Who is mesh Wi-Fi for project files suitable for?

Sharing large local files

You work with project files stored on a computer or NAS at home and want to know whether cables to your workspace and between mesh points matter more than a higher Wi-Fi class. Tweakers and the Consumentenbond cover both wired and wireless network performance.

Working from home beyond the router’s range

Your workspace is on another floor or behind walls. You’re looking for better coverage, but don’t want to assume that adding mesh points will automatically speed up file transfers. The Consumentenbond measures Wi-Fi performance in different locations and at different distances.

Working from home with files to keep private

You share files on your local network and want to keep guest devices separate without blocking access for your own work devices. Synology Knowledge Centre explains the settings for guest network access; VeiligInternetten recommends, among other things, changing default passwords.

What should you look for when choosing?

Mesh with wired backhaul

Choose this if: network cables are already in place between workspaces or floors.

Keep in mind: you’ll need cables and the right connection for each mesh point. In Tweakers’ BD4 test, wired points performed better than wireless ones.

Mesh with wireless backhaul

Choose this if: running cables isn’t practical and your main concern is a weak Wi-Fi signal in your workspace.

Keep in mind: the connection between the points still matters. Tweakers measured lower performance with wireless than wired backhaul on the dual-band ASUS BD4.

Wired workspace

Choose this if: a desktop computer or NAS handles lots of local files, or one workspace already has a network connection.

Keep in mind: a cable can bypass the wireless link for connected devices, but it won’t automatically provide Wi-Fi coverage in other rooms.

The Consumentenbond tests Wi-Fi and wired connections. Tweakers’ ASUS BD4 test shows why the backhaul setup matters when comparing systems.

What to consider What to check before buying Who should pay particular attention?
Local file transfers Check whether your computer and NAS can connect via Ethernet and how many ports will be available on each point. If you transfer files between your work computer and NAS, you’ll want to know whether the entire connection can be wired. Around 36% of consumers prioritise local file transfers.
Coverage in your workspace Map out where the signal is weak and compare measurements with both wireless and wired connections between the points. Your workspace is further from the router or behind walls, so coverage there is your first concern. Around 29% of consumers prioritise coverage in their workspace.
Access to shared files Check whether work devices can communicate on the intended local network, and review the settings for guest access, updates and passwords. You want to keep your work files private from visitors while still giving your own devices access. Around 21% of consumers prioritise controlled access to shared files.
Connection to your existing router Check whether the system can operate in access point mode and whether the required connections are available. You want to keep using your existing router and know in advance which connections your setup needs. Around 14% of consumers prioritise easy integration and suitable equipment.

Mesh Wi-Fi pitfalls when working with project files

  • Assuming the Wi-Fi class tells you the file transfer speed

    Transfer speeds also depend on the connection between mesh points, the available Ethernet ports and the devices at either end. Tweakers measured different performance on the ASUS BD4 with wired and wireless backhaul.

    Compare measurements from a setup you can use at home, and check the connections on both the mesh point and your computer or NAS.

  • Putting a NAS or work laptop on an isolated guest network

    Guest access settings can restrict communication with devices on the local network, which may prevent a work device from reaching your file storage.

    Use the intended local network for devices that need to share files with each other. Keep guest access separate.

  • Assuming similar Deco versions have the same connections

    According to TP-Link, the standard Deco X50 has three gigabit ports per point. The separate X50-PoE version has different connection specifications.

    Check the full model name, pack size and ports on the exact version before choosing.

  • Focusing only on the mesh points themselves

    Wired backhaul needs a suitable cable route, and the selected operating mode determines how the points connect. Multiple points also stay switched on and use power.

    Check how to connect the exact model in router or access point mode, and take power consumption into account when planning your setup.

Brands to consider

TP-Link

The Deco X50 is a Wi-Fi 6 option with three gigabit ports per point. The Deco BE25 is worth considering if you’re looking for two 2.5G ports and Wi-Fi 7.

  • TP-Link lists several pack sizes for these models.
  • The X50 has gigabit ports, while the BE25 is dual-band. If you’re placing the points wirelessly, consider the connection between them; the stated radio speed isn’t the same as file transfer speed.

