Who might benefit from mesh Wi-Fi?

Portfolio uploader

You send large files from a study and want to find out whether your internet connection or your home Wi-Fi is limiting your upload speed. The Consumers’ Association (Consumentenbond) recommends running a speed test on a computer connected to your home network by Ethernet cable.

Study at the far end of the home

You need a usable connection in a room beyond floors or walls, and running an Ethernet cable isn’t an obvious option.

Home with an Ethernet cable

You can connect your study by cable and want to make the connection between mesh points less dependent on wireless coverage. TP-Link describes Ethernet backhaul for Deco points; ASUS says its Ethernet backhaul mode requires nodes to be connected by cable first.

What should you look for?

Ethernet backhaul

Choose this when: you already have an Ethernet cable running to or near your study.

Bear in mind: you’ll need to run and connect cables, and check the ports and settings on your chosen system.

Fully wireless mesh

Choose this when: running cables isn’t practical and you can position an extra point where it still receives a usable signal.

Bear in mind: walls, floors and placement affect the connection between points. Advertised Wi-Fi speeds don’t predict upload speeds in your room.

Powerline backhaul

Consider this when: you can’t run a cable and floors or walls interfere with the wireless connection between points.

Bear in mind: TP-Link describes the Deco PX50 as a system that communicates over your home’s electrical wiring, but this doesn’t guarantee a particular speed in your home.

What to consider What to look for Who it matters most to
Upload speed Test the connection by cable at the router and compare it with a test in your study. When I send large portfolio files, I want to know whether my internet connection or Wi-Fi is limiting uploads; around 36% of consumers prioritise a usable upload speed.
Wireless coverage Find a spot for an extra point where it can still receive a usable connection. Without a cable to my study, I still want a usable signal there; around 29% of consumers give wireless coverage top priority.
Wired connection Check for Ethernet backhaul support, available ports and connection instructions. If there’s already an Ethernet cable in place, I want to use it to connect the points; around 21% of consumers put wired reliability first.
Installation and use Compare the setup process, number of points required, updates and power consumption. I want a system that’s easy to install and to understand what day-to-day use involves; around 14% of consumers prioritise installation and ongoing costs.

Common pitfalls

  • Assuming the advertised Wi-Fi speed is the upload speed you’ll get in your study

    Your internet provider’s connection and your home Wi-Fi coverage are two different potential bottlenecks. A new mesh system won’t fix a limitation with your internet connection.

    First, test by cable at the router, then test at your desk. Compare upload speeds, rather than just download speeds or the advertised Wi-Fi speed.

  • Putting a wireless mesh point in the spot with the weakest signal

    A satellite still needs a usable connection to the rest of the mesh network. Adding a point won’t automatically help if the connection is already weak where you place it.

    Find a spot where the point still receives a usable signal and test the connection there. Consider using a cable if one is available.

  • Assuming which ports and backhaul you’ll get from the product title alone

    For a wired setup, the system must support the type of backhaul you want and have the right connections available.

    Before connecting a wired computer or linking points, check the ports and what they’re used for on the exact model.

    If the connections you need aren’t available, you may need to run a separate cable or choose a different set.

Brands to consider

TP-Link

The Deco range includes mesh systems with Ethernet backhaul, as well as a powerline option in the PX50 range.

  • TP-Link describes Ethernet backhaul as a way to connect Deco points by cable. The manufacturer describes the PX50 as an option where points communicate over your home’s electrical wiring.
  • These product descriptions don’t predict upload speeds in your home. Check the ports and what’s included with the exact model.

ASUS

The ZenWiFi XT9 and AiMesh are worth considering if you’re looking for a configurable system with several Ethernet ports.

  • ASUS lists tri-band Wi-Fi 6, one 2,5G WAN port and three gigabit LAN ports for the XT9.
  • According to ASUS, nodes must be connected by cable first to use its general Ethernet backhaul mode. Advertised radio speeds aren’t measured upload speeds.

