First, decide where your project files will be stored: mesh Wi-Fi connects devices, but it isn’t automatically a shared storage location. If you already have storage, compare coverage, whether you can connect mesh nodes by cable and where each unit will go. If you want to share USB storage through your network equipment, check that the exact model supports this feature. A compact node may also offer fewer connections.
Who is this setup for?
Sharing project files locally
You want to access the same files from several devices. First, decide which device will store them: mesh Wi-Fi doesn’t provide storage itself, and USB file sharing varies by model. TP-Link says USB sharing is available on selected Deco models only.
Working in several locations
Your files are already available, but the wireless connection is inadequate in another workspace. Think about where to place the mesh nodes and whether you can connect them by cable. TP-Link describes ethernet backhaul for Deco as more stable and faster than the wireless connection between units.
Limited space for equipment
You don’t have much room for network equipment. Compare the dimensions and connections of the main unit and satellites separately, and consider where any storage devices and power supplies will go.
What should you look for?
Start by deciding where your files will be stored. Then work out whether coverage, wired connections, available space or easy setup matters most.
| What to consider |
What to check before buying |
Who is this important for? |
| Sharing files |
Decide where the files are stored and check whether the exact model supports USB file sharing. |
I want to access the same project files from several devices and know which device stores them. Around 33% of consumers say file sharing is their main buying concern. |
| Connection between workspaces |
Check whether you can run a cable between the mesh nodes you want to use and which ports are available. |
When I work in different places, I want a usable connection in each one and to know whether a wired connection is possible. Around 27% of consumers prioritise coverage between workspaces. |
| Space for each unit |
Compare the dimensions, power supply and connections of the main unit and satellites. Consider where the Wi-Fi node will go. |
With limited shelf space, I want to know in advance where each component will fit, without tucking a mesh node away without thinking. Around 20% of consumers say space for positioning is their main concern. |
| Setup and access |
Find out how to set up the exact model and what options are available for accessing shared USB storage. |
I want to make setup and file access practical, without assuming that one app configures both mesh and file sharing. Around 20% of consumers prioritise straightforward setup and access. |
Common buying mistakes
-
Assuming mesh Wi-Fi is a storage device
A better Wi-Fi connection doesn’t create a shared file location by itself. TP-Link lists USB file sharing for selected Deco models only; the FRITZ!NAS feature described is for a compatible FRITZ!Box.
First, decide where your project files will be stored. Then check whether the exact device supports the storage and access features you need.
-
Assuming a compact node means the whole set is compact
Linksys distinguishes between the LN1100 router and the smaller LN1200 node, which have different connections. So a satellite’s dimensions don’t tell you how much space the main unit needs.
Check what’s included in the box and measure the space for each component before choosing a set.
-
Assuming a different pack size is the same product
A model name may be used for a set with a different number of units. That number determines which components you receive when you buy it.
Compare the full model name and number of units with what you need for your home.
Brands to consider
TP-Link
Deco may suit a mesh setup with wired connections; check USB file sharing for each model.
- TP-Link specifies three gigabit ports per unit for the Deco X50, with optional ethernet backhaul.
- According to TP-Link, only selected Deco models have a USB port for file sharing. Don’t assume a model has this feature just because it’s made by the brand.
ASUS
The ZenWiFi BD4 is worth considering if its specified ports and dimensions suit your setup.
- ASUS specifies two automatically assigned WAN/LAN ports and dimensions of 140 × 70 × 140 mm for the BD4.
- This port specification doesn’t confirm USB file sharing; assess storage separately.
FRITZ!
The FRITZ!Mesh Set 1700 is an option for extending an existing router or modem.
- FRITZ! describes the three-piece set as three FRITZ!Repeater 1700 units that connect to an existing router or modem.
- The FRITZ!NAS feature described applies to a FRITZ!Box 7590 AX, not automatically to the mesh set.
Linksys
Velop Micro 6 is worth considering if space for satellite nodes is a key constraint.
- Linksys distinguishes between the LN1100 router, which has ethernet ports, and the LN1200 node.
- Linksys lists a USB-C power port for the LN1200. Check which components and connections are included in the set you choose.
Joybuy products
These mesh sets are suited to use with existing storage and wired network devices; mesh Wi-Fi itself isn’t shared file storage.
No image available
TP-Link Deco BE68 2-pack
Suited to a setup with existing storage and two mesh units for connectivity in several locations.
- Wi-Fi 7 and tri-band.
- Three wired ports per unit: 10 Gbps, 2,5 Gbps and 1 Gbps.
View at Joybuy
No image available
TP-Link Deco X50 3-pack
The three-unit set is suited to a setup where you want mesh connectivity in several locations.
- Dual-band Wi-Fi 6.
- Three gigabit ports per unit.
View at Joybuy
No image available
TP-Link Deco XE75 Pro 3-pack
Three mesh units and wired connections make this set suited to use in several locations with existing network devices.
- Tri-band Wi-Fi 6E.
- Three ethernet ports per unit.
View at Joybuy
No image available
TP-Link Deco XE75 3-pack
This three-unit mesh set is an option if you want to extend your connection to several locations.
- Tri-band Wi-Fi 6E.
- Three ethernet ports per unit.
View at Joybuy
No image available
TP-Link Deco X50 2-pack
This two-unit set is suited to a mesh setup covering several locations, with existing storage or network devices connected via ethernet.
- Dual-band Wi-Fi 6.
- Three gigabit ports per unit.
- Optional ethernet backhaul.
View at Joybuy
Frequently asked questions
Can I share project files as soon as I connect a mesh set?
No, not automatically: first decide which device will store the files. TP-Link describes USB file sharing for selected Deco models only; FRITZ! describes sharing storage connected via USB for a compatible FRITZ!Box.
Where should I place a mesh node if my shelves are full?
Measure the available space and check the dimensions of each component, but don’t choose based only on the smallest footprint. The Dutch Authority for Digital Infrastructure warns that a meter cupboard or a spot behind a TV can block the Wi-Fi signal.
What should I check when connecting Deco units by cable?
Follow TP-Link’s guidance for the router or access point mode you’re using, then check in the app that the satellite is using ethernet backhaul. Also allow for the cable route and make sure you have free ports.
Is ethernet backhaul always the right choice?
Only if you can connect the units by cable and have the necessary ports available. TP-Link describes ethernet backhaul for Deco as more stable and faster than the wireless connection between those units; this doesn’t tell you what transfer speed you’ll get in your home.