Presenter with a weak Wi-Fi signal
You present from a room beyond the hallway and want to find out where the connection drops out before buying additional Wi-Fi nodes. The Consumentenbond recommends checking the placement and connection.
First, test with an Ethernet cable and over Wi-Fi to find out whether the problem lies with your internet connection or your home Wi-Fi. Mesh is only a sensible choice if you need coverage in several places and the additional node can still receive a usable signal, as the Consumentenbond and TP-Link Netherlands explain. If you can run a cable to the presentation room, compare a wired access point with mesh using Ethernet backhaul. For local casting, your laptop and screen must also be able to find each other on the network, according to Google Streaming Help.
You present from a room beyond the hallway and want to find out where the connection drops out before buying additional Wi-Fi nodes. The Consumentenbond recommends checking the placement and connection.
You want to cast from a laptop or phone to a screen, so as well as checking the signal, you need to make sure both devices can find each other on the network. Google Streaming Help explains this network requirement for Google Cast.
You may be able to run an Ethernet cable to another room and want to weigh up a wired access point against wireless mesh or Ethernet backhaul. TP-Link Netherlands describes Ethernet backhaul as an option for the Deco X50.
If possible, move your router first and test again. Only choose mesh if the additional node can still get a usable connection where you place it. If running a cable isn’t practical, you could try powerline in your own home, but don’t assume you’ll get a particular result.
| Consideration | What should you check? | Who is this important for? |
|---|---|---|
| Coverage and placement | Test at the presentation spot and at a possible location for the additional node. Also try moving the router. | If I present beyond the hallway, I want to know where the signal drops out before buying an additional node. Around 36% of consumers are mainly concerned with coverage and placement. |
| Connection during the presentation | Compare a test over an Ethernet cable with Wi-Fi at the presentation spot, and try your own presentation setup. | If I experience interruptions, I want to find out first whether the cause is the internet or the Wi-Fi at home. Around 29% of consumers share this concern. |
| Cabling and existing router | Check whether there’s a route for a cable, which ports are available and whether your chosen mesh model supports Ethernet backhaul. | If I want to keep my existing router, I want to know whether I can extend the network using a cable and what the installation involves. Around 21% of consumers are mainly concerned with this connection. |
| Access to the local screen | For Google Cast, check the network used by your laptop and screen, local network access and any access restrictions for guest devices. | If I cast to a screen on the local network, my laptop needs to be able to find it. Around 14% of consumers have this particular need. |
Your home’s layout and obstacles affect the connection where you present. An advertised speed is not a measurement taken at that location.
Test where you plan to put the additional node and in the presentation room. Where possible, compare the results with a wired connection.
A device on a separate network may not be able to find the local casting screen. With Google Cast, the devices must be able to communicate with each other over the network.
Before your presentation, test your specific casting method with the laptop and screen, and check what access guest devices have.
The number of nodes varies between models; being part of the same model range doesn’t mean the set is the same.
Compare the full model name, number of nodes, connections and model variant before choosing a set.
The Deco X50 is a Wi-Fi 6 mesh system worth comparing if you want to use several Wi-Fi nodes.
The Mesh Set 1700 and Repeater 1700 are worth considering if you want to keep your existing router or connect a node via LAN.
The ZenWiFi BD4 is worth comparing if you want to factor Wi-Fi 7 and wired connections into your choice.
According to devolo, Magic 2 WiFi 6 next combines mesh Wi-Fi with a connection over your home’s electrical wiring. It’s an alternative if running an Ethernet cable is difficult.
These mesh products are designed to provide Wi-Fi in several rooms. Compare the number of nodes, Wi-Fi generation and any wired options with your test results. The Dutch Authority for Digital Infrastructure states that radio equipment sold in Europe must carry the required CE marking. Check this for the exact model.
No image available
Worth comparing if you’re looking for three mesh units to cover several rooms.
Dual-band (2.4 GHz and 5 GHz); Wi-Fi 5 (802.11ac).
No image available
Worth comparing if you’re looking for three mesh units and are considering a wired connection between them.
Dual-band (2.4 GHz and 5 GHz), Wi-Fi 6 (802.11ax) and three gigabit Ethernet ports per unit. Ethernet backhaul is an option.
No image available
Worth comparing if you’re looking for a dual-band mesh router for a network with multiple units.
Dual-band Wi-Fi 7; according to the product description, multiple units can form a single SSID network.
No image available
Worth comparing if you’re looking for a dual-band mesh router for a network that covers several rooms.
Dual-band Wi-Fi 6; the product description lists mesh technology.
No image available
Worth comparing if you’re considering a mesh set with two units and a wired connection.
Tri-band (2.4 GHz, 5 GHz and 6 GHz), Wi-Fi 7 (802.11be) and 10-gigabit Ethernet ports.
First, test your internet connection using an Ethernet cable, then compare it with Wi-Fi at the presentation spot. This can help you work out whether the problem is upstream of your Wi-Fi network or with the wireless connection in your home. The Consumentenbond recommends a wired test for this comparison.
Don’t automatically put the node at the furthest point away: it still needs a usable connection to the first node. Try different positions and test in the presentation room. If the wireless connection between nodes remains weak, compare it with Ethernet backhaul if you can run a cable.
With Google Cast, check that both devices are on the right Wi-Fi network and that the casting app has permission to access the local network. A guest network may require separate access to shared devices; other presentation methods may have different requirements.
Check how many nodes you need, whether you can run a cable and the warranty terms for the exact model. FRITZ! lists a five-year warranty for the Repeater 1700; this manufacturer’s warranty doesn’t automatically apply to other models.
According to the Dutch Authority for Digital Infrastructure, Wi-Fi on the designated frequencies does not require notification or registration, provided you follow the conditions of use. Radio equipment sold in Europe must meet the applicable CE marking requirements. Check the marking on the exact model.