When sharing project files, start by looking at the entire network path: connect the source and destination via Ethernet where possible, and consider the available ports and the connection between mesh nodes, not just the advertised Wi-Fi speed. If running cables isn’t practical, first test a node in a spot where it still gets a good connection and doesn’t obstruct the narrow hallway. Before buying, also check the CE marking and conformity information for the exact version; the Dutch Authority for Digital Infrastructure (RDI) sets out these requirements for radio equipment sold in the Netherlands.
Who is this relevant for?
Someone sharing large project files
You regularly move files between a work computer and another device at home. In that case, the available ports and the connection between mesh nodes may matter more than the advertised Wi-Fi speed alone. TP-Link and ASUS outline the port options for their respective systems.
Someone with a tricky hallway
Your connection is weak beyond the hallway, and there’s little safe space to place equipment. First, work out where a node can be plugged in and still maintain a usable connection to the network. The Consumers’ Association recommends placing mesh nodes where they can maintain a connection to one another.
Someone who wants to keep their existing router
You want to keep using your modem or router, so you’re looking into how a mesh kit connects to it. FRITZ! explains that the Mesh Set 1700 can connect to an existing router or fibre modem; check that it’s compatible with your equipment.
What should you look for when choosing?
Wired backhaul and work devices
Choose this if: you can run a cable along a route that avoids the narrow hallway, and local devices regularly exchange project files.
Bear in mind: you’ll need to run a cable and configure your router or access point appropriately. Check how many ports will remain free once the modem and backhaul are connected.
Wireless mesh without running new cables
Choose this if: you can’t run cables and can place a node out of the way where it still gets a good connection to the previous node.
Bear in mind: the position and connection between the nodes matter; adding another node won’t automatically fix a weak connection.
Mesh that works with your existing router
Consider this if: you want to keep your existing modem or router and are looking for a mesh kit that can connect to it.
Bear in mind: connecting to a router doesn’t automatically mean every node can be wired in or will use the same roaming management.
| What to consider |
What to check before buying |
Who is this important for? |
| File transfers |
Count the free ports on each node after connecting the modem and any backhaul. Don’t compare the advertised Wi-Fi speed directly with the transfer speed of a single file. |
I want to share project files between local devices and need to know which connection is used along the entire path. Around 36% of consumers put file transfers first on their list. |
| Connection between nodes |
Check whether Ethernet backhaul is possible and whether you can run a cable. If you’re using wireless backhaul, test the intended location first. |
What matters most to me is having a usable connection beyond the hallway, preferably wired if possible. Around 29% of consumers focus mainly on the connection between mesh nodes. |
| Placement in the hallway |
Measure the available space and check the power sockets and cable routes. Test coverage at your workspace rather than relying on a claimed floor area. |
I need to fit a node somewhere without blocking the narrow passage, and I want it to maintain a connection there. Around 21% of consumers put placement first on their list. |
| Security and compliance |
Check which updates and settings are available, and whether the exact version has a CE marking and the relevant conformity information. |
I want to know how to secure my home network and whether the version meets the applicable requirements. Around 14% of consumers prioritise security and support. |
Common buying mistakes
-
Assuming the advertised Wi-Fi speed is the speed of a single file transfer
A combined speed across Wi-Fi bands doesn’t, on its own, tell you how quickly a file will transfer between two devices. The ports, devices and connection between mesh nodes also make a difference.
Map the route from source to destination and compare the usable ports and backhaul for that exact setup.
-
Buying an extra node without testing the connection at its intended location
A mesh node needs to maintain a connection to the network where you plan to place it. Putting it beyond a weak connection won’t automatically fix the problem.
Test the location before expanding your network, and look into wired backhaul if the wireless connection isn’t usable there.
-
Assuming a different pack size is the same product
A 2-pack and a 3-pack don’t contain the same number of nodes. Regional versions can also differ.
Compare the full model name, pack size, ports and regional version before matching an offer to a product name.
Brands compared
TP-Link
The Deco X50 range is worth considering if you want to compare the number of Ethernet ports per node and the option of wired backhaul.