NETGEAR

The Orbi RBK763S is an example of a three-piece tri-band set.

  • NETGEAR describes the RBK763S as having a dedicated connection between the router and satellite, and lists seven gigabit ports across the complete set.
  • The coverage and speed quoted by the manufacturer don’t predict how well a study in your home will be reached. Consider how many points you’ll need.

FRITZ!

The Mesh Set 1700 is worth considering if you want to extend an existing network.

  • FRITZ! describes a two-piece set that can be connected to another router via LAN.
  • Check the exact setup with your existing router; a Wi-Fi 7 label alone says nothing about the upload speed you’ll get in your room.

devolo

WiFi 7 Mesh BE6500 is a dual-band system available in sets of two or three points.

  • devolo lists one 2,5G port and three gigabit ports on each device.
  • Consider the actual wireless connection between the points; the combined advertised Wi-Fi speed isn’t a guarantee of upload speed.

Mesh Wi-Fi at Joybuy

These mesh systems are suited to connecting a study at the far end of your home; models vary in features such as the number of points and the Wi-Fi specifications listed. For the exact model, also check that the equipment carries the correct CE marking, as required for radio equipment sold in the Netherlands.

TP-Link Deco BE68 2-pack

TP-Link Deco BE68 (2-pack)

This set of two mesh points could suit you if you want to connect a room at the far end of your home and are considering a wired connection between points.

Joybuy
TP-Link Deco X50 3-pack dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6

This set of three points could suit you if you want to use several mesh points and connect devices by cable.

The product name specifies dual-band Wi-Fi 6 (2,4 GHz and 5 GHz).

Joybuy
TP-Link Deco XE75 Pro 3-pack tri-band Wi-Fi 6E

TP-Link Deco XE75 Pro (3-pack), tri-band Wi-Fi 6E

This set of three mesh points could suit you if you want to use several points and connect wired devices too.

The product name specifies tri-band Wi-Fi 6E.

Joybuy
TP-Link Deco XE75 tri-band mesh Wi-Fi 6E

TP-Link Deco XE75, tri-band Wi-Fi 6E

This model could suit you if you want to use several mesh points to connect a room at the far end of your home.

The product name specifies tri-band Wi-Fi 6E and three frequency bands: 2,4 GHz, 5 GHz and 6 GHz.

Joybuy
TP-Link Deco X50 2-pack dual-band Wi-Fi 6

TP-Link Deco X50 (2-pack), dual-band Wi-Fi 6

This two-piece set could suit you if you want to connect a room at the far end of your home and are considering Ethernet backhaul.

The product name specifies dual-band Wi-Fi 6.

Joybuy

Frequently asked questions

Will mesh make my portfolio uploads faster if my broadband package has a low upload speed?

No. Mesh can’t remove the limitations of your internet connection. First, test by cable. If uploads are still slow, look into your connection or speak to your provider before buying mesh.

Does a wireless mesh point need to go right in the study at the far end of the home?

Not necessarily. With wireless backhaul, the point itself still needs to receive a usable signal; floors, walls and placement all play a part. Supported Ethernet backhaul makes the connection between points less dependent on wireless coverage.

Can I connect mesh to my existing router?

It depends on the system and the settings you choose. FRITZ! describes the Mesh Set 1700 as connecting to another router via LAN. Follow the instructions for your exact set and check that the mode you choose works with your existing router.

Which Dutch product requirement is relevant when buying a mesh router?

Radio equipment sold in the Netherlands must meet European requirements and carry the correct CE marking. The Dutch Authority for Digital Infrastructure (Rijksinspectie Digitale Infrastructuur) lists Wi-Fi routers among the devices that should carry this marking; check this for the exact model.

What if a mesh point develops a fault after the manufacturer’s warranty has expired?

The end of a commercial warranty doesn’t automatically end your statutory rights. According to ACM ConsuWijzer, the seller remains responsible for a faulty product that has been used normally; the remedy depends, among other things, on what you could reasonably expect from the product.