For sharing project files, wired backhaul is a sensible choice if you can run cables between the mesh nodes. TP-Link describes this as more stable and faster than Wi-Fi between the units, but it doesn’t guarantee a particular speed in your loft. If you can’t run cables, your choice mainly depends on the connection between the nodes in their planned positions. Then compare the ports, the number of units you need and how the system connects to your existing router.
Who is mesh Wi-Fi in a loft relevant to?
People sharing files across several workstations
You regularly share large project files between fixed workstations and want to assess the connection between nodes and the available network ports. TP-Link describes Ethernet backhaul options for Deco; Consumentenbond tests Wi-Fi and wired connections separately.
People who can’t run cables
You need Wi-Fi in several parts of your loft, but can’t connect the nodes with an Ethernet cable. The placement and wireless connection between nodes are then important considerations; Consumentenbond recommends placing Wi-Fi extenders where you want to improve the signal.
People using an existing router
You want to keep your existing modem or router and check how a new system connects to it and is managed. FRITZ! explains how to connect the Mesh Set 1700 to an existing router or ONT.
What should you look for in mesh Wi-Fi for project files?
Mesh with wired backhaul
A good fit if: you can run a suitable network cable between workstations or nodes and regularly transfer large files.
Bear in mind: the cable route and which ports will still be available once everything is connected.
Fully wireless mesh
A good fit if: running cables between nodes isn’t practical and you need Wi-Fi in several places.
Bear in mind: the connection depends partly on node placement; an extra Wi-Fi band alone doesn’t guarantee good reception through obstacles.
Wired workstation or access point
A good fit if: a reliable connection is mainly needed for one desktop computer or a workstation in a distant part of the loft, or cabling is already in place.
Bear in mind: a wired connection or a single access point won’t automatically provide mesh-network coverage and management everywhere.
| Consideration |
What should you check? |
Who is this important to? |
| File transfers |
Check support for Ethernet backhaul, port speed and whether you can connect computers or storage devices by cable. |
If I share large project files between fixed workstations, I want to know whether the nodes can be connected by cable. Around 36% of consumers rank reliable file transfers as their top priority. |
| Coverage in several places |
Map out workstations, obstacles, power sockets and possible node positions. Treat stated coverage areas as manufacturer claims. |
If I need Wi-Fi in separate parts of the loft, I want to know where the nodes can go and how they connect to each other. Around 29% of consumers prioritise coverage in several places. |
| Connection to the router |
Check which router or access point modes are supported, how the first node connects, and the available setup and management options. |
If I want to keep my existing router, I want to know in advance how the new system connects to it and is managed. Around 21% of consumers give this connection and management their top priority. |
| Complete setup |
Compare the number of units you need and the available ports; check whether you might need any additional network equipment. |
If I want to connect several workstations, I want to consider the system I need and any extra equipment together. Around 14% of consumers prioritise the cost of the complete setup. |
Common mistakes when buying mesh Wi-Fi
-
Assuming the stated Wi-Fi speed is the same as file transfer speed
Transfer speeds also depend on the connection between nodes, their placement and the wired connections. A maximum Wi-Fi speed doesn’t measure the entire local connection.
Compare the connection between nodes and the ports, and assess transfer speeds where you actually work.
-
Buying an extra node without checking the connection between them
More nodes can improve coverage, but they won’t automatically fix a weak connection between nodes.
Plan where to place them and first check whether you can run a cable between the nodes.
-
Counting every Ethernet port as a spare connection
A port used for the network connection or wired backhaul isn’t also available for a computer.
Make a note of the connections you want for each node before comparing the number of ports.
Brands to compare for this choice
TP-Link
The Deco X55 is a dual-band Wi-Fi 6 mesh system with three gigabit ports. This may be relevant if you need wired devices and Ethernet backhaul.
- TP-Link explains the requirements for wired Deco backhaul.
- The ports on the X55 mentioned here are gigabit ports; check that they suit your wired transfer needs. Manufacturer coverage figures aren’t a measurement for your loft.
ASUS
The Dutch ZenWiFi BD4 range is dual-band Wi-Fi 7 and, according to ASUS, has two auto-sensing 2.5G Ethernet ports.
- ASUS describes wired backhaul options for the BD4.
- With two ports per unit, consider your needs if you want to connect a network connection, backhaul and several wired devices at the same time. Stated Wi-Fi speeds aren’t measured file transfer speeds in a loft.
FRITZ!
The FRITZ!Mesh Set 1700 is designed to extend a mesh network and, according to the manufacturer, can connect to an existing router.
- FRITZ! explains how to connect via LAN to an existing router or ONT, and how to set up the system using an app.
- Check the LAN connections and the full cable route for the system you want. Connecting the system doesn’t prove that every node is wired in every setup.
NETGEAR
For Orbi, NETGEAR describes wireless and wired connections between the router and satellites, depending on the model.
- NETGEAR provides documentation on Ethernet backhaul and connections via a switch.
- Check the port specifications and instructions for the exact Orbi system; general guidance doesn’t necessarily apply to every model.
Mesh products at Joybuy
The products below are mesh systems or mesh routers for Wi-Fi in several places. Check the setup you need and the wired connections required for each model.
No image available
ASUS ZenWiFi BT8 (2-pack), tri-band Wi-Fi 7
A 2-pack for setting up mesh Wi-Fi in several places.
Tri-band (2.4 GHz/5 GHz/6 GHz); Wi-Fi 7 (802.11be).
View at Joybuy
No image available
TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6
A 3-pack for a mesh setup with nodes in several places.
Dual-band (2.4 GHz/5 GHz); Wi-Fi 6 (802.11ax). Wired backhaul is optional and requires a cable route between the nodes.
View at Joybuy
No image available
Huawei eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router
A mesh router for setting up a mesh network in several places.
BE3600; dual-band Wi-Fi 7.
View at Joybuy
No image available
Huawei eKit OptiX FG630 AX3000 dual-band Wi-Fi 6 mesh router
A mesh router for arranging Wi-Fi in several places.
AX3000; dual-band Wi-Fi 6.
View at Joybuy
No image available
ASUS ZenWiFi BT10 (2-pack), tri-band Wi-Fi 7
A 2-pack for a mesh setup with Wi-Fi in several places.
Tri-band (2.4 GHz/5 GHz/6 GHz); Wi-Fi 7 (802.11be).
View at Joybuy
Frequently asked questions
How can you check whether your Deco nodes are using the cable?
Select the satellite in the network map in the Deco app to see whether it’s connected via Ethernet backhaul. TP-Link explains how to check this and the cabling steps for the router or access point mode you’ve set up.
Does mesh automatically make sharing project files faster?
No, mesh alone doesn’t guarantee faster file transfers. Look at the entire local connection: the connection for both devices, the connection between nodes and the available Ethernet ports. Consumentenbond tests Wi-Fi and wired connections separately.
Do you need a permit or registration for ordinary home Wi-Fi in the Netherlands?
According to the Dutch Authority for Digital Infrastructure (Rijksinspectie Digitale Infrastructuur), Wi-Fi is generally exempt from licensing, and licence-exempt use of frequencies doesn’t require notification or registration. However, use must comply with the applicable conditions.
What should you look for to check whether a mesh node meets legal requirements?
Radio equipment placed on the market in the Netherlands must meet the applicable European requirements. The Dutch Authority for Digital Infrastructure (Rijksinspectie Digitale Infrastructuur) states that manufacturers affix a CE mark to compliant equipment; check the marking and product information for the specific device.