ASUS

The ZenWiFi BD4 is worth considering if you need 2.5G ports, access point mode and the option of wired backhaul.

  • ASUS specifies two 2.5G ports and access point mode for the BD4.
  • In Tweakers’ test, the 3-pack performed differently with wireless and wired backhaul. This test result won’t necessarily apply to every setup.

FRITZ!

The FRITZ!Mesh Set 1700 is worth considering if you want to add mesh to an existing router.

  • FRITZ! says the set can connect to an existing router via LAN and features automatic updates.
  • These manufacturer specifications aren’t an independent measurement of file transfer speeds. Check the exact version and its connection options for your network.

NETGEAR

The Orbi RBK763S is a tri-band Wi-Fi 6 model worth considering if your mesh points need to communicate wirelessly.

  • NETGEAR specifies a dedicated backhaul for this model and seven gigabit ports across the set.
  • The stated total wireless speed isn’t a measured speed for a local file transfer.

Joybuy products for a home office

These mesh systems are designed to provide Wi-Fi coverage at home. For project files, also check the number of mesh points and the wired connections on the exact version.

TP-Link Deco M4 3-pack mesh Wi-Fi system

TP-Link Deco M4 (3-pack), Wi-Fi 5

This three-station set is an option if you need Wi-Fi coverage in several rooms.

Wi-Fi 5 (802.11ac); two Ethernet ports per unit.

View at Joybuy
TP-Link Deco X50 3-pack mesh Wi-Fi system

TP-Link Deco X50 (3-pack), Wi-Fi 6

The three mesh points and Ethernet ports could suit a setup with several workspaces and wired devices.

Wi-Fi 6 (802.11ax); three gigabit Ethernet ports per unit; Ethernet backhaul supported.

View at Joybuy
ASUS ZenWiFi BT10 2-pack mesh Wi-Fi system

ASUS ZenWiFi BT10 (2-pack), Wi-Fi 7

This mesh system is worth considering if you want two mesh points and tri-band Wi-Fi.

Tri-band (2,4 GHz, 5 GHz and 6 GHz); Wi-Fi 7 (802.11be).

View at Joybuy
TP-Link Deco XE75 Pro 3-pack mesh Wi-Fi system

TP-Link Deco XE75 Pro (3-pack), Wi-Fi 6E

This three-unit set is an option if you’re looking for coverage across several mesh points.

Tri-band (2,4 GHz, 5 GHz and 6 GHz); Wi-Fi 6E (802.11ax).

View at Joybuy
TP-Link Deco XE75 mesh Wi-Fi system with three nodes

TP-Link Deco XE75, Wi-Fi 6E, 3 nodes

This three-node set is an option if you want to cover several rooms with mesh points.

Tri-band (2,4 GHz, 5 GHz and 6 GHz); three gigabit Ethernet ports per unit.

View at Joybuy

Frequently asked questions

Will a faster broadband package speed up local project files?

Not necessarily. If devices exchange files over your home network, first check their local connection and the connection between any mesh points. An internet speed test doesn’t measure that entire route directly; the Consumentenbond measures Wi-Fi and wired performance separately.

Can you install a mesh system behind your existing broadband router?

It depends on the system and the mode you choose. ASUS lists an access point mode for the ZenWiFi BD4, and TP-Link provides separate connection diagrams for Deco in router and access point modes. Check the manual for the exact model before connecting any cables.

Why can’t your laptop on the guest network access the NAS?

A guest network can restrict access to the local network. Check that your laptop is connected to the intended network and that local access is allowed. The setting described by Synology applies to its own routers and won’t necessarily be the same for every brand.

What should you know about power consumption and warranties?

Multiple mesh points usually stay switched on, so check the power consumption of the entire setup. ACM ConsuWijzer distinguishes between statutory and additional warranties offered by a retailer or manufacturer. If a product is faulty, contact the retailer about your statutory warranty.

Can you use your own router in the Netherlands?

According to ACM ConsuWijzer, you can generally choose your own modem or router as long as it meets the applicable requirements; a provider can refuse an unsafe device. The Radiocommunications Agency Netherlands sets out requirements for radio equipment and additional cyber security requirements that have applied since 1 August 2025. This doesn’t confirm that any specific model on sale complies.