- TP-Link lists three gigabit ports per X50 node, with optional Ethernet backhaul.
- The stated wireless speed and coverage aren’t a measure of project file transfer speeds in your home.
ASUS
The ZenWiFi BD4 is a dual-band Wi-Fi 7 option to compare if connection ports are important to you.
- According to ASUS specifications, the BD4 has two automatically assigned 2.5G WAN/LAN ports.
- Check how many ports will remain available in your setup. ASUS warns that the contents of the pack may vary by region.
FRITZ!
The Mesh Set 1700 is worth considering if you want to keep your existing router or fibre modem.
- FRITZ! describes connecting to an existing router or ONT and lists automatic updates.
- This is information from the manufacturer; check how each individual node can be connected in your setup.
devolo
The WiFi 7 Mesh BE6500 is worth comparing if you need to connect several wired devices to the mesh kit.
- devolo lists one 2.5G and three gigabit Ethernet ports for this kit.
- devolo describes the kit as dual-band, but also refers to 6 GHz and 320 MHz. So don’t use 6 GHz as a selection criterion without checking the exact version.
Products at Joybuy
These mesh Wi-Fi options are worth considering if you want to connect devices or mesh nodes by cable wherever possible. Also check whether you can place them in your narrow hallway. Before buying, check the CE marking and conformity information for the exact version, as required by the RDI for radio equipment sold in the Netherlands.
No image available
TP-Link Deco BE68 (2-pack)
Worth considering if you want to connect project devices by cable and are thinking about wired connections between mesh nodes. Check in advance that the cable route and port layout suit your setup.
View at Joybuy
No image available
ASUS ZenWiFi BD4, dual-band Wi-Fi 7 (2 units)
An option to compare if you want to connect devices by cable and are considering wired backhaul. Check how many ports will remain free after connecting the modem and mesh nodes.
The product name specifies dual-band Wi-Fi 7 and two units.
View at Joybuy
No image available
TP-Link Deco X50, dual-band Wi-Fi 6 (3-pack)
Worth considering if you want to connect several wired devices and can run a cable between mesh nodes. TP-Link lists three gigabit ports per X50 node, with optional Ethernet backhaul; check which ports will remain free in your setup.
The product name specifies dual-band Wi-Fi 6 and a pack of three nodes.
View at Joybuy
No image available
TP-Link Deco X50-PoE, dual-band Wi-Fi 6 (2-pack)
An option to compare if you’re factoring wired connectivity and power into your placement plans. Check that the required cables and connections will work where you plan to place each node.
The product name specifies dual-band Wi-Fi 6 and a pack of two nodes.
View at Joybuy
No image available
TP-Link Deco XE75, tri-band Wi-Fi 6E, 3 internal antennas
Worth comparing if you want to connect several devices by cable. Check how many ports are free on each node and test whether your chosen placement reaches the workspace you need it to.
The product name specifies tri-band Wi-Fi 6E and three internal antennas.
View at Joybuy
Frequently asked questions
Do I need a licence to use Wi-Fi at home in the Netherlands?
You don’t need a licence to use Wi-Fi on the designated licence-exempt frequencies, as long as you comply with the conditions of use. The RDI distinguishes between using Wi-Fi and the conformity of the device itself.
Can a mesh router without a CE marking be sold in the Netherlands?
Radio equipment sold in the Netherlands must meet the applicable requirements and carry a CE marking. The RDI emphasises that this applies to the version actually being sold, so check the marking and conformity information for the exact product.
Does an extra mesh node have to go in the middle of the hallway?
No, don’t automatically put a node in the middle of the hallway. Choose a spot where it can maintain a connection to the network and reach the room you need; test it there. If your system supports Ethernet backhaul, running a cable may give you another placement option.
What can I do to improve security after installation?
Use a strong password and install software updates; this is the advice from the Dutch government for smart devices. Also check which updates and security settings the manufacturer offers for your version.
Who should I contact if the system I’ve bought develops a fault?
To exercise your statutory warranty rights, you should contact the seller for a solution, according to the Dutch government—not just the manufacturer. Any additional warranty doesn’t replace those statutory rights.