wi-Fi 5. According to the product information, its wired network ports have a maximum speed of 100 Mbps.

View at Joybuy
TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-pack

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System (2-pack)

An option if you’re looking for a two-unit mesh system with Wi-Fi 6 to provide coverage in different areas.

The product name specifies a 2-pack and Wi-Fi 6.

View at Joybuy
TP-Link Deco X50 mesh system, three units, dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack) Dual-Band Wi-Fi 6

An option if you want Wi-Fi 6 coverage in several areas and may be able to connect the mesh points by cable.

The set includes three units and uses dual-band Wi-Fi 6. TP-Link lists optional Ethernet backhaul and three gigabit ports per unit.

View at Joybuy
TP-Link Deco X50-POE mesh system, two units, dual-band Wi-Fi 6

TP-Link Deco X50-POE (2-pack) Dual-Band Wi-Fi 6

An option if you’re looking for a two-unit Deco X50-POE set to provide Wi-Fi in several areas.

The product name specifies PoE and dual-band Wi-Fi 6.

View at Joybuy
TP-Link Deco XE75 Pro mesh system, three units, tri-band Wi-Fi 6E

TP-Link Deco XE75 Pro (3-pack) Tri-Band Wi-Fi 6E

An option if you’re looking for a tri-band mesh system for several areas and have devices that support the 6GHz band.

The set includes three units and lists 2,4, 5 and 6 GHz. Check the Ethernet port configuration: TP-Link lists a 2.5 Gbps connection, while the Joybuy description lists three gigabit ports per unit.

View at Joybuy

Frequently asked questions

How can you tell whether mesh Wi-Fi will help with your downloads?

First, compare a speed test using a network cable with Wi-Fi where you read. If your wired connection is consistently slow too, investigate your internet connection first; extra Wi-Fi points won’t make it faster.

Can you connect a mesh system to your existing provider router?

That depends on the mode you choose and the connections available. In access point mode, your existing router continues to manage the network. Check which mesh features remain available on the exact model and how the points connect.

Do all reading devices need to support Wi-Fi 6E?

No. Older Wi-Fi standards can connect to compatible systems, but a device without 6GHz support won’t use that band for a direct device connection. Check the specifications of your own devices.

What if a mesh point stops working soon after you buy it?

In the Netherlands, if a product doesn’t do what you could reasonably expect, you have statutory rights when using it normally. ACM ConsuWijzer explains that the seller is responsible; any manufacturer’s warranty offered doesn’t automatically limit your statutory rights.

What product information is relevant when buying in the Netherlands?

Check the EU conformity information and the required CE marking for the exact version. The European Commission explains that the marking represents the manufacturer’s declaration; a CE reference in a retailer’s description is not, by itself, an independent check of a specific item.