First, test your internet connection using a cable and compare the result with the Wi-Fi at your workstations. The Dutch Consumers' Association recommends using a wired connection for a speed test. Mesh can improve weak Wi-Fi coverage indoors, but it won’t increase the upload speed of your broadband package. Where possible, connect mesh nodes using a cable, and set access permissions for project files separately in the file-sharing service you use.
Who should consider mesh Wi-Fi for project files?
Teams uploading large files at the same time
These teams want to find out whether delays occur during the internet upload or on the wireless network before buying a mesh system. The Dutch Consumers' Association cites working from home at the same time and sending large files as situations where upload speed matters.
Users working in different locations
These users have patchy Wi-Fi coverage in different rooms or on different floors. They want to find out whether mesh nodes, potentially connected by cable, can reach their workstations.
Managers of a shared work network
These managers may want to keep their existing router and access settings. The file-sharing service separately controls who can view or edit shared files, as Microsoft explains for OneDrive.
What should you look for in mesh Wi-Fi for project files?
| What to consider |
What should you check? |
Who is this most important for? |
| Upload speed and troubleshooting |
Compare a wired speed test with the Wi-Fi at your workstation, and check your package’s upload speed. |
If I want to know whether the internet connection or Wi-Fi is slowing down transfers, I’ll start with a wired test. Around 29% of consumers prioritise checking their online upload speed. |
| Simultaneous use and backhaul |
Check whether mesh nodes can connect by cable or wirelessly, which bands are available and how many Ethernet ports will remain free. |
When several people and work devices are active at the same time, I want to know how the nodes connect to each other and which ports will still be available. Around 24% of consumers prioritise capacity for simultaneous use. |
| Coverage at workstations |
Map out weak spots and decide where a mesh node can reach both your workstation and a usable connection to the network. |
If I work in different places around the house, I mainly want to know where the Wi-Fi falls short and where an extra node could go. Around 18% of consumers give top priority to coverage at their workstations. |
| File and network access |
Check the guest network and update features; set viewing and editing permissions separately in the file-sharing service. |
If visitors or team members need different levels of access, I don’t want to confuse Wi-Fi access with permissions for project files. Around 17% of consumers prioritise access management. |
| Keeping your existing router |
Check whether the system has a suitable access point mode and which features remain available in that mode. |
If I want to keep using my current router to manage the network, I’ll check in advance how the mesh system works with it. Around 12% of consumers give top priority to keeping their existing network setup. |
Common pitfalls when choosing mesh Wi-Fi
-
Buying a mesh system without testing your internet upload speed
A mesh system can tackle a weak Wi-Fi connection indoors, but it won’t fix a limitation with your internet upload speed. The Dutch Consumers' Association recommends testing your connection with a network cable and comparing it with Wi-Fi.
Test your connection using a cable first, then at your workstation, before deciding whether mesh is right for the problem.
-
Assuming combined Wi-Fi speeds are guaranteed per-user speeds
Advertised band speeds don’t measure file transfers at your workstation. The connection between mesh nodes and conditions when several people are online also play a part.
Compare the backhaul, ports and planned placement; don’t judge a model by its total speed figure alone.
-
Assuming a guest network controls file permissions
Wi-Fi access doesn’t automatically determine who can view or edit online project files. Microsoft explains that OneDrive access is managed separately.
Check both network access and the people, links and permissions in your file-sharing service.
-
Expecting the same router features in access point mode
According to TP-Link, certain Deco router features, including security and parental control features, aren’t available in the Deco app when using access point mode.
Before installation, check which features you need from your existing router and from the mesh system.
Brands to compare
TP-Link
According to TP-Link, the Deco X50 is a dual-band Wi-Fi 6 model with three Gigabit ports and optional Ethernet backhaul. The Deco XE75 Pro adds a 6GHz band and a 2.5 Gbit/s port.
- The X50 is worth considering if you can connect the mesh nodes by cable.
- The XE75 Pro offers an alternative if you’re connecting nodes wirelessly.
- Some Deco router features aren’t available in access point mode.
ASUS
According to ASUS, the ZenWiFi XT9 is a tri-band Wi-Fi 6 model with access point mode. ASUS lists Wi-Fi 7 and two 2.5 Gbit/s ports for the ZenWiFi BD4.
- The XT9 is worth comparing if you’re looking for an extra wireless 5GHz band; the BD4 is relevant if you’re planning a wired backhaul.
- According to ASUS, the BD4 doesn’t have a 6GHz band. Wi-Fi 7 or an advertised speed doesn’t, on its own, prove that online uploads will be faster.
FRITZ!
FRITZ! describes the Mesh Set 1700 as a system that can be used with an existing router or a compatible modem. A three-piece version is also available.
- Worth considering if you want to keep your existing router and value the option to expand.
- Check that the connection type and number of mesh nodes suit your space and network setup.
NETGEAR
The Dutch Consumers' Association lists a guest network and Ethernet backhaul among the features of the Orbi RBK852.
- These features are useful points of comparison if you’re assessing network access and a wired connection between nodes.
- The test result listed by the Dutch Consumers' Association is based on the three-piece version, so it shouldn’t automatically be treated as a separate measurement of the two-piece set.
Linksys
Linksys describes the Velop Pro 6E as a tri-band model with 6GHz support and both wireless and wired backhaul.
- Worth considering if you want to keep your options open between wireless and wired connections.
- The Dutch product information lists Gigabit ports; claims about range and speed aren’t independent measurements taken at your workstation.
Mesh Wi-Fi products at Joybuy
These mesh systems are designed to provide Wi-Fi coverage across several workstations. When choosing, consider the number of nodes and how they can connect to each other.
No image available
TP-Link Deco BE68 (2-pack)
A two-node system to compare if you want to connect two workstations and can use wired backhaul.
View at Joybuy
No image available
ASUS ZenWiFi BT8, tri-band Wi-Fi 7 (2-pack)
A two-node system to consider for several workstations if you’re looking for tri-band Wi-Fi 7.
The product name lists 2.4GHz, 5GHz and 6GHz bands.
View at Joybuy
No image available
TP-Link Deco X50, dual-band Wi-Fi 6 (3-pack)
A three-piece system to compare if you want to reach workstations in different locations and can use Ethernet backhaul.
The product name lists Wi-Fi 6 and 2.4GHz and 5GHz bands.
View at Joybuy
No image available
TP-Link Deco XE75 Pro, tri-band Wi-Fi 6E (3-pack)
A three-piece tri-band system to consider if you want to cover several workstations and are considering a wireless connection between mesh nodes.
The product name lists Wi-Fi 6E and 2.4GHz, 5GHz and 6GHz bands.
View at Joybuy
No image available
TP-Link Deco X50, dual-band Wi-Fi 6 (2-pack)
A two-node system to compare if two workstations need Wi-Fi coverage and you may be able to connect the nodes by cable.
The product name lists Wi-Fi 6 and 2.4GHz and 5GHz bands.
View at Joybuy
Frequently asked questions about mesh Wi-Fi and project files
Does mesh Wi-Fi make uploading project files to the cloud faster?
Only if Wi-Fi indoors is the bottleneck. Compare a wired test with one at your workstation; mesh won’t increase the upload speed of your internet connection.
Do mesh nodes need to be connected by cable?
No. Check whether each model supports wireless and Ethernet backhaul. If you connect the nodes by cable, the connection between them won’t depend on Wi-Fi passing through walls or floors.
Can you install a mesh system behind your existing router?
Yes, if the model offers a suitable access point mode. With Deco, the existing router remains responsible for things such as IP addresses, and some Deco router features aren’t available. Check the mode and version you choose.
Does a guest network give visitors access to shared project files?
Not automatically. Wi-Fi access and file permissions are separate settings: use your file-sharing service to decide which people or links can view or edit files.
Do you need a licence for Wi-Fi in the Netherlands, and what should you look for on the device?
According to the Dutch Authority for Digital Infrastructure, you don’t need a licence to use Wi-Fi at home or in a business premises, provided you use the designated frequencies and follow the conditions of use. Radio equipment sold in the EU must meet the applicable requirements and carry the correct CE marking.